Panasonic Network Camera Bl C30a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 41
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Date and Time page].
 The Date and Time page is displayed.
Note
Date and time settings become incorrect depending on the length of power-on 
time or the internal temperature. Using the Automatic Time Adjustment is 
recommended.Setting Description
Time Setting  Select date and format (AM/PM...

Operating Instructions
42
2.7 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power 
source frequency and pan/tilt range.
1.Click [Camera] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 43
Setting Description
Camera Name  The camera name is displayed on the Single Camera 
page.
 Enter ASCII characters (see page 107) or characters in 
each language (1—15 characters for a 1-byte character 
and 1—7 characters for a 2-byte character). But [Space], 
[], [], [&], [] are not available.
White Balance Select from the following options.
 Auto (default) — Automatic adjustment
 Fixed Indoor —...

Operating Instructions
44
3.Click [Save] when finished.
 New settings are saved. If the home position is changed, the camera turns 
to the home position.
 When finished, Success! is displayed.
4.Click [Go to Camera page].
 The Camera page is displayed. Tilt Range
*1Select from the following options.
 Minimum — Current settings, -40—+10
 Home Position
*2— Current settings, -40—+10
 Maximum — Current settings, -40—+10
 The values must be selected as minimum home 
position maximum.
*1See page 45 for...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 45
Specifying Pan/Tilt Range
1.
Access the camera (see page 8), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 42).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
 Selecting [Current] displays the current angle of the camera. Select each 
value while adjusting the pan/tilt on the Single Camera...

Operating Instructions
46
2.8 Changing Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, 
administrator user name and password. The authentication window is displayed, 
and allows the registered users to access the camera.
Notes
 If you access the camera for the first time, the window to set administrator user 
name and password is displayed. Make a note of the user name and password 
so that you will not forget them.
...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 47
Note
When users other than an administrator are accessing the camera, [Setup] 
and [Maintenance] tab will not be displayed.
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.Setting Description
General 
AuthenticationAuthentication has 2 phases.
 If you set [Permit access from guest users], the camera 
does not display the authentication window in camera...

Operating Instructions
48
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Notes
 When the user name and password have been changed, the camera 
displays an authentication window. Enter the user name and password, 
and click [OK].
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered users. Set [Permit access from guest users] 
on the Security: Administrator...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 49
2.9 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] is displayed at the top of the page. After you log in as an administrator, you 
can access the Setup page and the Maintenance page.
1.Click [Login] at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and...

Operating Instructions
50
2.10 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] on the Security: Administrator page, the 
access level can be set for guest users.
1.Click [General Users] on the Setup page.
2.If you create a general user, click [Create].
3.Set each parameter. When setting [Do not...