Panasonic Memory Card Portable Recorder Player Ajhpm110 Operating Instructions

Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards111
 Using USB Connectors and SD/SDHC Memory Cards
Using SD/SDHC Memory Cards
This unit supports SD/SDHC memory cards. 
◆NOTE:
 Current SETUP menu settings can be saved to and loaded from an 
SD memory card. For details, refer to page 140.
Use the following procedure to display SD memory card 
status on screen for checking. 
1Open the thumbnail screen. 
2Press the MENU button.
3Use the cursor buttons to choose [PROPERTY] – 
[DEVICE]...

112Using USB Connectors and SD/SDHC Memory Cards: Using SD/SDHC Memory Cards
◆NOTE: 
 Repeat the procedures in steps 2 to 4 to format P2 cards in other 
P2 card slots. 
6Press the MENU button to end processing.  

Using USB Connectors and SD/SDHC Memory Cards: External Remote Control113
 Using USB Connectors and SD/SDHC Memory Cards
External Remote Control
Use the RS-422A or IEEE1394 interface to send commands to 
an external device to control it.
The following functions permit remote control. 
 PLAY, STOP, STILL, FF, REW, SHTL, JOG
 Counter and status LED indication
1Perform either of the following steps when the 
THUMBNAIL and PLAY LIST buttons are off.
 In the RS-422 interface, press the EVENT button.
 In the...

114Using USB Connectors and SD/SDHC Memory Cards: External Remote Control Registering IN and OUT points makes possible automatic 
recording (AUTO CAPTURE) between those two points. 
1Enter the mode that permits control of external 
devices.
Press the EVENT button when the THUMBNAIL and PLAY 
LIST buttons are off.
2Select an area for capture. 
 Use the following buttons to select an area for capture. 
3Hold down the SHIFT button and press the REC 
button.
 The specified area is automatically registered on...

Setup: Unit Setup115
 Setup
Setup
Unit Setup
The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU. 
The SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five 
user files (USER1 to USER5) can be saved. These settings (up to 4 files) can be written to and loaded from SD memory cards. 
This unit can possess up to five user files, each of which can 
be selected from a menu...

116Setup: Changing Settings
Changing Settings
The menus on the LCD monitor or a monitor (when the SUPER switch on the right side of the LCD monitor is set to “ON”) 
connected to the ANALOG COMPOSITE MONITOR OUT connector make it possible to change settings. 
1Press the MENU button.
The setup menu screen appears on the LCD monitor and 
the counter display indicates the setup menu number. 
2Select the file to change.
Hold down the SHIFT button and press the FF  button 
or the REW  button to switch to the...

Setup: Changing Settings117
 Setup
Assign a setting item to the PF button and perform the 
following operation to change setting values. 
➝For details on how to assign items to the PF button, refer to 
“Setup menu No. A04 to A06 (PF1 ASSIGN to PF3 ASSIGN)” 
(page 139).
1Press the PF (EXIT) button. 
Registered items appear on the LCD monitor. 
2Press the PF button (1 to 3) required to bring up the 
item to change.
Each press of the button updates the setting value. 
3Press the PF (EXIT) button to end...

118Setup: Item Settings
Item Settings
The system menu specifies analog component (HD) output, analog composite output, phase adjustment of audio output, 
system frequency, phase of SD REF input of HD output, and system file lock. 
* An underlined setting
 indicates an initial value.
SYSTEM
ItemSetting
Settings and brief function descriptionFR
No.SUPER
DISP.FR
No.SUPER 
DISP.
12 SYS H(HD)0000
|
1375
|
2750–1375
|
0
|
1375Adjusts system phase of analog component (HD) output and HD SDI output (in 13.5 ns...

Setup: Item Settings119
 Setup
25 SYSTEM FREQFor AJ-HPM110P Sets system frequency. 
0: 59.94Hz
1: 50Hz
2: 23.98 Hz
3: 24 Hz
4: 29.97 Hz
5: 23.98 Hz
Receives 59.94 Hz input. Select this frequency to record 2:3 pull-down converted 
(24-frame signal) output from VariCam: AJ-HDC27 series camera, AJ-HPX2000/2100, 
AJ-HPX3000 or other camera.
6: 24Hz
Receives 60Hz input. Select this frequency to record 2:3 pull-down converted 
(24-frame signal) output from VariCam: AJ-HDC27 series camera.
7: 25Hz
8: 25Hz...

120Setup: Item Settings This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12 
and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and other 
displays, sets recording formats, sets the formats that can be added to the play list and sets the time of the internal clock. 
* An underlined setting
 indicates an initial value.
BASIC
ItemSetting
Settings and brief function descriptionFR...