Panasonic Multi Format Live Switcher Av Hs450n Operating Instructions

							101
4. Input/output signal settings
Process control 
 Adjusting the Y signal gain and setting its slice level
 On the INPUT XX sub menu, turn [F2] to display the third menu of CC Prc1.
 
INPUT XX |
CC Prc1 |
Y-Gain  |
Slice   |
       
        |  7/13 |  100.0|    0.0|    
    0.0
     |
  200.0   −7.0
     |
  108.0
 Turn [F3] to set the gain value of the Y signal using the Y-Gain item.
 Turn [F4] to set the slice level using the Slice item.
 
 Adjusting the gain and hue of the C signal
 On the INPUT XX sub menu, turn [F2] to display the third menu of CC Prc2.
 
INPUT XX |
CC Prc2 |
C-Gain  |
Hue     |
       
        |  8/13 |  100.0|    0.0|    
    0.0
     |
  200.0    0.0
     |
  359.9
 Turn [F3] to set the gain value of the C signal using the C-Gain item.
 Turn [F4] to set the hue value using the Hue item. 
						

							102
4. Input/output signal settings
Tone curve
GrayPos
GrayLvWhiteLv
BlackLv
Input level
Output level
The gray scale of the input images can be compensated.
Set the tone curve, and adjust the image brightness, contrast 
and other characteristics.
Furthermore, by adjusting each of the R, G and B colors 
separately, the white balance and color tone can be adjusted. On the INPUT XX sub menu, turn [F2] to display the 
third menu of CC Trn1.
 
INPUT XX |
CC Trn1 |
RGB     |
Manual  |
GrayPos
        |  9/13 |      R|    ALL|   0.50
      G
      B   Free   0.25
     |
   0.75
 Turn [F3] to select the color to be compensated using the RGB item.
R: red, G: green, B: blue
 Turn [F4] to set the compensation mode using the Manual item.
ALL:   The R, G and B colors are all set to the same value.
When the mode has been set to ALL, the colors set using the RGB item are\
 canceled.
Free:  Each of the R, G and B colors is set separately.
 Turn [F5] to set the gray level position using the GrayPos item.
 Turn [F2] to display the third menu of CC Trn2.
 
INPUT XX |
CC Trn2 |
BlackLv |
GrayLv  |
WhiteLv
        | 10/13 |   0.00|   0.50|   1.00
   0.00
     |
   0.50   0.25
     |
   0.75   0.50
     |
   1.00
 Turn [F3] to set the black level using the BlackLv item.
 Turn [F4] to set the gray level using the GrayLv item.
 Turn [F5] to set the white level using the WhiteLv item. 
						

							103
4. Input/output signal settings
Adjusting the color matrix item gain On the INPUT XX sub menu, turn [F2] to display the third menu of CC MTX1.
 
INPUT XX |
CC MTX1 |
R-G     |
R-B     |
       
        | 11/13 |   0.00|   0.00|    
  −1.00
     |
   1.00  −1.00
     |
   1.00
 Turn [F3] to set the matrix item R-G gain value using the R-G item.
 Turn [F4] to set the matrix item R-B gain value using the R-B item.
 In the same way, set the matrix item G-R and G-B gain values using the third menu of CC MTX2, and set 
the matrix item B-R and B-G gain values using the third menu of CC MTX3. 
						

							104
4. Input/output signal settings
4-1-5.  Setting the up-converter
Select the settings for INPUT13 to 16, as well as for the up-converter that is built into the optional boards listed 
below: 
 AV-HS04M1 (SDI Input Board)
 
 AV-HS04M2 (Analog Input Board)
 
 AV-HS04M6 (Analog Composite Input Board)
 Press the [INPUT] button to light its indicator and display the INPUT menu.
 Refer to “2-1-5. LCD menu area”.
 
