Panasonic Network Camera Bl C10a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 81
3.3 FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button on the bottom.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory 
default. If you lose your user name and password, use this button to reset the 
camera.
• Press the FACTORY DEFAULT RESET button for 1 second when the camera 
is on.
• The indicator blinks orange, and then turns off for 10 seconds.
• Do...

Operating Instructions
82
3.4 Default Setting List
Basic
Items Default Required Notes
Network Connection Mode Automatic 
Setup- Automatic Setup/
Static/DHCP
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Network Configuration 
from Setup Program 
(Static/DHCP only)Enable - -
Port No. 
(Static/DHCP only)80 - 20, 21, 25 and 110 
is not available.
IP address 
(Static only)192.168.0.
253When 
setting Static*1
Subnet Mask 
(Static only)255.255.
255.0When 
setting Static*1
Host Name 
(DHCP...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 83
Viewnet
cam.comEnable No check - -
Date and 
TimeTime Setting AM/PM - -
Automatic Time 
AdjustmentNo check When using 
NTP-
Time Zone GMT -05:00 - -
Adjust Clock for 
Daylight Saving TimeNo check - -
Sta r t  D ay A pr,
First Sunday,
2 AM--
End Day Oct,
Last Sunday,
2 AM--
Camera Camera Name Network
CameraRequired 1—15 characters
*6
White Balance Auto - Auto/Fixed Indoor/
Fixed Fluorescent...

Operating Instructions
84
Account
Items Default Required Notes
Security: 
AdministratorGeneral 
AuthenticationDo not permit 
access from 
guest users --
User Name [Blank] When setting 
administrator6—15 characters 
*3
Password [Blank] When setting 
administrator6—15 characters 
*3
Retype 
Password[Blank] When setting 
administrator6—15 characters 
*3
General User User ID List [Blank] - -
User Name [Blank] When setting 
general user6—15 characters 
*3
Password [Blank] When setting 
general user6—15...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 85
Advanced
Items Default Required Notes
Image 
DisplaySingle Camera Image 
Resolution320 x 240 - 320 x 240 or 640 
x 480
Single Camera Image 
QualityStandard - Favor Clarity, 
Standard or 
Favor Motion
Single Camera 
Refresh IntervalMotion - 3, 5, 10, 30, 60 
(s) or Motion
Multi-Camera Image 
Resolution320 x 240 - 160 x 120 or 320 
x 240
Multi-Camera Image 
QualityStandard - Favor Clarity, 
Standard or...

Operating Instructions
86
Multi-
CameraMulti-Camera [Blank] - -
Display Checked When setting 
Multi-Camera-
IP Address or Host 
Name[Blank] When setting 
Multi-CameraIP address*1 
Host name*5 is 
1—255 
characters.
Port No. [Blank] When setting 
Multi-Camera20, 21, 25 and 
110 are not 
available.
Camera Name [Blank] When setting 
Multi-Camera1—15 characters
*7
Buffer/
TransferStatus Off - -
Trigger Timer - -
Active Time of Trigger Always - -
Transfer Method No Transfer, 
No Memory 
Overwrite--
Notify - -...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 87
Preset Buttons
Items Default Required Notes
Preset 
ButtonsPreset 1 UpperLeft - -
Preset 2 UpperRight - -
Preset 3 LowerLeft - -
Preset 4 LowerRight - -
*1 Set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available.
*2 Set the number of 1—65535.
*3 Enter ASCII characters for the host name (see page 96). But [Space],...

Operating Instructions
88
3.5 Cleaning
Clean the camera after the camera is turned off.
3.5.1 Cleaning the Main Unit
Clean the unit with a dry and soft cloth.
Notes
• Do not use alcohol, polishing powder, cleanser, benzine, thinner, wax, 
petroleum products or hot water to wipe the camera. Also avoid pesticide, 
glass cleaner or hair spray. They may cause change in the shape or color.
• Do not apply pressure to the pan/tilt portion of the camera. Any forced 
movement can damage the internal mechanism.
•...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 89
3.6 Setting an IP Address on Your PC
Your PC's IP address can be assigned by the following procedures.
1.Display the TCP/IP Properties window.
• The steps are different depending on your OS. The steps are shown 
below.
• When using Windows 2000 and Windows XP, log in as an administrator to 
access the TCP/IP Properties window.
2.Enter IP address and subnet mask.
3.Click [OK].
• In Windows 98SE or...

Operating Instructions
90
3.7 Using Setup Program
The Setup Program can be used for the following purposes.
• Finding the IP address and port number of the camera connected to your 
network.
• Setting up the camera automatically.
• Setting up the camera manually to a Static or a DHCP setting.
• Displaying the Setup page.
Finding the camera
1.
Insert the Setup CD-ROM into the CD-ROM drive of your PC.
• If the Panasonic Network Camera Setup window does not appear, click 
"setup.exe" on the Setup...