Panasonic Multi Format Live Switcher Av Hs450n Operating Instructions

							161
7. Image transmission functions

1.  Select the mode.Check that “To HS450” appears in the [Mode] field.
If “From HS450” appears instead, click the [From HS450] button so that “To HS450” appears.
2.  Select the transmission destination of the images in the [Target] field. FMEM1:  Unit’s frame memory 1
FMEM2:  Unit’s frame memory 2
FMEM3:  Unit’s frame memory 3
FMEM4:  Unit’s frame memory 4
3.  When the [Select Image] button is clicked, the file selection dialog box appears on the screen.  Select the image file to be transmitted, and click [OK]. 
The image is now displayed in the image display area, and its horizontal and vertical dimensions appear in 
the [Width] and [Height] fields at the bottom right.
4.  In the [Size] field, select the size of the image to be transmitted to the unit.  HD1080 (19201080), HD720 (1280720), SD480 (720487) or SD576 (720576) can be selected as 
the size. If the image is in a different video format from the ones supported by the unit, the output will not 
be displayed properly.
5.  In the [Aspect] field, select the scaling method.  If the size of the image to be transmitted and the selected image differ, the image will be automatically 
scaled according to one of the following methods.
Full:   The size of the image is increased or reduced so that it fits the size selected in the [Size] field. If 
the aspect ratio of the image to be transmitted differs from that of the selected image, the ratio 
between the horizontal and vertical dimensions will be changed.
Keep:   The image is expanded or reduced while its original aspect ratio is kept unchanged. 
Any empty spaces in the image will appear black.
6.  The [RGBA(1&2or3&4)] button can be selected when images containing the alpha channel are to be\
  transmitted.
Click the [RGBA(1&2or3&4)] button and select “FMEM1” in the [Target] field to transmit the RGB images to 
frame memory 1 (FMEM1) and the alpha channel images to frame memory 2 (FMEM2). 
Selecting “FMEM3” in the [Target] field to transmit the RGB images to frame memory 3 (FMEM3) and the 
alpha channel images to frame memory 4 (FMEM4).
When the [Display Alpha] button is clicked, the alpha channel images appear as a preview display.
7.  When the [Send] button is clicked, images are transmitted to the unit and images are saved in frame  memory and flash memory. 
 The [Wright Flash] button is always in the selected status.
When not saving images in the flash memory, click the [Wright Flash] button to deselect the [Wright 
Flash] button. 
						

							162
7. Image transmission functions

1.  Select the mode.Check that “From HS450” appears in the [Mode] field.
If “To HS450” appears instead, click the [To HS450] button so that “From HS450” appears.
2.  Select the images to be imported to the host computer in the [Target] field.
FMEM1:  Images in unit’s frame memory 1
FMEM2:  Images in unit’s frame memory 2
FMEM3:  Images in unit’s frame memory 3
FMEM4:  Images in unit’s frame memory 4
3.  When the [Get] button is clicked, the image is imported from the unit.  The image is now displayed in the image display area, and its horizontal and vertical dimensions appear in 
the Width and Height fields at the bottom right.
4.  When the [Save Image] button is clicked, the file save dialog box appears on the screen. Select the image  file to be transmitted, and click [Save]. 
						

							163
8.  Setting menu table
A setting is entered when an item displayed ( ↓) is selected and then the [F1], [F2], [F3], [F4] or [F5] switch is 
pressed.
(It will not be entered unless the switch is pressed.)
Menu Sub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
KEY KEY    1 ParameterType LumKey Fill PVW
KEY Setting range Lum, Linear, 
Chroma, Full ChrmOn, ChrmOff Bus, Matte Auto, Off, On
Default value Linear ChrmOff Bus Auto
KEY    2 ParameterClip GainDensityInvert
Adjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, Off
Default value 0.0 100.0100.0Off
KEY    3 ParameterHue SatLumLoad ↓
FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0
White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.0100.0White
KEY    4 ParameterType WidthDirec
Edge Setting range Off, Border, Drop, 
Shadow, Outline 0 to 4
0, 45, 90, 135, 180, 
225, 270, 315
Default value Off
20
KEY    5 ParameterHue SatLumLoad ↓
EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0
White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.00.0Black
KEY    6 ParameterX-Pos Y-Pos CopyTo ↓
WIPEPos Setting range 100.00 to 100.00 100.00 to 100.00 Displays the copy 
destination.
Default value 0.00 0.00
KEY    7 ParameterX-Pos Y-Pos CopyTo ↓
SQPos Setting range 100.00 to 100.00 100.00 to 100.00 Displays the copy 
destination.
Default value 0.00 0.00
KEY    8 ParameterX-Pos Y-PosSize
FlyKEY Setting range 100.00 to 100.00 100.00 to 100.00 0.0 to 400.0
Default value 0.00 0.00100.0
KEY    9 ParameterLight
Modify Setting range On, Off
Default value Off
KEY   10 ParameterMask Invert
Mask Setting range Off, Manual, 4:3 On, Off
Default value Off Off
KEY KEY   11 ParameterLeft TopBottomRight
MaskAdj Setting range 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00
Default value –25.00 25.00–25.0025.00
KEY   12 ParameterOutPatt
Trans Setting range Nor, Rev
Default value Nor 
						

