Panasonic Memory Card Camera Recorder Ajhpx3000g Operating Instructions

131Manipulating Clips with Thumbnails : Properties
 Manipulating Clips with Thumbnails
From the thumbnail menu, select PROPERTY > CARD STATUS. The following screen appears.
When “REMAIN” is selected:
1.Write-protect Mark
The   mark appears if the P2 card is write-protected. 
2.P2 Card Status (remaining free space)
The remaining memory capacity of the P2 card is
indicated by a bar graph and percentage. The bar
graph indicator moves to the left as the remaining free
space decreases.
The following...

132Manipulating Clips with Thumbnails : Properties The status display enables a confirmation of the SD
memory card formatted condition, available memory
capacity etc.
From the thumbnail menu, select PROPERTY 
>
DEVICES > SD CARD.
If the format is compatible with SD standards, the message
“SD STANDARD: SUPPORTED” is displayed.
If the format is not compatible with SD standards, the
message “SD STANDARD: NOT SUPPORTED” is
displayed. If this is the case, writing or reading will not be
successful. Format the...

133Connection with external device : Connection through the DVCPRO connector
 Connection with external device
1Refer to [32.DVCPRO connector] (page 22) to 
connect the 1394 cable (DV cable).
Ensure that the signal format of the target device 
agrees with that of the camera-recorder.
2Open the  on the SYSTEM 
SETTING page and confirm that the settings in the 
1394 IN CH item and the 1394 OUT CH item are set 
to “AUTO”.
3Open  on the SYSTEM SETTING 
page to set REC MODE to “DVCPRO HD.”
4In case of input...

134Connection with external device : Connection through the DVCPRO connector The DVCPRO connector can be connected with an exter-
nal device for recording backup copies to control the start
and stop of recording.
1When connecting the 1394 (DV) cable, see 
[32.DVCPRO connector] (page 22).
Set the 1394 CONTROL menu option on the 1394 
SETTING screen on the SYSTEM SETTING page to 
BOTH.
2Through the 1394 CMD SEL menu option, select the 
type of stop recording command to be received by the 
external device....

135Connection with external device : Connection with external devices using the USB 2.0 port
 Connection with external device
By connecting AJ-HPX3000 with an external PC using USB 2.0, the P2 card connected to AJ-HPX3000 can be used as a 
mass storage device.
1Connect the USB cable to the USB 2.0 port.
‹Notes
zThe USB 2.0 cable is not included with the camera-
recorder. Please use a commercially available USB
2.0 cable (shield with a ferrite core).
zIt is recommended that the USB cable which is 
within...

136Connection with external device : Connection with external devices using the USB 2.0 port
In this mode, it is possible to connect to a hard disc drive (HDD), store card data (EXPORT: Refer to Writing data on a hard 
disc drive (page 139)
), view thumbnails of stored clips (EXPLORE: Refer to Viewing hard disc drive information (page 
137)
), and write data back to P2 cards (IMPORT: Refer to Writing data back to P2 cards (page 139)). 
1By navigating the menu, set the PC MODE SELECT 
menu option on the...

137Connection with external device : Connection with external devices using the USB 2.0 port
 Connection with external device
You can view the information on the hard disc drive
connected via USB 2.0 with the following steps. 
1Switch the mode to USB HOST. For more infor mation, 
see [Switching to the USB HOST mode] (page 136).
2Connect the hard disc drive to the camera-recorder 
via USB 2.0.
3Press the thumbnail button to display the thumbnail 
screen.
4Press the MENU button and select HDD > 
EXPLORE...

138Connection with external device : Connection with external devices using the USB 2.0 port
8.MODEL
This section indicates the model of the P2 card that
originally contained data on the partition.
‹Note
Press the cursor button (!) to switch to the PARTITION
NAME. Press the ["] button to return to the original
model name display.
Enter the PARTITION NAME from the software
keyboard by selecting [CHANGE PARTITION NAME]
in the OPERATION MENU while the thumbnail of the
hard disk drive is displayed. (Max....

139Connection with external device : Connection with external devices using the USB 2.0 port
 Connection with external device
1Switch the mode to USB HOST. For more infor mation, 
see [Switching to the USB HOST mode] (page 136).
2Connect a hard disc drive via USB.
A hard disc drive that has not been formatted with the 
camera-recorder must be formatted as directed in 
[
Formatting a hard disc drive].
3Insert a P2 card.
4Press the thumbnail button to display the thumbnail 
screen.
5Press the MENU button...

140Connection with external device : Connection with external devices using the USB 2.0 port
7When the writing is completed, the message “COPY 
COMPLETED!” is displayed.
‹Note
If a clip is written back to a P2 card different from the
original card that contained that clip, then the clip may be
incomplete. If this is the case, reconnect the clip. For more
information, see [Reconnection of Incomplete Clips] (page
122).
zA hard disc drive must be used under the following
conditions:
ŠIt must meet the...