Panasonic Network Camera Bl C10a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 71
3 Camera Maintenance
3.1 Maintenance page
Maintenance
(14) StatusDisplays the camera settings and status (see page 72).
(15) RestartRestarts the camera (see page 72).
(16) Update FirmwareUpdates the camera firmware (see page 73).
(17) Save SettingsCreates a configuration file (see page 76).
(18) Load SettingsLoads settings from a configuration file (see page 77).
(19) Reset to Factory 
DefaultResets...

Operating Instructions
72
3.1.1 Confirming the Status
The Status page allows you to check the status of the camera. The status 
information provides support for troubleshooting.
Clicking [Status] displays the following page.
Note
See Panasonic Network Camera support website at http://panasonic.co.jp/
pcc/products/en/netwkcam/ for details about status information.
3.1.2 Restarting the Camera
The camera restarts by disconnecting the AC adaptor from the outlet and 
reconnecting it again. The camera can also...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 73
3.1.3 Updating the Camera Firmware
The Update Firmware page allows you to update the camera firmware. If the new 
firmware is available, install it into the camera.
Notes
• Do not turn off the power during firmware update.
• All buffered images will be deleted after the firmware update.
• The firmware version is displayed on the Top page and the Status page.
1.Download the new firmware on the Panasonic...

Operating Instructions
74
• The Update page is displayed in about a minute.
4.Click [Browse...].
• A dialog box is displayed to select the firmware.
5.Select the firmware (including directory information) and click [Open].
• The firmware file name is displayed.
6.Confirm the firmware file name, and click [Update Firmware].
• Clicking [Cancel] takes you back to the Top page without firmware update.
• The next message is displayed during update.
• The camera restarts automatically after update.
• The Top...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 75
7.Confirm that the version number on the Top page is updated.
• If the version number is updated, the firmware update is complete.
Updated version 

Operating Instructions
76
3.1.4 Creating Configuration File
A configuration file can be saved on your PC. You can load the camera settings 
from the configuration file on the Load Settings page (see page 77).
1.Click [Save Settings] on the Maintenance page.
2.Click [Save].
3.Click [Save] on the File Download dialog box.
4.Specify the location, and click [Save] on the Save As dialog box.
• The configuration file is saved in the location.
Notes
• The file extension (.dat) cannot be changed. If you change...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 77
3.1.5 Loading Settings from a Configuration File
The settings can be loaded from a configuration file. If you reset the camera to 
factory default, the camera can load its settings from the configuration file.
Notes
• The configuration file has network settings. When the settings are loaded, 
the network settings are also loaded as they were saved. 
• If there is a firmware version difference between...

Operating Instructions
78
3.1.6 Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is 
clicked.
1.Click [Reset to Factory Default] on the Maintenance page.
2.Click [Execute].
• The indicator blinks orange, and then turns off for 10 seconds.
• All camera settings (user name, password, IP address, subnet mask etc.) 
are reset to factory default.
• If the camera is reset to factory default, the network connection mode 
changes to...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 79
3.2 Support page
3.2.1 Seeing Help page
The Help page displays explanations for each feature about the following 1. to 6. 
items.
Clicking [Help] on the Support page displays the next page.
3.2.2 Seeing Product Information
You can see product information on the Panasonic Network Camera support 
website.
Clicking [Product Information] on the Support page displays the URL, click it.
Note
If the camera is...

Operating Instructions
80
3.2.3 Seeing Support Information
You can see support information on the Panasonic Network Camera support 
website.
Clicking [Support Information] on the Support page displays the URL, click it.
Note
If the camera is not connected to the Internet, the website cannot be displayed.