Panasonic Memory Card Portable Recorder Player Ajhpm110 Operating Instructions

Setup: Item Settings131
 Setup
620DOWNCON 
MODE
0000
0001
0002
FIT_V
FIT_H
FIT_HV
Specifies the aspect ratio during down conversion. 
0: Changes the ratio to adjust input size to output size as required by vertical axis. (The 
aspect ratio stays the same.)
1: Changes the ratio to adjust input size to output size as required by horizontal axis. (The 
aspect ratio stays the same.)
2: Changes the ratio to adjust input size to output size as required by horizontal and 
vertical axis. (The aspect ratio may be...

132Setup: Item Settings
651 HUE STYLE(SD)0000
0001
Pb-Pr
U-V
Specifies the rotational axis of chroma phase adjustment. 
0: Rotates in a perfect circle in an SDI (component style) vectorscope.
1: Rotates in a perfect circle in an analog (composite style) vectorscope.
NOTE:
This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.
653 Y LVL (HD)0000
|
1000
|
14130.0%
|
100.0%
|
141.3%Adjusts the Y level of HD SDI and HD analog component output (– ∞ to 0 dB to +3 dB).
NOTE: 
This setting is...

Setup: Item Settings133
 Setup
663 C LEVEL0000
|1000
|
14130.0%
|
100.0%
|
141.3%Adjusts the chroma level (– ∞ to 0 dB to +3 dB). 
NOTE: 
 This setting is available when CMPST is set in menu No. 650 STYLE.
 Chroma level adjustment is available only for output. 
664 HUE/C PHASE0000
|
0062
|
0124–31.0
|
0.0
|
31.0Adjusts chroma phase (approximately –30 to +30°)
NOTE: 
 This setting is available when CMPST is set in menu No. 650 STYLE. 
 Chroma phase level adjustment is available only for output. 
665...

134Setup: Item Settings
684 EDH(SD)00000001
OFF
ONSpecifies whether or not EDH is superimposed on SDI OUT signals.
0: Signals are not superimposed.
1: Signals are superimposed.
685 ESR MODE(SD)0000
0001
OFF
AUTOSpecifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit. 
0: ESR is forcibly set to off. 
1: ESR is automatically turned on and off depending on operating mode.
688 CC REC0000
0001
OFF
ONSpecifies whether or not the closed caption signal that is superimposed on the...

Setup: Item Settings135
 Setup
This menu is used for audio settings. 
* An underlined setting
 indicates an initial value.
693 GAMMA SEL
0000
0001
0002
0003
OFF
GAMMA1
GAMMA2
GAMMA3Selects gamma correction.
0: No gamma correction
1: Corrects video shot by Varicam or in the 
FILM REC mode on an AJ-HPX3000 to film-
quality video. (Equivalent to TELECINE 5 on 
the AJ-GBX27HD Gamma Corrector)
2: Corrects video shot by Varicam or in the 
FILM REC mode on an AJ-HPX3000 to film-
quality video. (Equivalent to...

136Setup: Item Settings
708 CH3 OUT LV00000001
0002
00034dB
0dB
–3dB
–20dBSpecifies the standard level for audio output (CH3).
709 CH4 OUT LV0000
0001
0002
00034dB
0dB
–3dB
–20dBSpecifies the standard level for audio output (CH4).
725 REC CH1
0000
0001
0002
0003
0004
0005
CH1
CH2
CH3
CH4
CH1+2
CH3+4Specifies the input signal to be recorded on the audio CH1.
0: Audio input CH1 signal
1: Audio input CH2 signal
2: Audio input CH3 signal
3: Audio input CH4 signal
4: Mixed audio input CH1 and CH2 signal
5:...

Setup: Item Settings137
 Setup
776 REF LEVELFor AJ-HPM110P Specifies the standard level. 
0: 20 dB
1: 18 dB
2: 12 dB
0000
0001
0002
FS-20
FS-18
FS-12
For AJ-HPM110E
0000
0001
0002FS-20
FS-18
FS-12
777 CH2 MIC PWR0000
0001
OFF
ON
Turns on and off the CH2 microphone power supply. 
0: Does not use the microphone power supply.
1: Uses the jack switch to turn the microphone power supply on and off.
778 AUD OUT DLY
0000 
0001OFF 
ON
Determines whether or not the output timing of analog audio output (including...

138Setup: Item Settings This menu is used for setting up the digital video interface. 
* An underlined setting
 indicates an initial value.
Subscreen
01 CH1 MIX
0000
0001
0002
0003
CH1
CH2
CH3
CH4Specifies the playback channels that will be mixed and recorded on CH1. 
02 CH2 MIX0000
0001
0002
0003CH1
CH2
CH3
CH4Specifies the playback channels that will be mixed and recorded on CH2. 
03 CH3 MIX0000
0001
0002
0003CH1
CH2
CH3
CH4Specifies the playback channels that will be mixed and recorded on CH3. 
04 CH4...

Setup: Item Settings139
 Setup
This menu is used for menu settings. 
* An underlined setting
 indicates an initial value.
890 DIF AUD OUT
0000
0001
CH1+2
CH3+4
Specifies the output channels when the audio signals are in 4-channel mode and output 
in the DVCPRO (25 Mbps) format and a DV clip is played back. 
0: CH1 and CH2
1: CH3 and CH4
MENU
ItemSetting
Settings and brief function descriptionRemarksFR
No.SUPER
DISP.FR
No.SUPER 
DISP.
A00 LOAD
0000
0001
0002
0003
USER2
USER3
USER4
USER5Specifies user...

140Setup: Item Settings Use the steps below to write SETUP menu settings to or load 
from SD memory cards. The unit can handle up to four files 
and enables the input of titles. 
1Press the MENU button, select A10 CARD READ 
from USER1 in the SETUP menu and press the SET 
button. 
2Select the files to be read in the file menu that 
appears and press the SET button. 
 Files that are not written are indicated as [NO FILE]. 
 “NO CARD” is indicated when no SD memory card is 
inserted. 
3Press the button...