Panasonic Network Camera Bl C30a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 51
4.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.Setting Description
User ID List  Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 107). But [Space], [], [], 
[&], [] and [:] are not available.
Access Level Access level is set for each general user. Each level offers 
different operations.
 Level 1 users view only image.
 Level 2 users view the image and operate only preset 
buttons.
 Level 3 users view the image and control all operations. 
						

							Operating Instructions
52
2.11 Changing Initial Settings on the Single 
Camera page or the Multi-Camera page
The Image Display page allows you to change initial settings (display settings when 
a user accesses the camera) of image resolution, image quality and refresh 
interval. Motion JPEG display time can be set here.
1.Click [Image Display] at the top of the page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 53
3.Click [Save] when finished.
 New settings are saved.Setting Description
Image Resolution  Select the image resolution.
640 x 480 pixels (Only for the Single Camera page)
320 x 240 pixels (default)
160 x 120 pixels (Only for the Multi-Camera page)
Image Quality  Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality.
[Favor Motion] optimizes for enhanced motion.
Refresh Interval  Select a refresh interval.
(Motion—60-second interval)
Limit Continuous 
Motion JPEG
 Limit time of 
Continuous 
Motion JPEG
Refresh 
Interval Set the time to change the video (Motion JPEG) to still 
images. (10 seconds—Unlimited)
 Set a refresh interval after the image is changed to still 
images. (3-second interval—60-second interval)
Language  Select the initial language from English, French, 
German, Italian, Spanish, Russian, Simplified Chinese 
or Japanese. The selected language is displayed as 
the initial language on the Top, Single Camera and 
Multi-Camera page. If you select English or Japanese, 
all pages can be changed. But if you select other 
language, the Setup, Maintenance and Support pages 
are displayed only in English.
Banner Display  When the camera accesses the Internet, the banner 
displays product information about cameras or 
announcements about the latest firmware, etc. from 
Panasonic. Checking [Display] for Administrator is 
particularly recommended.
 When checked, the banner is displayed for 
administrator or general users or both.
 The banner is displayed only on the Single Camera 
page (see page 10). 
						

							Operating Instructions
54
 When finished, Success! is displayed.
4.Click [Go to Image Display page].
 The Image Display page is displayed. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 55
2.12 Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure the camera IP addresses 
and camera names to view multiple images on the Multi-Camera page (maximum 
12 cameras). These configurations are required to use the Multi-Camera page.
1.Click [Multi-Camera] on the Setup page.
2.Click [Add].
Notes
 If you click the camera number, the modification page is displayed. The 
camera setting can be modified or deleted on it.
 If you configured multiple cameras, you can change the camera number. 
Select the number, and click [Move].
3.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 
						

							Operating Instructions
56
Notes
 If your camera will only be accessed on your local network, use each 
cameras local IP address and port number.
 If you intend to access your camera from the Internet, you must use each 
cameras global IP address and respective port number.
4.Click [Save] when finished.
 New settings are saved.
 The Multi-Camera Setup page is displayed.Setting Description
Display  Check the box to enable the camera.
IP Address
*1 or 
Host Name*2 Set the IP address or the host name to enable the camera.
Port No.  Set the port number (1—65535).
Camera Name
*3 This camera name is displayed only on the Multi-Camera 
page.
*1Set 4 digits (0—255) and 3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available.
*2Enter ASCII characters for the host name (see page 107). But [Space], [], [], 
[#], [&], [%], [=], [+], [?], [] are not available.
Enter 1—255 characters.
*3Enter ASCII characters (see page 107) or characters in each language (1—15 
characters for a 1-byte character and 1—7 characters for a 2-byte character). 
But [Space], [], [], [#], [&], [%], [=], [+], [?], [:], [] are not available. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 57
2.13 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete this buffered images.
 Click [Save] to save the settings. The buffered images are deleted.
 Clicking [Cancel] takes you back to the Image Buffer/Transfer page without 
saving changes.
Setting Description
Enable Image 
Buffer/Transfer Check the box to enable the buffer/transfer. Clear the box 
to disable it.
Trigger  Selecting [Timer] enables the camera to buffer/transfer the 
image by timer.
 Selecting [Sensor] enables the camera to buffer/transfer 
the image by sensor. 
						

							Operating Instructions
58
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 40).
 Clicking [].
 Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 59
6.Set the image buffer frequencies, and click [Next>].
 Clicking [
						

							Operating Instructions
60
7.Select the transfer method, and click [Next>].
 Clicking [