							164
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
CHR KEY CHRKEY 1 ParameterAutCmp ↓ RESET ↓
AutoCmp Setting range
Default value
CHRKEY 2 ParameterView Mode UNDO ↓
Sample1 Setting range Cmpsit, Matte, 
Proc.FG, FG SelBG, Cln.BG, 
Cln.FG, Spl.Spg
Default value Cmpsit SelBG
CHRKEY 3 ParameterView Mode UNDO ↓
Sample2 Setting range Cmpsit, Matte, 
Proc.FG, FG Spill–, Spill+, 
Matte–, Matte+, 
Detail–, Detail+, 
MatSpng, 
MkFGTrn, RstrDtl
Default value Cmpsit Spill–
CHRKEY 4 ParameterView SpillTransDetail
FineTun Setting range Cmpsit, Matte, 
Proc.FG, FG –1000 to 1000 –1000 to 1000 –1000 to 1000
Default value Cmpsit 000
PinP1 PinP1  1 ParameterShape CrclAsp Density PVW
PinP1 Setting range Square, Circle 0.0 to 100.0 0.0 to 100.0 On, Off
Default value Square 0.0100.0Off
PinP1  2 ParameterBorder WidthSoftMode
Border Setting range Off, On 0.1 to 100.0 0.0 to 100.0 Fix, Var
Default value Off 5.00.0Fix
PinP1  3 ParameterHue SatLumLoad ↓
BodrCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.0100.0White
PinP1  4 ParameterX-Pos Y-PosSize
Position Setting range 50.00 to 50.00 50.00 to 50.00 0.00 to 100.00
Default value 0.00 0.0025.00
PinP1  5 ParameterXYZ
Rotation Setting range –360 to 360 –360 to 360 –360 to 360
Default value 0 00
8. Setting menu table 
						

							165
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
PinP1 PinP1  6 ParameterTrim Manual
Trim Setting range Manual, Off, 4:3
(The setting is 
 xed at Off when 
Circle has been 
set for the Shape 
item on the PinP1 
sub menu.) Free, Pair
Default value Off Free
PinP1  7 ParameterLeft TopBottomRight
TrimAdj Setting range 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00
Default value –40.00 40.00–40.0040.00
PinP1  8 ParameterPrior Synm
Sync Setting range 1over2, 2over1 Off, X, Y, Center
Default value 1over2 Off
PinP2 PinP2  1 ParameterShape DensityPVW
PinP2 Setting range Square 0.0 to 100.0 On, Off
Default value Square ( xed) 100.0Off
PinP2  2 ParameterBorder WidthSoftMode
Border Setting range Off, On 0.1 to 100.0 0.0 to 100.0 Fix, Var
Default value Off 5.00.0Fix
PinP2  3 ParameterHue SatLumLoad ↓
BodrCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.0100.0White
PinP2  4 ParameterX-Pos Y-PosSize
Position Setting range 50.00 to 50.00 50.00 to 50.00 0.00 to 100.00
Default value 0.00 0.0025.00
PinP2  5 ParameterXYZ
Rotation Setting range –360 to 360 –360 to 360 –360 to 360
Default value 0 00
PinP2  6 ParameterTrim Manual
Trim Setting range Manual, Off, 4:3 Free, Pair
Default value Off Free
PinP2  7 ParameterLeft TopBottomRight
TrimAdj Setting range 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00
Default value –40.00 40.00–40.0040.00
PinP2  8 ParameterPrior Synm
Sync Setting range 1over2, 2over1 Off, X, Y, Center
Default value 1over2 Off
8. Setting menu table 
						

