Panasonic Multi Format Live Switcher Av Hs450n Operating Instructions

							171
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
MV MV     1 ParameterSplit PosSignal
MV1 PATT Setting range 16Split, 10Split, 
9Split, 4Split
(The screen can 
be split into a 
total of up to 20 
screens when the 
number of MV1 
split screens and 
number of MV2 
split screens are 
combined.) 1 to 16, 1 to 10, 1 
to 8, 1 to 4
IN1 to 16, 
IN-A1, IN-A2, IN-
B1, IN-B2, CBGD, 
FMEM1 to 4, 
PGM, PVW, 
KeyOut, 
AUX1 to 4
Default value 10Split 1IN1 to 10
MV     2 ParameterFrame CharLabelTally
MV1Frame Setting range LUM 0%, 
LUM25%, 
LUM50%, 
LUM75%, 
LUM100%, Off LUM 0%, 
LUM25%, 
LUM50%, 
LUM75%, 
LUM100%, OffOn, Off
Red, Red+GRN, 
Off
Default value LUM75% LUM75% On Red+GRN
MV     3 ParameterSplit PosSignal
MV2 PATT Setting range 16Split, 
10Split, 
9Split, 
4Split
(The screen can 
be split into a 
total of up to 20 
screens when the 
number of MV1 
split screens and 
number of MV2 
split screens are 
combined.) 1 to 16, 
1 to 10, 
1 to 8, 
1 to 4
IN1 to 16, 
IN-A1, IN-A2, IN-
B1, IN-B2, CBGD, 
FMEM1 to 4, 
PGM, PVW, 
KeyOut, 
AUX1 to 4
Default value 10Split 1IN1 to 10
MV     4 ParameterFrame CharLabelTally
MV2Frame Setting range LUM 0%, 
LUM25%, 
LUM50%, 
LUM75%, 
LUM100%, Off LUM 0%, 
LUM25%, 
LUM50%, 
LUM75%, 
LUM100%, OffOn, Off
Red, Red+GRN, 
Off
Default value LUM75% LUM75% On Red+GRN
8. Setting menu table 
						

							172
MenuSub menu Third menu
Parameter 1 Parameter 2 Parameter 3
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
INPUT INPUT XX* (SDI)
*  IN1 to IN16, A1, A2, B1 or B2 is 
displayed for X. FS
ParameterFS Mode ↓CC
1/13 Setting range On, Off
Normal, DbyD, 
UC, AutoOn, Off
Default value On NormalOff
Freeze ParameterSelect Freeze ↓
2/13 Setting range Frame, Field Toggling between 
On and Off
Default value Frame Off
Name ParameterType ↓ Name
3/13 Setting range
Defalt, Preset, 
User
Default value Defalt
UpConv1 ParameterScale ↓ MovDet ↓Sharp ↓
4/13
(IN13 to IN16, A1, 
A2, B1 or B2 only) Setting range
SQ, EC, LB, 1 to 51 to 5
Default value SQ 33
UpConv2 ParameterEC-Pos
5/13
(IN13 to IN16 
only) Setting range Center, Right, Left
Default value Center
CC ParameterClorCnv Limiter CLEAR ↓
6/13
(IN9 to IN16 only) Setting range On, Off
Off, 108, 104, 100 Prc, Trn, MTX, 
ALL
Default value On 100ALL
CC Prc1 ParameterY-Gain Slice
7/13
(IN9 to IN16 only) Setting range 0.0 to 200.0 –7.0 to 108.0
Default value 100.0
0.0
CC Prc2 ParameterC-Gain Hue
8/13
(IN9 to IN16 only) Setting range 0.0 to 200.0 0.0 to 359.9
Default value 100.0
0.0
CC Trn1 ParameterRGB ManualGrayPos
9/13
(IN9 to IN16 only) Setting range R, G, B
Free, ALL 0.25 to 0.75
Default value R ALL0.50
CC Trn2 ParameterBlackLv GrayLv WhiteLv
10/13
(IN9 to IN16 only) Setting range 0.00 to 0.50 0.25 to 0.75 0.50 to 1.00
Default value 0.00
0.501.00
CC MTX1 ParameterR-G R-B
11/13
(IN9 to IN16 only) Setting r
 ange –1.00 to 1.00 –1.00 to 1.00
Default value 0.00 0.00
CC MTX2 ParameterG-R G-B
12/13
(IN9 to IN16 only) Setting range –1.00 to 1.00 –1.00 to 1.00
Default value 0.00
0.00
CC MTX3 ParameterB-R B-G
13/13
(IN9 to IN16 only) Setting range –1.00 to 1.00 –1.00 to 1.00
Default value 0.00
0.00
8. Setting menu table 
						

