Panasonic Memory Card Camera Recorder Ajhpx3000g Operating Instructions

121Manipulating Clips with Thumbnails : Deleting Clips
 Manipulating Clips with Thumbnails
1Select a desired text memo in a clip by carrying out 
steps
 1-3 for [Playing back a clip at the position where 
a text memo is recorded] (page 120).
2Move the pointer to the desired text memo, and then 
press the SET button. You can select more than one 
text memo.
3Press the THUMBNAIL MENU button to select 
OPERATION 
> COPY.
4User the cursor buttons and SET buttons to select the 
destination slot. Then, select...

122Manipulating Clips with Thumbnails : Reconnection of Incomplete Clips Incomplete clips may be generated when clips recorded on
multiple P2 cards (connected clips) are separately copied
to different cards. Reconnection function generates one
clip (the original, connected clip) from incomplete clips.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor and SET button to select incomplete 
clips to reconnect.
Usually, thumbnails of incomplete clips (clips with...

123Manipulating Clips with Thumbnails : Setting of Clip Meta Data
 Manipulating Clips with Thumbnails
Information such as the name of person who shot the video, the name of the reporter, the shooting location, or a text 
memo can be read from the SD memory card, and can be recorded as Clip Meta Data.
1Insert the SD memory card that contains the Clip 
Meta Data (metadata upload file).
2Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
‹Note
Press the thumbnail button while...

124Manipulating Clips with Thumbnails : Setting of Clip Meta Data THUMBNAIL:
Displays the location of the frame (frame offset)
and the size (height and width) of the image
selected as the thumbnail image.
*1 The USER CLIP NAME recording method is
selectable. For details, refer to [Selecting the USER
CLIP NAME recording method] (page 125).
*2 Be sure to enter TEXT when entering MEMO. It is
not possible to record only PERSON or OFFSET.
‹Note
AJ-HPX3000 only displays printable ASCII 
characters.
The...

125Manipulating Clips with Thumbnails : Setting of Clip Meta Data
 Manipulating Clips with Thumbnails
S e t  O N / O F F  i n  M E TA  D ATA  > RECORD from the
thumbnail menu. The factory setting is OFF.
S e l e c t  M E TA  D ATA  
> USER CLIP NAME from the
thumbnail menu to select the recording method. Two
options are available: TYPE1 and TYPE2.
* The COUNT value is indicated as a four-digit number.
The COUNT value is incremented each time a new clip
is captured if clip metadata has been read in and...

126Manipulating Clips with Thumbnails : Setting of Proxy (optional) By attaching the video encoder card (AJ-YAX800G,
optional) either to the optional slot or Slot 5, it is possible to
specify the proxy recording setting.
The video encoder card is not recognized when inserted if
the power for the unit is turned ON. Insert the video encoder
card after turning off the power for the unit.
Select OPERATION > DEVICE SETUP > PROXY from
the thumbnail menu to specify the setting.
For the method of installation...

127Manipulating Clips with Thumbnails : Formatting SD memory cards
 Manipulating Clips with Thumbnails
SD memory cards can also be formatted from the
thumbnail screen. With an SD memory card inserted into
the camera-recorder, perform the following operation:
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button and  select 
OPERATION 
> FORMAT from the thumbnail menu. 
The following screen appears. Select “SD CARD”.
Select “EXIT” if formatting is...

128Manipulating Clips with Thumbnails : Setting the Thumbnail Display Mode The thumbnail display mode can be customised to suit
your preferences. 
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Press the THUMBNAIL MENU button and  select 
THUMBNAIL
àSETUP from thethumbnail menu. 
The following screen appears. 
ALL HIDE :
ON
All indicators are not displayed.
OFF
Indication/No indication will be set 
depending on the following menu. The 
factory settings are as...

129Manipulating Clips with Thumbnails : Properties
 Manipulating Clips with Thumbnails
The clip’s properties and the P2 card’s status are displayed.
It is possible to edit and rewrite recorded clip metadata while clip properties are displayed.
From the thumbnail menu, select PROPERTY 
> CLIP
PROPERTY.  The following screen appears. 
1.Clip Number
2.Thumbnail
3.Clip Information 
Indicates the indicators added to the clip and the
number of text and voice memos added to the clip.
The   mark appears if the...

130Manipulating Clips with Thumbnails : Properties
3Press the SET button
The input window (soft keyboard) for modifying 
metadata is displayed. Use the keyboard to modify 
the metadata.
The keyboard operation is the same as [Checking and 
modifying read metadata] (page 124).4Press OK on the keyboard to write the modified 
metadata on the clip and return to the metadata 
window.
The input window (soft keyboard) for modifying 
metadata is displayed. Use the keyboard to modify 
the metadata.
‹Note
zDeleting...