							166
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
DSK1 DSK1   1 ParameterType LumKey Fill PVW
DSK1 Setting range Lum, Linear ChrmOn, ChrmOff Bus, Matte On, Off
Default value Linear ChrmOff Bus Off
DSK1   2 ParameterClip GainDensityInvert
Adjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, Off
Default value 0.0 100.0100.0Off
DSK1   3 ParameterHue SatLumLoad ↓
FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.0100.0White
DSK1   4 ParameterType WidthDirec
Edge Setting range Off, Border, Drop, 
Shadow, Outline 0 to 4
0, 45, 90, 135, 
180, 225, 270, 315
Default value Off 20
DSK1   5 ParameterHue SatLumLoad ↓
EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.00.0Black
DSK1   6 ParameterMask Invert
Mask Setting range Off, Manual, 4:3 On, Off
Default value Off Off
DSK1   7 ParameterLeft TopBottomRight
MaskAdj Setting range 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00
Default value –25.00 25.00–25.0025.00
DSK2 DSK2   1 ParameterType LumKey Fill PVW
DSK2 Setting range Lum, Linear ChrmOn, ChrmOff Bus, Matte On, Off
Default value Linear ChrmOff Bus Off
DSK2   2 ParameterClip GainDensityInvert
Adjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, Off
Default value 0.0 100.0100.0Off
DSK2   3 ParameterHue SatLumLoad ↓
FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.0100.0White
8. Setting menu table 
						

							167
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
DSK2 DSK2   4 ParameterType WidthDirec
Edge Setting range Off, Border, Drop, 
Shadow, Outline 0 to 4 0, 45, 90, 135, 
180, 225, 270, 315
Default value Off 2 0
DSK2   5 ParameterHue SatLumLoad ↓
EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.00.0Black
DSK2   6 ParameterMask Invert
Mask Setting range Off, Manual, 4:3 On, Off
Default value Off Off
DSK2   7 ParameterLeft TopBottomRight
MaskAdj Setting range 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00 50.00 to 50.00
Default value –25.00 25.00–25.0025.00
TIME TIME   1 ParameterTransTime Unit
BKGD Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
TIME   2 ParameterTransTime Unit
KEY Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
TIME   3 ParameterTransTime Unit
PinP1 Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
TIME   4 ParameterTransTime Unit
PinP2 Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
TIME   5 ParameterTransTime Unit
DSK1 Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
TIME   6 ParameterTransTime Unit
DSK2 Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
TIME   7 ParameterTransTime UnitENBL
AUX1 Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec Enable, Disable
Default value 1s 0fSecEnable
8. Setting menu table 
						

							168
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
TIME TIME   8 ParameterTransTime Unit
EFF DSLV Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
TIME   9 ParameterTransTime Unit
FTB Setting range 0 to 33s
(When 59.94 Hz is 
selected) 0 to 999f Frame, Sec
Default value 1s 0fSec
CBGD CBGD   1 ParameterHue SatLumLoad ↓
CBGD Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.0100.0White
BKGD BKGD   1 ParameterBorder WidthSoft
Border Setting range On, Off 0.1 to 100.0 0.0 to 100.0
  “-” is displayed 
when the SQ2, 
SL2 or 3D2 
wipe pattern for 
the background 
transition has 
been selected 
using the [BKGD 
PATT] button.
Default value Off 5.00.0
BKGD   2 ParameterHue SatLumLoad ↓
BodrCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow, 
Cyan, Green, 
Magenta, Red, 
Blue, Black
Default value 0.0 0.0100.0White
BKGD   3 ParameterX-Pos Y-Pos CopyTo ↓
WIPEPos Setting range 100.00 to 100.00 100.00 to 100.00 Display only
Default value 0.00 0.00
BKGD   4 ParameterX-Pos Y-Pos CopyTo ↓
SQPos Setting range 100.00 to 100.00 100.00 to 100.00 Display only
Default value 0.00 0.00
BKGD   5 ParameterLight Trim4:3Auto
Modify Setting range On, Off Off, 16:9 (On), 4:3, 
4:3Smth On, Off
(Selection enabled 
when HD format is 
used)
Default value Off OffOff
BKGD   6 ParameterType
Base Setting range FMEM1 to 4, 
Black, CBGD
Default value Black
8. Setting menu table 
						

