Panasonic Network Camera Bl C10a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 11
Security Warning window
To view a video (Motion JPEG), ActiveX® Controls must be installed. When trying 
to display a video for the first time, Security Warning window will be displayed. 
When using Windows 2000 or Windows XP, log in as an administrator to install it.
If you cannot install ActiveX Controls or you cannot see the video in the 
Internet Explorer
• Click [Tools] [Internet Options]...

Operating Instructions
12
1.2.1 Bringing the Clicked Point to Center (Crick to 
Center)
When you click a certain point on the camera image, the point is centered on the 
image.
1.Move the cursor to the desired point.
2.Click it.
• The clicked point is centered.
• See page 15 for the pan/tilt operation.
Notes
• When End Display appears on the operation bar, Click to Center does not 
work beyond the pan/tilt end (see page 14).
• The clicked position may slightly miss the center depending on the lens...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 13
1.2.2 Capturing a Still Image
A still image can be saved on your PC.
1.Operate pan/tilt and select a resolution to display an image.
2.Click the capture image button.
• The camera image opens in another window.
3.Right-click the image, and select [Save Picture As...].
• Save as dialog box is displayed.
4.Specify the location, and click [Save].
• Camera image is saved at that location.
5.Click [Close]....

Operating Instructions
14
1.2.3 Using Operation Bar
Note
When the camera image is not displayed correctly, click [Refresh] at the tool 
bar on the web browser. The image will be refreshed.End Display 
and Preset 
Display:When the pan/tilt has reached the end (Left 
End, Right End, Up End and Down End), End 
Display appears. When clicking a preset button, 
the preset name appears.
Pan/Tilt 
Scan:Moves the lens throughout the horizontal ( ) 
or vertical ( ) range, and returns to the original 
position....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 15
Pan/Tilt Operation
Pan/Tilt Range
Note
Do not apply pressure to the pan/tilt portion of the camera. Any forced 
movement can damage the internal mechanism. Pan/tilt scan buttons automatically move the 
lens horizontally from -50 ° to +50 ° and 
vertically from -40 ° to +10 ° and return the 
lens to the original position. Each pan/tilt 
arrow moves the lens Up, Down, Right or 
Left, and the home...

Operating Instructions
16
1.2.4 Setting Home Position/Sensor Position/Preset 
Button
The home position, sensor position and 8 preset buttons can be registered. Preset 
buttons (1—4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4: 
Lower Right. These buttons can be changed (see page 19). 
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
When clicking each button, the image switches to the home/sensor/preset position. 
When restarted, the camera takes a...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 17
Registering a Preset Button
1.
Click [Program].
• [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
3.Click a preset button (1—8) to register.
E.g.:
Setting "Middle" for the preset 5.
4.Enter the preset name.
• Maximum 15 characters.
• Enter ASCII characters (see page 
96) or characters in each language. 
But...

Operating Instructions
18
Viewing the Image
1.
Click the home position, sensor 
position or registered preset button.
• The camera takes each position, 
and the image is displayed.
Sensor 
Position
Pan/Tilt
Putting the 
cursor displays 
the preset 
name.Home 
Position
UpperLeft 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 19
Changing or Deleting the Settings
1.
Click [Program].
• [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
3.Click the home position, sensor position 
or a preset button (1—8).
4.Click [Save] after setting the preset 
name or click [Delete].
• The bar switches to the operation 
bar.
• Clicking [Back] takes you back to 
the...

Operating Instructions
20
1.3 Viewing Multi-Camera page
To view multiple cameras on the Multi-Camera page, you need to configure each 
camera on the Multi-Camera Setup page (see page 49).
1.Access the camera (see page 8).
• The Top page is displayed.
2.Click the [Multi] tab at the top of the page.
• Multi-Camera page can display up to 12 camera images.
3.Close the web browser.
Notes
• When selecting [All] at the View Type, all images are displayed in 160 x 
120 pixels resolution.
• 640 x 480 pixels image...