INPUT XX |
UpConv1 |
Scale   |
MovDet↓ |
Sharp↓ 
        |  4/13 |    
SQ|     3|     3
     EC
     LB    1~5    1~5
 Turn [F1] to display the INPUT XX sub menu.
(X: IN1 to IN16, A1, A2, B1 or B2)
The input used to set the up-converter is selected for X.
 Turn [F2] to display the third menu of UpConv1.
 Turn [F3] to select the scaling system using the Scale item, and press the \
[F3] switch to enter the selection.
SQ (squeeze):  The image is enlarged both horizontally and vertically to fill the entire screen.
EC (edge crop):   The aspect ratio of the image is maintained, the image size is increased in accordance 
with the vertical resolution, and black bands are added at the left and right.
LB (letter box):   The aspect ratio of the image is maintained, the image size is increased in accordance 
with the horizontal resolution, and the image is cropped at the top and bottom.
Input image SQECLB

 Turn [F4] to set the image movement detection sensitivity using the MovDet item, and press the [F4] switch 
to enter the selection.
1: Toward still images  3: standard  5: toward moving images
 Turn [F5] to set the extent of the edge sharpness for the images using the Sharp item, and press the [F5] 
switch to enter the selection.
1: Not sharp edges  3: standard  5: very sharp edges 
						

							105
4. Input/output signal settings
Fine-tuning of image positions
Fine-tuning of image positions is performed when EC (edge crop) is selected for the scaling method. On the INPUT XX sub menu, turn [F2] to display the third menu of UpConv2.
 
INPUT XX |
UpConv2 |
EC-Pos  |
        |
       
        |  5/13 | Center|       |       
  Right
   Left
 Turn [F3] to select the image position using the EC-Pos item.
Center: The image is positioned at the center, and black images are added at the left and right.
Right:  The image is positioned at the right, and a black image is added at the left.
Left:  The image is positioned at the left, and a black image is added at the right.
4-1-6.   Setting the analog input gain (option)
When the analog input board (option) has been connected, the gain of t\
he input signals can be set. 
Alternatively, when the analog composite input board (option) has been connected, t\
he gain of the Y signals can 
be set.
The setting range is ±30 steps, and the gain changes by approximately ±2 dB. The amount of change in the gain 
when it is changed by one step is not fixed.
Press the [INPUT] button to light its indicator and display the INPUT menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the INPUT XX sub menu.
(X: A1, A2, B1 or B2)
The input used to set the gain is selected for X.
 Turn [F2] to display the third menu of FS.
 
INPUT XX |
FS      |
FS      |
Mode↓   |
AnaGain
        |  1/6  |     On|
Normal|      0
    −30
     |
    +30
 Turn [F5] to set the gain of the input signal (Y signal gain) using the A\
naGain item. 
						

							106
4. Input/output signal settings
4-1-7.  Setting the analog composite input signals (option)
When the analog composite input board (option) has been connected, the\
 analog composite input signals can be 
set.
Press the [INPUT] button to light its indicator and display the INPUT menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the INPUT XX sub menu.
(X: A1, A2, B1 or B2)
The input used to set the analog composite signal is selected for X.
 Turn [F2] to display the third menu of Setting.
 
INPUT XX |
Setting |
Chroma  |
Ped     |
Hue    
        |  3/5  |      0|      0|      0
−8~+7   −100
     |
   +100−30~+30
 Turn [F3] to adjust the chroma level using the Chroma item. 
(Maximum amount of variation: approx. ±3 dB)
The Auto Color Control function is activated, and the chroma level is kept at the value that has been set.
 Turn [F4] to adjust the pedestal level using the Ped item. 
(Maximum amount of variation: approx. ±100 mV)
 Turn [F5] to adjust the hue using the Hue item. 
(Maximum amount of variation: approx. ±20°)
Adjustment of Hue is possible when the system format is 1080/59.94i, 720/59.94p and 480/59.94i.
For details on the other settings, refer to the operating instructions of the optional board. 
						

							107
4. Input/output signal settings
4-2.  Setting the DVI input signals (option)
4-2-1.   Setting the DVI input signals
Set the DVI input signals when the DVI input board (option) or full HD DVI input board (option) has been 
connected.
Signals with the following resolutions can be input.
If signals with any other resolution or frequency are input, the picture will turn black.
DVI Input Board (Digital/Analog)
 XGA  (1024768), 60 Hz
 WXGA  (1280768), 60 Hz
 SXGA  (12841024), 60 Hz
Full-HD DVI Input Board (Digital)
 XGA  (1024768), 60 Hz
 WXGA  (1280768), 60 Hz
 SXGA  (12841024), 60 Hz
 WSXGA+  (16801050), 60 Hz
 UXGA  (16001200), 60 Hz
 WUXGA  (19201200), 60 Hz
 1080/59.94P (19201080), 59.94 Hz
 1080/50P  (19201080), 50 Hz
 Press the [INPUT] button to light its indicator and display the INPUT menu.
 Refer to “2-1-5. LCD menu area”.
 Turn [F1] to display the INPUT XX sub menu.
(X: A1, A2, B1 or B2)
The input used to set the DVI signals is selected for X.
 Turn [F2] to display the third menu of DVIIn.
 