							173
MenuSub menu Third menu
Parameter 1 Parameter 2 Parameter 3
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
INPUT INPUT XX* (ANA)
*  A1, A2, B1 or B2 is displayed 
for X. FS
ParameterFS Mode ↓AnaGain
1/4 Setting range On, Off
Normal, DbyD, 
UC, Auto
–30 to +30
Default value On Normal 0
Freeze ParameterSelect Freeze ↓
2/4 Setting range Frame, Field Toggling between 
On and Off
Default value Frame Off
Name ParameterType ↓ Name
3/4 Setting range
Defalt, Preset, 
User
Default value Defalt
UpConv1 ParameterScale ↓ MovDet ↓Sharp ↓
4/4 Setting range
SQ, EC, LB 1 to 51 to 5
Default value SQ 33
INPUT XX*
(DVI)
*  A1, A2, B1 or  B2 is displayed 
for X. Freeze
ParameterSelect Freeze ↓
1/4 Setting range Frame, Field Toggling between 
On and Off
Default value Frame Off
Name ParameterType ↓ Name
2/4 Setting range
Defalt, Preset, 
User
Default value Defalt
DVIIn ParameterMode ScaleAuto ↓
3/4 Setting range
Dig, Ana
(“Ana” can be 
selected when 
the AV-HS04M3 
option board has 
been connected.) Fit-V, Fit-H, Full Black, White, Init
(“Ana” can be 
selected when 
the AV-HS04M3 
option board has 
been connected.)
Default value Dig Fit-VBlack
DVIPhs ParameterClkPhs H-PosV-Pos
4/4 Setting range –16 to 15 –100 to 100 –100 to 100
Default value 0 00
8. Setting menu table 
						

							174
MenuSub menu Third menu
Parameter 1 Parameter 2 Parameter 3
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
INPUT INPUT XX* (Csit)
*  A1, A2, B1 or B2 is displayed 
for X. FS
ParameterFS Mode ↓AnaGain
1/5 Setting range On, Off
Normal, DbyD, 
UC, Auto–30 to +30
Default value On Normal0
Freeze ParameterSelect Freeze ↓
2/5 Setting range Frame, Field Toggling between 
On and Off
Default value Frame Off
Name ParameterType ↓ Name
3/5 Setting range
Defalt, Preset, 
User
Default value Defalt
UpConv1 ParameterScale ↓ MovDet ↓Sharp ↓
4/5 Setting range SQ, EC, LB 1 to 5 1 to 5
Default value SQ 33
Setting ParameterChroma Ped Hue
5/5 Setting range –8 to +7 –100 to +100 30 to +30
(Enabled when the 
system format is 
set to 1080/59.94i, 
720/59.94p and 
480/59.94i.)
Default value 0 00
OUTPUT OUTPUTYY* (SDI)
*  Out1 to 4, A1, A2, B1 or B2 is 
displayed for Y. Asign
ParameterSouce Mode ↓
1/2 Setting range PGM, PVW, CLN, 
AUX1 to 4, MV1 to 
2, KeyOut Normal, DC
Default value  — Normal
DownCnv ParameterScale ↓ Delay ↓Sharp ↓
2/2
(This submenu is 
available when 
the AV-HS04M7 
option board has 
been connected.) Setting range
SQ, EC, LB 90H(75H), 1F1 to 5
Default value SQ 90H3
OUTPUTYY*
(ANA)
*  A1, A2, B1 or  B2 is displayed 
for Y.
(This submenu 
is available when 
the AV-HS04M7 
option board has 
been 
connected.) Asign
ParameterSouce
1/1 Setting range PGM, PVW, CLN, 
AUX1 to 4, MV1 to 
2, KeyOut
Default value  —
8. Setting menu table 
						

