Panasonic Network Camera Bb Hcm381a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 71
Pan Range*1Select from the following options.
 Minimum—Current settings, -175—+175
 Home Position*2—Current settings, -175—+175
Maximum—Current settings, -175—+175
The values must be selected as minimumhome 
position
maximum.
Note
If you wrongly set the range, your privacy may be seen. 
Check the range after the setup.
Tilt Range*1Select from the following options.
When the camera is mounted on a...

Operating Instructions
72
3.Click [Save] when finished.
 New settings are saved. If the home position is changed, the camera turns 
to the home position.
 When finished, Success! is displayed.
4.Click [Go to Camera page].
 The Camera page is displayed.
Color Night 
View In the color night view mode, the camera image becomes 
brighter in a low illuminance. The camera image returns 
normal operation in a bright location.
 In color night view mode, the following may be 
experienced:
 Image refresh...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 73
Specifying Pan/Tilt Range
1.Access the camera (see page 13), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 69).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
 Selecting [Current Settings] displays the current angle of the camera. 
Select each value while adjusting the pan/tilt on the Single...

Operating Instructions
74
5.Click [Save] on the Camera page.
 New settings are saved. The camera turns to the home position.
Max.: 0 
Max.: +175 When the camera is
mounted on a table
Min.: -175 
Min.: -120 Max.: +90 
Min.: -175 When the camera is
mounted on a ceiling
Max.: +175 
Min.: 0  

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 75
2.11 Adjusting Audio
The Audio page allows you to adjust the microphone, the use of external speaker, 
microphone sensitivity and external speaker volume.
1.Click [Audio] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
76
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Audio page].
 The Audio page is displayed.
SettingDescription
Output It controls audio output for external speaker connected to 
the camera.
Vo l u m e It controls the volume to output to external speaker.
PC Audio Input 
Timeout  You can set the time to consecutively perceive the audio 
from your PC. (1—60 minutes)
Input It controls audio input from the external...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 77
2.12 Changing Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, 
administrator user name and password. The authentication window is displayed, 
and allows the registered users to access the camera.
Note
 If you access the camera for the first time, the window to set administrator user 
name and password is displayed....

Operating Instructions
78
Note
 When setting [General Authentication], set the user name and password.
 When users other than an administrator are accessing the camera, 
[Setup]  and [Maintenance] tab will not be displayed.
 The user name and password are case sensitive.
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
SettingDescription
General 
AuthenticationAuthentication has 2 phases.
 If you set [Permit access from guest users], the camera 
does not...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 79
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Note
 When the user name and password have been changed, the camera 
displays an authentication window. Enter the user name and password, 
and click [OK].
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered...

Operating Instructions
80
2.13 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] is displayed at the top of the page. After you log in as an administrator, you 
can access the Setup page and the Maintenance page.
1.Click [Login] at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password.
3.Enter a valid user name and password according to the Login mode...