Panasonic Network Camera Bl C10a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 51
2.12 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click 
[Next>].
• Click [Delete Buffered Images] to delete this buffered images.
• Clicking [Cancel] takes...

Operating Instructions
52
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 35).
• Clicking [].
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 53
6.Set the image buffer frequencies, and click [Next>].
• Clicking [

Operating Instructions
54
7.Select the transfer method, and click [Next>].
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 55
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
56
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 57
8.Confirm the settings, and click [Save].
• New settings are saved.
• When finished, "Success!" is displayed.
9.Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Notes
• If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we 
recommend you to set a long interval. In an...

Operating Instructions
58
2.13 Buffering or Transferring Images by Sensor
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Sensor] for trigger, and click 
[Next>].
• Click [Delete Buffered Images] to delete this buffered images.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page 
without saving changes.
Setting...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 59
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 35).
• Clicking [].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the sensor position.
• Clicking [

Operating Instructions
60
6.Set the image settings, and click [Next>].
• Clicking [