							175
MenuSub menu Third menu
Parameter 1 Parameter 2 Parameter 3
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
OUTPUT OUTPUTYY* (DVI-D)
*  Out5 to 6 is displayed for Y. Asign
ParameterSouce MovDet ↓
1/2 Setting range PGM, PVW, CLN, 
AUX1 to 4, MV1 to 
2, KeyOut 1 to 5
Default value  — 3
DVIOut Parameter Size ↓Scale ↓
2/2 Setting range
Auto, XGA, 
WXGA, SXGA, 
WSXGA+, UXGA, 
WUXGAFit-V, Fit-H, Full
Default value AutoFit-V
OUTPUTYY*
(DVI-I)
*  A1, A2, B1 or  B2 is displayed 
for Y.
(This submenu 
is available when 
the AV-HS04M5 
option board has 
been 
connected.) Asign
ParameterSouce
1/2 Setting range PGM, PVW, CLN, 
AUX1 to 4, MV1 to 
2, KeyOut
Default value  —
DVIOut ParameterMode ↓ Size ↓Scale ↓
2/2 Setting range
Dig, Ana Auto, XGA, 
WXGA, SXGA, 
WSXGA+, UXGA, 
WUXGAFit-V, Fit-H, Full
Default value Dig AutoFit-V
8. Setting menu table 
						

							176
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
CONFIG CONFIG 1 ParameterBusMode LCD-BL MENUDLG
Operate Setting range A/B, 
PGM/PST On, Off, 60, 120, 
180On, Off
Default value PGM/PST On On
CONFIG 2 ParameterLEDMode
SHOT MEM Setting range AW, AV
Default value AV
CONFIG 3 ParameterENBL
SYSCONF Setting range Enable, Disable
(When Disable 
is selected, the 
system menu is 
locked.)
Default value Disable
CONFIG 4 ParameterPort Assign GPIEN
GPIM-In Setting range Port1 to 8 AUTO, CUT, 
DSK1, DSK2, 
PinP1, PinP2, 
FTB, BGDAUTO, 
BGDCUT, 
KEYAUTO, 
KEYCUT, 
RTlyDBL, 
GTlyDBL, 
NoAsign Enable, Disable
Default value  — NoAsign Enable
CONFIG 5 ParameterPort Assign GPIEN
GPIM-Out Setting range Port1 to 31 AUTO, CUT, 
DSK1ON, 
DSK2ON, 
PinP1ON, 
PinP2ON, 
FTBON, 
BGDAUTO, 
BGDCUT, 
KEYAUTO, 
KEYCUT, 
DSK1TRN, 
DSK2TRN, 
PinP1TR, 
PinP2TR, 
FTBTRN, KEYON, 
KEYTRN, 
R-Tly1 to 20, 
G-Tly1 to 20, 
NoAsign Enable, Disable
Default value  — NoAsign Disable
8. Setting menu table 
						

							177
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
CONFIG CONFIG 6 ParameterPort Assign GPIEN
GPIP-In Setting range Port1 to 8 AUTO, CUT, 
DSK1, DSK2, 
PinP1, PinP2, 
FTB, BGDAUTO, 
BGDCUT, 
KEYAUTO, 
KEYCUT, 
RTlyDBL, 
GTlyDBL, 
NoAsign Enable, Disable
Default value  — NoAsign Disable
CONFIG 7 ParameterPort Assign GPIEN
GPIP-Out Setting range Port1 to 8 AUTO, CUT, 
DSK1ON, 
DSK2ON, 
PinP1ON, 
PinP2ON, 
FTBON, 
BGDAUTO, 
BGDCUT, 
KEYAUTO, 
KEYCUT, 
DSK1TRN, 
DSK2TRN, 
PinP1TR, 
PinP2TR, 
FTBTRN, KEYON, 
KEYTRN, 
R-Tly1 to 20, 
G-Tly1 to 20, 
NoAsign Enable, Disable
Default value  — NoAsign Disable
8. Setting menu table 
						

