Panasonic Memory Card Portable Recorder Player Ajhpm110 Operating Instructions

11
■Panasonic makes no guarantees for your recordings
Please understand that Panasonic makes no guarantees for your recordings in cases where images and/or sound were not re-
corded as you intended due to problems with this unit or P2 cards.
■What to remember when throwing memory cards away or transferring them to others
Formatting memory cards or deleting data using the functions of the unit or a computer will merely change the file management
information: it will not completely erase the data on the...

12Accessories
Accessories
Power cord ................................................... 1 (AJ-HPM110P)
2 (AJ-HPM110E)
CD-ROM ................................................................................ 1
Ferrite core* ........................................................................... 4
* Attach a ferrite core at each cable end when making cable connections to the USB2.0 connector. 
 AVC-Intra Codec board 
AJ-YBX200G
◆NOTE: 
 Do not use optional boards other than the above product. 
Included...

  Opening and Closing the Top Panel13
Opening and Closing the Top Panel
◆NOTE
 Take care to avoid pinching your fingers when opening and
closing the top panel. 
 Check that the card lock is set to on before closing the top
panel. Be sure to set the card lock to on before closing the
top panel. Never use force to close it when the lock is not
set to on as this will damage the unit. 
1Pull out the handle, then pull the top of the lever to-
wards you to release the lock. 
2Free the bottom of the lever. Then...

14Introduction: Features
Introduction
Features
The AJ-HPM110 is a portable memory card recorder/player equipped with six P2 card (*) slots and a 9-inch color LCD monitor. 
Capability to record and play back audio and video in the compressed DVCPRO HD, DVCPRO50, DVCPRO/DV and AVC-Intra 
(option) formats on six P2 cards (*) allows you to use the unit like a conventional editing VTR player. The AJ-HPM110 comes 
with the following features. 
MEMO:A memory card with the “P2” logo (for example, the separately...

Introduction: Features15
 Introduction
■Connecting a P2 Card Camera
A P2 card recorded in a P2 camera recorder plugs directly 
into a PC card slot in this unit for immediate access. The P2 
card is a semiconductor memory card that Panasonic 
developed for professional AV use.
●P2 card and recording times
Recording time on a single 32 GB P2 card
*1 Assumes installation of an AJ-YBX200G AVC-Intra Codec board. 
*2 Includes recording of DVCPRO HD with pull-down at 30P, 24P and 
25P. 
*3 For 2-channel audio...

16Introduction: Features ■Dial Jog/Dial Shuttle
The jog provides slow playback
*1 at rates between -1.0 to 
+1.0. 
The shuttle allows high-speed forward and reverse playback 
up to 100 times normal speed. At speeds up to 10x, the sound 
is also audible. 
*1 When 59.94, 50, 29.97, 25 or 60-25 is selected in setup menu No. 
25 SYSTEM FREQ.
■Thumbnails for Managing Clips Visually
The 9-inch color LCD monitor on the front panel displays clips 
(thumbnails) that represent P2 card content. Settings can be...

Introduction: Control Reference Guide17
 Introduction
Control Reference Guide
1.POWER switch
Turns the power on and off. 
2.METER (FULL/FINE) selector button
Switches the scale of the audio level meter. 
3. AUDIO MONITOR SELECT button
Switches the audio signals to be output to the MONITOR L/R 
connectors and the headphones jack. Each press of the 
button switches the output signals to the MONITOR L/R 
connectors and the headphones jack as described below.
The L/R lamps in the audio level meter indicate...

18Introduction: Control Reference Guide
4.METER SELECT switch
Switches to CH1-4 or CH5-8 in the audio meter and the 
monitor. 
5.INPUT SELECT buttons
Switch between video and audio input signals. You 
can also switch the input signals to internal signals 
selected in setup menu No. 601 (VIDEO INT SG). 
◆NOTE: 
 Switching of input signals is not available when the 
THUMBNAIL and PLAY LIST buttons are on.
 The INPUT TRACK setting is available in overwrite mode 
when the PLAY LIST button is on.
➝For...

Introduction: Control Reference Guide19
 Introduction
➝For details, refer to “Simplified Voice-Over” (page 
95), and “Copying Event Audio to EXTRA track” 
(page 87).
15.REC button 
Press this button and the PLAY button simultaneously 
to start recording. Press this button during playback 
mode to check EE mode video and audio on the 
monitor (EE mode is not available during IEEE1394 
input). Press the STOP button to return to the original 
video and audio. 
To start AUTO CAPTURE when the unit is...

20Introduction: Control Reference Guide
24.TEXT MEMO/MARKER button
TEXT MEMO: Press this button during recording 
and playback where you wish to 
enter a text memo. In the thumbnail 
screen, press this button to add a 
text memo at the start of a clip.
➝For details, refer to “Attaching 
Text Memos” (page 50).
MARKER: In the thumbnail screen, while 
pressing the SHIFT button, press 
this button to turn marker display of 
the clip at the pointer position on 
and off.
➝For details, refer to “Attaching 
Shot...