Panasonic Memory Card Portable Recorder Player Ajhpm110 Operating Instructions

Introduction: Jog and Shuttle Operations Using the Search Dial41
 Introduction
Jog and Shuttle Operations Using the Search Dial
The search dial is used to search and check video. 
Each press of the dial alternates it between SHTL mode and 
JOG mode. When the power is turned on, the search dial will not operate 
unless it is first returned to the STILL position. 
1Press the search dial so that it remains pressed in. 
The jog mode is now engaged. 
2Turn the search dial. 
The dial’s click stops are released...

42Clip Management: Thumbnail and Clip Management
Clip Management
Thumbnail and Clip Management
This unit provides a thumbnail screen for managing clips. A 
clip is a single data item that contains video, audio, metadata 
and other additional information. Normally, a clip is one shot 
generated from the start of recording until recording stops. A 
shot that spans multiple P2 cards is handled as a single clip.
The thumbnail screen shows a list of thumbnails. Each 
thumbnail, which is the first frame of...

Clip Management: Thumbnail and Clip Management43
 Clip Management
1.Display status
Display status indicates the type of thumbnails 
displayed on the screen. 
➝For details on how to change display, refer to 
“Switching the Type of Information That is 
Displayed” (page 45).
2.Record mode
Indicates the record mode of the clip at the cursor 
position. 
3.System format
Indicates the recording format of the clip at the cursor 
position. 
4.Duration
Indicates the duration of the clip at the cursor position....

44Clip Management: Thumbnail and Clip ManagementInstead of  ,   appears to indicate that a clip is not 
in the P2 standard format. 
16. P2 card slot number and hard disk drive status
P2 card and USB hard disk drive status is indicated as 
described below. 
17.Status message
Shows messages indicating processing status. For 
example, screen updating shows an [UPDATING] text 
message and a rotating   icon.  -   
(white)The number of the P2 card slot that 
contains a P2 card is indicated in white.
 -...

Clip Management: Thumbnail and Clip Management45
 Clip Management
The thumbnail screen can be customized to suit operating 
conditions and improve efficiency. 
1Open the thumbnail screen. 
2Press the MENU button. 
3Use the cursor buttons to select the clip type that 
should appear under [THUMBNAIL]. 
4Press the SET button. 
◆NOTE: 
(These operations can also be performed using buttons.)
 Press SHIFT + IN and the indication changes in the following 
order each time these buttons are pressed: SELECTED ➝...

46Clip Management: Thumbnail and Clip Management The thumbnail display can be customized to suit different 
operating needs. The following describes procedures for 
changing thumbnail display indicators and data settings. 
1Open the thumbnail screen. 
2Press the MENU button. 
3Use the cursor buttons to select the item that should 
appear under [THUMBNAIL] – [SETUP]. 
* An underlined setting indicates an initial value.
Setting Items to Display 
ALL HIDE: ON Hides all indicators
OFF
Indicators are...

Clip Management: Thumbnail and Clip Management47
 Clip Management
4Press the SET button. 
◆NOTE: 
 Selecting [THUMBNAIL INIT] opens a confirmation screen. 
Select [YES]. 
5Press the MENU button to end processing. 
1Attach a text memo to video you want to edit. 
➝For details, refer to “Attaching Text Memos” (page 50).
2Change thumbnail display to text memo display. 
3Move to the row below the text memo and move the 
cursor to the thumbnail you want to edit.
4Press the MENU button. 
5Use the cursor buttons...

48Clip Management: Selecting Clips
Selecting Clips
Select clips for processing in the thumbnail screen as 
described below. 
1Use the cursor buttons to place the yellow frame 
(cursor) on the desired clip.
◆NOTE: 
 Hold down the SHIFT button and press the REW/FF button or the 
4/5 buttons to move the cursor to the first or last clip. 
2Press the SET button. 
A blue frame appears on the clip selected with the cursor 
to indicate that it is selected. 
◆NOTE: 
 Repeat steps 1 and 2 to select multiple clips....

Clip Management: Playing Back Clips49
 Clip Management
Playing Back Clips
1Open the thumbnail screen. 
2Use the cursor buttons to select the clip you want to 
play back.
◆NOTE: 
 The search dial can also move the cursor.
 Hold down the SHIFT button and press the REW/FF button or the 
4/5 buttons to move the cursor to the first or last clip. 
3Press the PLAY   button 
Playback starts from the clip the cursor is on. 
After the clip at the cursor location has been played, 
subsequent clips are played back...

50Clip Management: Attaching Text Memos and Shot Marks
Attaching Text Memos and Shot Marks
A text memo can be attached in a clip to mark a specific 
location. The user can attach shot marks to distinguish clips 
from each other. This function is not available on cards where 
the write protect switch has been set to PROTECT. 
Use the NEXT and PREV buttons to locate attached text 
memos during video playback.
1Press the TEXT MEMO button during recording, 
playback or when thumbnails are displayed.
 Press...