Panasonic Memory Card Portable Recorder Player Ajhpm110 Operating Instructions

Using Play List: Play List Function71
 Using Play List
10.SHIFT + 6.IN buttons
In the overwrite edit mode, hold down the SHIFT button 
and press the IN button to change the P IN (player) 
and R IN (recorder) points. Each press of the button 
changes the indication between P IN ➝ R IN ➝ OFF. 
Use the 12.TRIM +/– button to change the time code as 
necessary. Press 7. [ENTRY] (or SET) button to finalize 
all changes. (When the play list is displayed in 
overwrite edit mode.)
6.IN + 9.OUT buttons
Pressing...

72Using Play List: Play List Function
14.A. DUB button
Use to make voice-overs and to copy to EXTRA. 
➝For details, refer to “Simplified Voice-Over” (page 
95).
15.STILL/PAUSE button
16.REVIEW button
To review all events at the cursor position, hold down 
the SHIFT button and press the PLAY button. Playback 
starts 3 s before the IN point and stops 1 s after the 
OUT point. 
Any unfinalized events are also previewed in the 
overwrite edit mode regardless of cursor location. 
Thus all unfinalized events...

Using Play List: Play List Function73
 Using Play List
You can set whether pressing the STOP   button during 
play list playback should return you to the play list after 
playback or not. Use the following procedure to make the 
desired setting. 
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [SETTING] – 
[STOP MODE]. 
4Select [RETURN] or [STAY] and press the SET 
button.
5Press the MENU button to end setup. 
◆NOTE:
 STAY is the recommended setting during playback...

74Using Play List: Creating Play Lists
Creating Play Lists
The workflow for creating a play list is given below. A play list can be up to 24 hours long. 
This section describes how to delete a play list stored in the 
play list area of this unit and how to prepare a new play list. 
1Select an edit format in the setup menu. 
 Select an edit format. The unit will then be able to play 
back only the selected format. 
 Select playback channels for added audio. 
◆NOTE: 
The settings in the following setup...

Using Play List: Creating Play Lists75
 Using Play List
Follow the steps below to replace audio channels after event 
registration. 
1Select one or multiple events whose channels you 
want to replace in the play list screen. 
2Press the MENU button, use the cursor buttons to 
choose [SETTING] – [AUDIO CH] and press the SET 
button. 
3Select the channels that will be replaced. 
Example: Make the following registration to switch CH1 
and CH2 locations. 
[AUDIO CH]- [CH1]=CH2
[CH2]=CH1
[CH3]=CH3
[CH4]=CH4...

76Using Play List: Creating Play Lists
6Press the SET button.
This registers an event where the start of the clip is the IN 
point and its end is the OUT point. 
◆NOTE:
 When the selected clip has a different format from that of the 
current play list, an error occurs and the clip cannot be 
registered. 
 In the play list screen, you can also hold down the SHIFT button 
and press the ENTRY button to add a clip as an event. 
 When added events exceed 100, no more events can be 
added. 
You can specify an...

Using Play List: Creating Play Lists77
 Using Play List
This section describes how to import play lists stored on a P2 
card and how to add an event at the cursor location. 
1Open the play list screen. 
2Use the cursor buttons to choose the location where 
you want to insert the event. 
3Press the MENU button. 
4Use the cursor buttons to choose [FILE] – 
[APPEND].
5Use the cursor buttons to select the number of the P2 
card slot containing the play list you want to import 
and press the SET button....

78Using Play List: Saving Play Lists
Saving Play Lists 
Use the steps below to name play lists. 
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [OPERATION] – 
[CHANGE PLAYLIST NAME] and press the SET 
button. 
4Use the on-screen keyboard to enter a name and 
press OK. 
5Close the menu and register the name in PLAYLIST 
NAME. 
◆NOTE: 
 The file name must be saved using [FILE] – [SAVE] or [FILE] – 
[SAVE AS].   
Use the steps below to save a play list stored by the...

Using Play List: Saving Play Lists79
 Using Play List
◆NOTE: 
 The filename is automatically generated and cannot be 
changed. Changing the filename on a PC will make it impossible 
to load. 
 Updated play list files cannot be loaded by older versions or 
devices. Store old versions of the play list in the unit before using 
them. They cannot be edited in the form they are loaded. 

80Using Play List: Editing Play Lists
Editing Play Lists 
Play lists can be edited in a number of different ways. 
Open the play list screen to view the play list in the play list 
area of memory in this unit. 
The procedure below describes how to load a play list stored 
on a P2 card or SD memory card to replace the play list in the 
play list area of memory in this unit. 
1Open the play list screen. 
2Press the MENU button. 
3Use the cursor buttons to choose [FILE] – [OPEN]. 
4Use the cursor buttons to...