Panasonic Memory Card Portable Recorder Player Ajhpm110 Operating Instructions

Clip Management: Attaching Metadata to Clips61
 Clip Management
3Use the cursor buttons to move the pointer and press 
the SET button. 
Use this function to check loaded metadata settings. 
4While viewing metadata settings, use the cursor 
buttons to move the cursor to the setting you want to 
change and press the SET button. 
The on-screen keyboard appears. Make the required 
changes.
➝For details, refer to “Using the On-screen Keyboard” 
(page 33). 
◆NOTE: 

 Use the cursor buttons to select a metadata...

62Clip Management: Attaching Metadata to Clips
4Select [ON] and press the SET button.
This setting records the loaded metadata simultaneous 
with video recording. The USER CLIP NAME is attached to 
metadata as specified by the recording method.
5Press the MENU button to end setup. 
6Record video on this unit. 
◆NOTE: 
 When [OFF] is selected in step 4, no metadata is attached to the 
clip.  

Clip Management: Formatting P2 Cards63
 Clip Management
Formatting P2 Cards
1Open the thumbnail screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [OPERATION] – 
[FORMAT] – [SLOTn] (the number of the P2 card slot 
containing the card to format) and press the SET 
button. 
4Select [YES] and press the SET button.
The card is now formatted. 
◆NOTE: 
 To cancel formatting, select [NO] and press the SET button. 
5Press the SET button when the completion message 
appears. 
◆NOTE: 
 Repeat the...

64Clip Management: Checking Card Status
Checking Card Status
Use the following procedure to display P2 card slot status and P2 card usage and other card information on the screen for 
checking. 
Select whether remaining capacity or used capacity should 
appear in the P2 card information. 
1Open the thumbnail screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [PROPERTY] – 
[PROPERTY SETUP] – [P2 CARD CAP].
4Use the cursor buttons to select an item and press 
the SET button.
MEMO:An...

Clip Management: Checking Card Status65
 Clip Management
After completing the settings described on the previous page, 
you can use the procedure described below to check the 
status of P2 cards in P2 card slots. 
1Open the thumbnail screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [PROPERTY] – 
[CARD STATUS] and press the SET button to 
display P2 card status. 
1)Write protect mark
A write-protected P2 card is indicated by the   mark 
displayed here. 
2) P2 card status
The remaining...

66Clip Management: Checking Card Status
6)Card warning messages 
This warning appears when the following P2 cards are 
inserted. 
[RUN DOWN CARD]
The card has been overwritten the maximum number 
of times.
[DIR ENTRY NG CARD]
Directory structure does not conform to standard 
specifications. 
Use Detailed P2 Card Status for more information. 
4Press the EXIT button to end processing. 

Using Play List: Play List Function67
 Using Play List
Using Play List
Play List Function
The play list function allows you to create lists (play lists) that 
register clip sections recorded on P2 cards to continuously 
play them back in list order. List editing is fast and efficient 
since no actual data is involved. 
In normal playback, playback starts from the starting point 
and goes on until the last clip. 
In a play list playback, the user first creates a play list that 
defines the IN points...

68Using Play List: Play List Function
1.Display status
The following type of event screens are displayed. 
2.Play list
The play list shows a list of events. Up to 100 events 
(up to 100 audio events can also be added). The 
current cursor position is shown by a yellow frame.
The selected event is shown by blue characters.
The overwrite edit mode uses orange to indicate 
unfinalized status.  
The number of the first and subsequent events that 
cannot be played back are indicated in red. 
Play lists...

Using Play List: Play List Function69
 Using Play List
7.Filename
Shows the number of the P2 card slot where the 
current play list is stored and its filename. 
8.Start TC
Displays the start time code value for changing the 
time code during playback. 
9.REMAIN(EXTRA)
Indicates the remaining time available for voice-over 
recording. 
A play list not saved to a P2 card is indicated in gray 
and has no time indication. 
10.P2 card slot status
Displays P2 card and USB hard disk status. 
➝Refer to “Thumbnail...

70Using Play List: Play List Function
1.PLAY LIST button 
Press to switch to play list mode. This button lights in 
the play list mode. 
In the stop mode or when thumbnails are displayed, 
press this button to open the play list screen. 
To exit the play list mode, press this button (which is 
lit), the light goes out and the stop mode reappears. 
You cannot switch to the PLAY LIST mode from the 
USB mode. 
2.SET/MULTI SEL button
Use to make single or multiple selections. First press 
the SET button to...