Panasonic Network Camera Bl C30a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 21
1.3 Viewing Multi-Camera page
To view multiple cameras on the Multi-Camera page, you need to configure each 
camera on the Multi-Camera Setup page (see page 55).
1.Access the camera (see page 8).
 The Top page is displayed.
2.Click the [Multi] tab at the top of the page.
 Multi-Camera page can display up to 12 camera images.
3.Close the web browser.
Notes
 When selecting [All] at the View Type, all...

Operating Instructions
22
 When viewing video (Motion JPEG), we recommend using an Ethernet® 
switching hub instead of the repeater hub to prevent degradation in video 
display.
 Due to the network congestion or the number of accesses, the refresh 
interval may slow down.
 When the refresh interval is slow, restrict the bandwidth on the Network 
page (see page 33). The refresh interval may be improved.
 If the video (Motion JPEG) display is limited (see page 52), the video will 
be changed to...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 23
1.4 Viewing Buffered Image page
To buffer the images on the internal memory, you need to set up image transfer 
settings (see page 57 or page 64). You can view buffered images on this Buffered 
Image page.
1.Access the camera (see page 8).
 The Top page is displayed.
2.Click the [Buffered Image] tab at the top of the page.
3.Click the trigger number.
The trigger number is displayed (see page 57 or...

Operating Instructions
24
4.Display images clicking buttons below.
Notes
 Date, Time and frame number are not displayed in play mode.
 Maximum number of buffered images change depending on resolution, image 
quality and what object the camera buffers. At the 320 x 240 pixels resolution 
and the standard quality, the camera buffers about 250 frames (see page 108). 
(If 3 trigger settings are enabled, the internal memory capacity is divided into 
3 sections. In this case, each trigger can buffer about 80...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 25
1.5 Viewing Still Images on Your Mobile Phone
You can view still images over the Internet from a compatible mobile phone.
Enter http://IP address (or URL):Port Number/mobile
 on a mobile phone and 
press [OK]. 
 When the port number is set to 80 (default), it is not required.
 When an authentication window is displayed, enter the administrators or the 
general users user name and password.
 A still...

Operating Instructions
26
Notes
 If the image is not displayed properly, try the following 2 URLs.
 Only an administrator can control privacy mode.
 In privacy mode, sensor and timer image buffer/transfer features also are 
stopped. 
 When executing [Privacy Mode] while setting [Allowing unregistered users] on 
the Security: Administrator page (see page 46), an authentication window is 
displayed. Log in to the camera as an administrator.
 If the users are restricted to level 1 or 2 on the General...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 27
2 Various Camera Features
2.1 Using Camera Features
1.Access the camera (see page 8).
Notes
 When [Allowing unregistered users] is set on the Security: Administrator 
page, click [login] tab and log in as an administrator.
 When users other than an administrator are accessing the camera, the 
[Setup] and [Maintenance] tabs are not displayed.
 The Top page is displayed.
2.Click [Setup] tab at the top...

Operating Instructions
28
Basic
(1) NetworkConfigures the network settings such as connection mode 
to connect the camera to the network (see page 30).
(2) WirelessConfigures wireless network (see page 34).
(3) UPnPEnables automatic port forwarding or shortcut to the 
camera (see page 37).
(4) Viewnetcam.
comRegisters with the Viewnetcam.com service (see page 38).
(5) Date and TimeSets the date and time, automatic time adjustment and 
adjust clock for daylight saving time settings (see page 40).
(6)...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 29
(13) Indicator 
ControlSets indicator display (see page 76).
(14) Privacy ModeEnables privacy mode (see page 77). 

Operating Instructions
30
2.2 Connecting the Camera to Your Network
The Network page offers three options to configure the camera.
 [Automatic Setup] automatically assigns an unused IP address to the camera, 
and uses UPnP to configure your router.
 [Static] allows the user to use a specific IP address.
 [DHCP] is offered for ISPs who require this option.
1.Click [Network] on the Setup page.
2.Select a connection mode.
 Each page is displayed (see page 30—page 31).
3.Enter each parameter in the...