Panasonic Network Camera Bl C10a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 31
Default Gateway*1
(Static/DHCP Only)• If you have the assigned Default Gateway address by your 
ISP or network administrator, enter it in this data field.
• Set 4 digits (0—255) and 3 periods such as 
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are 
not available.
DNS Server 
Address
*1
(Static/DHCP Only)• DNS server address is required in the following conditions.
•...

Operating Instructions
32
2.3 Using UPnP (Universal Plug and Play)
UPnP can automatically configure your router to be accessed from the Internet. In 
order to use this feature, your router needs to support this feature and it must be 
enabled. Most router manufacturers disable this feature as the default setting. See 
http://panasonic.co.jp/pcc/products/en/netwkcam/technic/rtr_setup for 
details and see your router manual for how to enable UPnP. After the UPnP is 
enabled on the router, set [Enable] for...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 33
2.4 Registering with the Viewnetcam.com service
Viewnetcam.com is a free service (dynamic DNS service) that allows you to assign 
an easy to remember name to the camera, similar to your favorite web site. 
Viewnetcam.com also allows you to easily access the camera, even when your ISP 
changes the IP address. Panasonic Communications recommends you to register 
with it for the Internet access to the...

Operating Instructions
34
Notes
• When the Viewnetcam.com registration website is not displayed, confirm 
that the URL is displayed in the right column of the Your Account Link. If 
the URL is not displayed, follow the procedures below.
• Personal (Camera) URL is available after you registered with the 
Viewnetcam.com service.
• If port forwarding is not enabled or your network is not connected to the 
Internet, the Viewnetcam.com service is not available.
6.Register with the Viewnetcam.com service...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 35
2.5 Setting Date and Time
The Date and Time page allows you to set date and time. Date and time are used 
for image buffer/transfer, operation time and time stamps on the buffered image.
Note
Saving the date and time settings deletes all buffered images.
1.Click [Date and Time] on the Setup page.
2.Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
36
3.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
4.Click [Go to Date and Time page].
• The Date and Time page is displayed.
Note
Date and time settings are subject to change due to the temperature. Date and 
time settings may lose about 1 minute per month in 25 °C (77 °F). They may 
lose more minutes in colder or hotter places. Confirm the date and time 
settings once a month.Setting Description
Time Setting • Select date...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 37
2.6 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power 
source frequency and pan/tilt range.
1.Click [Camera] on the Setup page.
2.Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
38
Setting Description
Camera Name • The camera name is displayed on the Single Camera 
page.
• Enter ASCII characters (see page 96) or characters in 
each language (1—15 characters for a 1-byte character 
and 1—7 characters for a 2-byte character). But [Space], 
["], ['], [&], [] are not available.
White Balance Select from the following options.
• Auto (default) — Automatic adjustment
• Fixed Indoor — Electric bulb (2800 K) 
• Fixed Fluorescent 
(White)— White (3600 K)
•...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 39
3.Click [Save] when finished.
• New settings are saved. If the home position is changed, the camera turns 
to the home position.
• When finished, "Success!" is displayed.
4.Click [Go to Camera page].
• The Camera page is displayed. Tilt Range
*1Select from the following options.
• Minimum — Current settings, -40—+10
• Home Position
*2— Current settings, -40—+10
• Maximum — Current settings,...

Operating Instructions
40
Specifying Pan/Tilt Range
1.
Access the camera (see page 8), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 37).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
• Selecting [Current Settings] displays the current angle of the camera. 
Select each value while adjusting the pan/tilt on the Single Camera page.
Note
The values must be selected as minimum home position...