							178
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
CONFIG CONFIG 8 ParameterUSER1 USER2USER3
Button1 Setting range PinPPVW, 
DSK1PVW, 
DSK2PVW, 
Edit-EN, COM-EN, 
GPIMIEN, 
GPIMOEN, 
GPIPIEN, 
GPIPOEN, 
OSD, StrFM1, 
StrFM2, StrFM3, 
StrFM4, SHIFT, 
AUX TRAN, None PinPPVW, 
DSK1PVW, 
DSK2PVW, 
Edit-EN, COM-EN, 
GPIMIEN, 
GPIMOEN, 
GPIPIEN, 
GPIPOEN, 
OSD, StrFM1, 
StrFM2, StrFM3, 
StrFM4, SHIFT, 
AUX TRAN, NonePinPPVW, 
DSK1PVW, 
DSK2PVW, 
Edit-EN, COM-EN, 
GPIMIEN, 
GPIMOEN, 
GPIPIEN, 
GPIPOEN, 
OSD, StrFM1, 
StrFM2, StrFM3, 
StrFM4, SHIFT, 
AUX TRAN, None
Default value PinPPVW DSK1PVW OSD
CONFIG 9 ParameterUSER4 USER5USER6
Button2 Setting range PinPPVW, 
DSK1PVW, 
DSK2PVW, 
Edit-EN, COM-EN, 
GPIMIEN, 
GPIMOEN, 
GPIPIEN, 
GPIPOEN, 
OSD, StrFM1, 
StrFM2, StrFM3, 
StrFM4, SHIFT, 
AUX TRAN, None PinPPVW, 
DSK1PVW, 
DSK2PVW, 
Edit-EN, COM-EN, 
GPIMIEN, 
GPIMOEN, 
GPIPIEN, 
GPIPOEN, 
OSD, StrFM1, 
StrFM2, StrFM3, 
StrFM4, SHIFT, 
AUX TRAN, NonePinPPVW, 
DSK1PVW, 
DSK2PVW, 
Edit-EN, COM-EN, 
GPIMIEN, 
GPIMOEN, 
GPIPIEN, 
GPIPOEN, 
OSD, StrFM1, 
StrFM2, StrFM3, 
StrFM4, SHIFT, 
AUX TRAN, None
Default value Edit-EN StrFM1SHIFT
CONFIG10 ParameterOSD Select
OSD Setting range On, Off PVW, MV1, MV2, 
MV1+MV2
Default value On PVW
CONFIG11 ParameterFill Source ↓
KSAsign Setting range IN1 to 16, IN-A1, 
IN-A2, IN-B1, 
IN-B2, CBGD, 
CBAR, FMEM1 
to 4 IN1 to 16, IN-A1, 
IN-A2, IN-B1, 
IN-B2, CBGD, 
CBAR, FMEM1 to 
4, NoAsign
Default value  — (Same as Fill)
CONFIG12 ParameterCLN
CLNAsign Setting range KEY, DSK1, DSK2
Default value KEY
8. Setting menu table 
						

							179
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
SYSTEM
(When 
locked) (Message)
Parameter The SYSTEM menu is locked.
Display only
SYSTEM
(When 
unlocked) SYS    1
ParameterMode ↓ HiRes ↓16:9SQ
Format Setting range
1080/59.94i, 1080/50i, 1080/24psf, 
1080/23.98psf, 720/59.94p, 720/50p, 
480/59.94i, 576/50i On, Off
(Selection enabled 
when SD format is 
used)On, Off
(Selection enabled 
when SD format is 
used)
Default value 1080/59.94i OffOff
SYS     2 ParameterSystem H-Phase V-Phase
OutPhs Setting range 0H, 1H –1320 to +1319 –100 to +100
Default value 1H 00
SYS    3 ParameterSync ↓ BBSetup GenLock
Ref Setting range
BBST, BBAD, 
TRI, INT 0IRE, 7.5IRE Locked, UnLock
Default value BBST 7.5IRE —
SYS    4 ParameterVAnci E.Audio
Anci Setting range On, Off On, Off
Default value Off Off
SYS    5 ParameterPower Fan
Alarm Setting range Alarm, NoAlarm Alarm, NoAlarm
Default value Alarm Alarm
SYS    6 ParameterInit ↓ F Init ↓
Initial Setting range
Default value
SYS    7 ParameterIP Address  Save ↓
NetWork1 Setting range 0 to 255 0 to 2550 to 2550 to 255
Default value 192 168010
SYS    8 ParameterSubnet Mask  Save ↓
NetWork2 Setting range 0 to 255 0 to 2550 to 2550 to 255
Default value 255 2552550
SYS    9 ParameterMAC Address
NetWork3 Display only
SYS   10 ParameterYear MonthDateSet ↓
Date Setting range 2000 to 2099 1 to 12 1 to 31 —
Default value  —  — — —
SYS   11 ParameterHour MinuteSecondSet ↓
Time Setting range 0 to 23 0 to 590 to 59 —
Default value  —  — — —
8. Setting menu table 
						

							180
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
SYSTEM
(When 
unlocked) SYS   12
ParameterSelect Version SysVer
MainVer Setting range MFSoft, PnlSoft, 
PnlFPGA, 
CntFPGA, 
In1FPGA, 
In2FPGA, 
M/EFPGA, 
OutFPGA Version number
Version number
Default value MFSoft
SYS   13 ParameterSelect BoardVersion
OptVer Setting range SLOTA, SLOTB SDI-IN, Ana-IN, 
DVI-IN, DVID-IN, 
SDI-OUT, 
Ana-OUT, 
D/A-OUT, 
Csit-IN, NoneVersion number
Default value SLOTA
8. Setting menu table