							169
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
IMAG A IMG A  1 ParameterOn/Off
IMAG A Setting range On, Off
Default value Off
IMG A  2 ParameterOn/Off Y-LevelC-Level
Paint Setting range On, Off 0 to 70 to 7
Default value Off 00
IMG A  3 ParameterOn/Off HueSat
Mono Setting range On, Off 0.0 to 359.9 0.0 to 100.0
Default value Off 0.00.0
IMG A  4 ParameterOn/Off ModeEffect
Mosa/Def Setting range On, Off Mosaic, Defocus 0.0 to 100.0
Default value Off Mosaic20.0
IMAG B IMG B  1 ParameterOn/Off
IMAG B Setting range On, Off
Default value Off
IMG B  2 ParameterOn/Off Y-LevelC-Level
Paint Setting range On, Off 0 to 70 to 7
Default value Off 00
IMG B  3 ParameterOn/Off HueSat
Mono Setting range On, Off 0.0 to 359.9 0.0 to 100.0
Default value Off 0.00.0
IMG B  4 ParameterOn/Off ModeEffect
Mosa/Def Setting range On, Off Mosaic, Defocus 0.0 to 100.0
Default value Off Mosaic20.0
FMEM FMEM   1 ParameterFMEM SelectReviewExec ↓
AUX Setting range FMEM1 to 4 AUX1 to 4 On, Off
Default value FMEM1 AUX1Off
FMEM   2 ParameterMode Select Exec ↓
Memory Setting range AUTO, Manual FMEM1 to 4, ALL
Default value AUTO ALL
SDCard SDCard 1 ParameterMode ↓ SelectSaveFile Exec ↓
File Setting range
Load, Save, Init, 
Delete, No Card FMEM1 to 4, 
SetUp
HS001
Default value  —  — —
SDCard 2 ParameterImages FreeSpace GetInf ↓
CardInfo Setting range    MB/   MB
Default value
CTL CTL    1 ParameterEdit-EN COM-EN
RS422 Setting range Enable, Disable Enable, Disable
Default value Enable Enable
8. Setting menu table 
						

							170
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
CAM CAM    1 ParameterCTL SignalTallyProtcol
CamCTL1 Setting range 1 to 5 IN1 to 16, 
IN-A1, IN-A2, IN-
B1, IN-B2, None Enable, Disable P/TCont, 
P/TDirt
Default value 1 NoneDisableP/TCont
CAM    2 ParameterCTL PosCont PTSpeed Power ↓
CamCTL2 Setting range 1 to 5 PanTilt, 
Zm/Focs Fast, Middle, Slow On, Off
Default value 1 PanTiltFastOn
CAM    3 ParameterCTL C-Menu ↓ItemVal/Y/N
CamMenu Setting range 1 to 5 On, OffCursorCursor
Default value 1  — — —
XPT XPT    1 Display only
XPT: 1  2  3  4  5  6  7  8
SIG:BK  1  2  3  4  5  6  7
Status1
XPT    2 Display only
XPT: 9 10 11 12 13 14 15 16
SIG: 8  9 10 11 12 13 14 Sf
Status2
XPT    3 Display only
XPT:17 18 19 20 21 22 23 24
SIG:15 16 A1 A2 B1 B2 -  - 
Status3
XPT    4 Display only
XPT:25 26 27 28 29 30 31 32
SIG:-  PG PV KO CL M1 M2 Sf
Status4
XPT    5 ParameterXPT SignalShiftSf-Lock
XPTAsign Setting range 1 to 32 IN1 to 16, 
IN-A1, IN-A2, IN-
B1, IN-B2, Black, 
CBGD, CBAR, 
FMEM1 to 4, 
PGM, PVW, CLN, 
MV1, 
MV2 (AUX bus 
only), None Off, Right, Left On, Off
Default value  —  —RightOff
XPT    6 ParameterTiming
XPT Swch Setting range Any, Field1, Field2
Default value Any
8. Setting menu table