Panasonic Network Camera Bb Hcm381a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 91
2.19 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click 
[Next>].
Note...

Operating Instructions
92
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 67).
 Clicking [].
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 93
6.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, the camera may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer.
 Clicking [

Operating Instructions
94
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 95
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
96
*1But [Space], [], [], [&], [] are not available.*2But [] is not available.
SettingDescription
Server IP 
Address or 
Host Name
*1
 If you set the server IP address, set 4 digits (0—255) and 3 
periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Por t  N o. Enter the number (1—65535). Usually set to 21.
Login ID*2 If your ISP requires a login ID, set it (0—63 characters)....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 97
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
98
*1But [Space], [], [], [&], [] are not available.*2But [] is not available.
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
 If you set the server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(1—255 characters).
 You can set IPv6 address.
Por t  N o. Enter the number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you set the server IP...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 99
8.Confirm the settings, and click [Save].
 New settings are saved.
 When finished, Success! is displayed.
9.Click [Go to Image Buffer/Transfer page].
 The Image Buffer/Transfer page is displayed.
Note
 If you click [Save] on the Image Buffer/Transfer page, all buffered images 
on the SD memory card are deleted.
 If you are buffering images on the internal memory, the following 
operations also...

Operating Instructions
100
2.20 Buffering or Transferring Images by Alarm 
Signal
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for trigger, select 
[Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click...