Panasonic Memory Card Camera Recorder Ajhpx3000g Operating Instructions

151Maintenance and Inspections : Warning System
 Maintenance and Inspections
9. 1394  Error
Display window 
indication The 1394 E-¢¢ indicator in the display 
window blinks. For more information, see  
[1394 Error Codes] (page 152).
WARNING lamp Blinks 4 times per second while the 
WARNING lamp recording is continuing.
Tally lampBlinks 4 times per second while the TALLY 
LAMP recording is continuing.
ViewfinderIn the case of Error Code 92, “1394 INITIAL 
ERROR” indicator lights up (during pause 
and...

152Maintenance and Inspections : Warning System The following error codes are displayed in the display window if an error occurs in the camera: 
Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 145) for countermeasures.
Error Codes
Code No.  Description  Type of warnings
E-11 Video initialisation error 1. System Errors
E-27 Recording control error 1. System Errors
E-30 P2 card removal error 2. Card removal error
E-34 LCD microcontroller error 1. System...

153Maintenance and Inspections : Warning System
 Maintenance and Inspections
Warning and Error Display for Thumbnail Operation and USB HOST MODE
ItemMessageDescriptionMeasure
ThumbnailsCANNOT ACCESS! Data cannot be accessed because it is 
corrupted or for other reasons. Restore media and clips to normal state before 
access. 
WRITE 
PROTECTED!The P2 or SD card is write protected.  Insert write-enabled media. 
CARD FULL! The P2 or SD card is full.  Insert media with sufficient capacity. 
NO CARD! No P2 or...

154Maintenance and Inspections : Warning System
HDD
¢USB HOST 
MODE
£
HDD CAPACITY 
FULL!Not enough space left on the hard disk.  There is not enough space on the connected hard 
disk. Use a new hard disk or formatted hard disk. 
TOO MANY 
PARTITIONS!There are too many partitions.  Hard disks can handle up to 23 partitions. Use a 
new hard disk or formatted hard disk. 
HDD 
DISCONNECTED!The unit is not connected to a hard disk.  Reconnect the USB cable. If the hard disk does 
not operate normally, turn...

155Menu : Menu Configuration
 Menu
About Menu Description Tables 
USER MENU
USER MENU SELECT SYSTEM SETTING
PA I N T
CAM OPERATION
  SYSTEM MODE
  OPTION MODE
  REC FUNCTION  OUTPUT SEL
  GENLOCK
  RGB BLACK CONTROL
  LOW SETTING
  MID SETTING
  CAMERA ID
  SHUTTER SPEED
  SHUTTER SELECT  USER SW  SW MODE  WHITE BALANCE MODE
  LENS/IRIS  USER SW GAIN   MATRIX
  COLOR CORRECTION
  SYSTEM SETTING(USER)  PAINT(USER)
  VF(USER)
  CAM OPE(USER)
  FILE(USER)
  MAINTENANCE(USER)
  MAIN OPE(USER)   SKIN TONE...

156Menu : Menu Configuration
USER MENU:USER MENU is factory-set. The menu can
be configured to suit your preferences by
specifying each option according to your
purposes and frequency of use, through the
 screen, which is
accessible from the MAIN MENU page. 
For more information, see [Selecting Options
for USER MENU] (page 158).
To display USER MENU, press the MENU
button.
MAIN MENU:Allows you to set all options on the settings
menu. 
This menu has a category-by-category
structure, layered according to...

157Menu : Menu Configuration
 Menu
The menu options are set with the MENU and JOG dial
buttons.
The menu comprises main menu, sub-menus and options
menus. 
The data specified through menu options are written and
saved in the internal memory of the unit.
This section describes how to set options in MAIN MENU.
The other menus can be configured in the same manner
(the method of displaying the menu screen depends on the
particular menu). 
‹ Note
When the unit is in thumbnail mode, the viewfinder
displays...

158Menu : Menu Configuration Go to the USER MENU SELECT page from MAIN MENU.
Then, open relevant options menu screens to select
options to add to USER MENU. 
Only the selected options are displayed as options in
USER MENU. 
For information about how to navigate this menu, see
[Setting Menu Options] (page 157).
‹ Note
Options with [¢] are effective. The number of options that
can be added to USER MENU is 14 
a 3 = 42 (three pages
of options) for camera-related options, and 14 (one page of
options) for...

159Menu : Menu Description Tables
 Menu
The ____ in the Adjustable Range column indicates the
preset mode. 
Menu Description Tables
SYSTEM SETTING
SYSTEM MODE
Items/
Data Saved Adjustable 
Range
 Remarks 
SYSTEM 
MODE1080-59.94i
1080-50i
480-59.94i
576-50i
For setting the system frequency and the 
recording format of the unit.
When this item is switched, turn “OFF” 
the POWER switch on the unit and then 
turn it “ON” again.
‹Notes
z
When the remote control unit (AJ-
RC10G) is connected, this item is not...

160Menu : Menu Description TablesThe ____ in the Adjustable Range column indicates the
preset mode. 
OPTION MODE
Items/
Data Saved Adjustable 
Range
 Remarks 
REC TALLYREDGREEN
CHARSelect the method for displaying the 
recording status of camera-recorder 
when controlling an external VTR by 
setting 1394 CONTROL items to BOTH.
Select the 1394 CONTROL item on the 
 screen in the SYSTEM 
SETTING page.
RED:The red tally lamp lights up. 
GREEN:The green tally lamp lights up. CHAR:The VF displays [REC] in...