INPUT XX |
DVIIn   |
Mode    |
Scale   |
Auto↓  
        |  3/4  |    Dig|  Fit-V|  Black
    Ana  Fit-H
   Full  White
   Init
 Turn [F3] to select the signal system using the Mode item.
 Set this when the DVI input board (AV-HS04M3) has been connected.
Dig:  Digital input signals of the DVI connector are effective.
Ana:  Analog input signals of the DVI connector are effective. 
						

							108
4. Input/output signal settings
Turn [F4] to select the scaling method.
Fit-V:   The aspect ratio of the input images is maintained, and the size of the images is increased or 
reduced in accordance with the vertical resolution.
Fit-H:   The aspect ratio of the input images is maintained, and the size of the images is increased or 
reduced in accordance with the horizontal resolution.
Full:   The size of the input images is increased or reduced in accordance with the sys\
tem resolution. 
(The aspect ratio of the input images is not kept the same. The rate at which the image size is 
increased or reduced in the vertical direction and in the horizontal direction differs.)
   For details on the sizes that correspond to the formats, refer to “DVI input scaling size table” on the next 
page.
 The black level (offset) and white level (gain) of the analog input signals are adjusted automatically.
 Set this when the DVI input board (AV-HS04M3) has been connected.
   Depending on the personal computer used, there may be some deviation from the correct levels of the black 
level or white level.
   To proceed with automatic adjustment to correct this deviation, display the black-and-white signals 
(BW.bmp) on the supplied CD-ROM or the full-screen black signals and full-screen white signals on the 
personal computer connected to the DVI input connector, and input these signals as the DVI input signals.
   When using the black-and-white signals, position them so that the boundary between black and white comes 
to the center of the monitor screen.
   When using the full-screen black signals or full-screen white signals, display the black or white in an area 
that covers at least 80 % of the screen from the screen center.
   Before making any adjustments, follow the instructions given in the “Automatic adjustment of the black level” 
section.
  Automatic adjustment of the black level
     Input the black-and-white signals (BW.bmp) or full-screen black signals.
     Turn [F5] to select “Black” in the Auto item, and press [F5] to adjust the black level automatically.
     “… During Auto Setting …” is displayed on the LCD while adjustments are being made.
  Automatic adjustment of the white level
     Input the black-and-white signals (BW.bmp) or full-screen white signals.
     Turn [F5] to select “White” in the Auto item, and press [F5] to adjust the white level automatically.
     “… During Auto Setting …” is displayed on the LCD while adjustments are being made.
  Initializing the adjusted values
     Turn [F5] to select “Init” in the Auto item, and press [F5] to return the adjusted values to their factory 
settings.
     “… During Auto Setting …” is displayed on the LCD while adjustments are being made. 
						

							109
4. Input/output signal settings
 
  DVI input scaling size table
DVI format Mode HD/1080i HD/720P SD/NTSC SD/PAL
1920  1080 1280  720 720  480 720  576
XGA
1024768
Fit-V


480 720 576720 
Fit-H
480 720 576720 
Full


480 720 576720 
SXGA
12801024Fit-V


480 675 576675 
Fit-H
Full


480 720 576720 
WXGA
1280768Fit-V
Fit-H
Full
: Black images are inserted here.: The parts of the images protruding in these areas are cropped. 
						

							110
4. Input/output signal settings
DVI format ModeHD/1080i HD/720P SD/NTSC SD/PAL
1920  1080 1280  720 720  480 720  576
WSXGA+
16801050
Fit-V1728
1080720
1152
Fit-H
Full1920
1080720
1280
480 720576720
UXGA
16001200Fit-V1440
1080720
960
480 720576720
Fit-H
480 720576720
Full1920
1080720
1280
480 720576720
WUXGA
19201200Fit-V1728
1080720
1152
Fit-H
Full1920
1080720
1280
480 720576720
: Black images are inserted here.
: The parts of the images protruding in these areas are cropped.