Panasonic Network Camera Bb Hcm381a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 101
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 67).
 Clicking [

Operating Instructions
102
5.Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the alarm position.
 Clicking [].
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 103
7.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, the camera may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer. For the SD 
memory recording, 1 image per second setting is recommended.
 Clicking [

Operating Instructions
104
8.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 105
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
106
*1But [Space], [], [], [&], [] are not available.*2But [] is not available.
SettingDescription
Server IP 
Address or 
Host Name
*1
 If you set the server IP address, set 4 digits (0—255) and 3 
periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Por t  N o. Enter the number (1—65535). Usually set to 21.
Login ID*2 If your ISP requires a login ID, set it (0—63 characters)....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 107
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
108
*1But [Space], [], [], [&], [] are not available.*2But [] is not available.
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
 If you set the server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(1—255 characters).
 You can set IPv6 address.
Por t  N o. Enter the number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you set the server IP...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 109
9.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 107 and page 108. When 
finished, click [Next>] and go to step 10.
10.Click [Save] after confirming the settings.
 New settings are saved.
 When finished, Success! is displayed.
Note
If you...

Operating Instructions
110
11.Click [Go to Image Buffer/Transfer page].
 The Image Buffer/Transfer page is displayed.
Note
 If you set a short interval to transfer image to a cell phone, many E-mails 
may be sent to it leading to a large phone bill. Therefore, we recommend 
you to set a long interval. 1 image per second frequency is recommended.
 Alarm transfer stops its operations until the camera finishes all transfers. 
For example, if the camera transfers 3 images per minute and 6 images in...