Panasonic Memory Card Portable Recorder Player Ajhpm110 Operating Instructions

Using Play List: Playing Back Play Lists101
 Using Play List
Use the following procedure to play back the play list. 
1Open the play list screen. 
2Use the cursor buttons to select the event you want 
to start playback. 
3Set the playback time code as necessary.
➝For details, refer to “Setting the Playback Time Code 
(TC)” (page 100).
4Press the PLAY   button. 
Playback starts from the cursor location and continues 
until the end of the play list or until all playable events have 
been played. 
◆NOTE:...

102Using Play List: Creating New Clips From the Play List (Edit Copy)
Creating New Clips From the Play List (Edit Copy)
You can use the play list to create a new clip. 
This function is called edit copy. 
◆NOTE: 
 The playback time code setting allows you to start the time code 
from a set value after edit copy. Set the playback time code as 
necessary.
➝For details, refer to “Setting the Playback Time Code (TC)” (page 
100).
 Play list files created on the AJ-SPD850 can be loaded but not 
edited....

Using USB Connectors and SD/SDHC Memory Cards: Using USB Connectors103
 Using USB Connectors and SD/SDHC Memory Cards
Using USB Connectors and SD/SDHC Memory Cards
Using USB Connectors
You can use the USB 2.0 connector on this unit to connect a hard disk or a PC to save and manage clips efficiently. 
Connect a USB 2.0 hard disk to save P2 card data, view 
saved data and import data to P2 cards. 
A USB 2.0 connection with a PC allows you to use P2 cards 
inserted in the slots on this unit as mass storage....

104Using USB Connectors and SD/SDHC Memory Cards: Connecting a PC to This Unit
Connecting a PC to This Unit
1Press the PC button when this unit is idle. 
2Select [USB DEVICE] in the confirmation screen and 
press the SET button.
“USB DEVICE” flashes on the LCD monitor to indicate that 
the unit is entering the USB host mode. After the mode 
switch, “USB DEVICE DISCONNECT” appears on the LCD 
screen. This message is replaced by a “USB DEVICE 
CONNECT” message when the connection with the PC is 
completed....

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk105
 Using USB Connectors and SD/SDHC Memory Cards
Using This Unit With a Hard Disk
This unit supports the following hard disks types. 
 Panasonic portable hard disk unit P2 store (AJ-PCS060G)
 A hard disk that supports the USB 2.0 interface
Available functions depend on the type of hard disk used. In 
the host mode, “PARTITION:” in the left half of the Explorer 
screen provides information on the hard disk that is 
connected...

106Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk
1Press the PC button when this unit is idle. 
◆NOTE:
 In the play list mode, the PC button is not available during 
remote operation. 
2Select [USB HOST] in the confirmation screen and 
press the SET button.
“USB HOST” flashes on the LCD monitor to indicate that 
the unit is entering the USB host mode. After the mode 
switch, the thumbnail screen appears and “USB HOST” is 
indicated in the lower right corner. 
3Use USB...

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk107
 Using USB Connectors and SD/SDHC Memory Cards
7When the confirmation message appears again, 
select [YES] and press the SET button.
This starts hard disk formatting. 
A TYPE S hard disk allows you to export data to a hard disk 
(by writing data from a P2 card to a hard disk) in P2 card units. 
First use this unit to format the hard disk. Up to 23 cards can 
be exported to a hard disk. 
The exported data from a P2 card is...

108Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk Use this function to view hard disk information. 
1Switch to the USB host mode.
2Connect a USB hard disk.
3Open the thumbnail screen. 
4Press the MENU button. 
5Use the cursor buttons to choose [HDD] – 
[EXPLORE] and press the SET button.
◆NOTE:
 Use the right and left cursor buttons to switch between date lists 
and partition names. 
1)Display status
The name of the screen (HDD-EXPLORE) 
2)Disk information
The following...

Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk109
 Using USB Connectors and SD/SDHC Memory Cards
You can display thumbnails and manage clips stored on the 
hard disk in the same way as clips on P2 cards. 
1Open the explorer screen.
2Use the cursor buttons to select the partition where 
you want to view thumbnails and press the SET 
button.
A thumbnail of the clip on the partition now appears. 
1)Display status
Indicates the status of thumbnails of hard disk clips....

110Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk You can import (loading data from a hard disk to a P2 card) 
data in partition units (card units) at high-speed to a P2 card 
that has the same capacity as the source card. 
1Insert the P2 card to which the data will be imported.
2Open the P2 thumbnail screen. 
3Press the MENU button. 
4Use the cursor buttons to select [HDD] – [EXPLORE] 
and press the SET button.
5Select the partition that will be copied and press the 
SET...