Panasonic Memory Card Camera Recorder Ajhpx3000g Operating Instructions

111PreparationConnection of the remote control unit (AJ-RC10G)
 Preparation
It is possible to control some of the functions remotely by
connecting the remote control unit AJ-RC10G (optional
accessory).
When AJ-RC10G is connected to the REMOTE connector
on the unit and the power switches of both of the unit and
AJ-RC10G are turned on, the unit automatically enters the
remote control mode.
The remote control mode is released when AJ-RC10G is
removed or the power for the AJ-RC10G is turned OFF.
In the...

112PreparationConnection of the external switch
It is possible to draw 1.5 A current from the DC OUT
connector of the unit.
REC start/stop can be controlled by connecting an external
switch to this connector.
Since a tally lamp can be used by connecting an LED to
this connector, it is useful for shooting video when fixing
the camera on a crane.
1: GND
2: TALLY OUT
Open collector output on the unit side
TA L LY  O N
Low impedance
TA L LY  O F FHigh impedance
3: REC start/stop switch
This is...

113Manipulating Clips with Thumbnails : Thumbnail Manipulations Overview
 Manipulating Clips with Thumbnails
A clip is a data group that includes the images and voices
created from one shooting session, together with
additional information such as text memos and meta data. 
The following manipulations can be performed using the
cursor and SET buttons, while checking the images
displayed on the LCD monitor: zPlayback, delete, copy or restore the clip.
zAdd or delete a shot mark and a text memo on the...

114Manipulating Clips with Thumbnails : Thumbnail Screen Press the THUMBNAIL button to display the thumbnail
screen on the LCD monitor. Pressing the THUMBNAIL
button again returns the display to the regular display.
When switching is done from the regular screen display to
the thumbnail screen display, all the clips will be displayed
on the thumbnail screen.
Pressing the MENU button allows you to navigate the
thumbnail menu.
‹Note
With the TCG switch positioned at [SET], when the time
code or user bits...

115Manipulating Clips with Thumbnails : Thumbnail Screen
 Manipulating Clips with Thumbnails
4.Recording mode
The recording mode for the clip on which the pointer is
located is indicated.
5.System format
The format for the clip on which the pointer is located
is indicated.
6.Duration
The duration of the clip on which the pointer is located
is indicated.
7.USB HOST mode indicator
Indicated when the mode has been switched to USB
HOST.
8.Clip Number
The numbers set by the camera for all the clips
recognised...

116Manipulating Clips with Thumbnails : Selecting Thumbnails Multiple thumbnails can be randomly selected in the
thumbnail screen. 
1Use the cursor buttons to move the pointer (yellow 
frame) to the desired clip and press the SET button. 
The frame around the selected thumbnail changes to 
a blue frame. Press the SET button again to deselect 
the clip. 
2Additional clips can be selected by repeating Step 1. 
It is possible to display only the selected thumbnails in the
thumbnail screen for playback....

117Manipulating Clips with Thumbnails : Switching the Thumbnail Display
 Manipulating Clips with Thumbnails
The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail 
screen. 
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Press the THUMBNAIL MENU button. The thumbnail 
menu appears. 
3Select THUMBNAIL from the thumbnail menu. Switch 
the thumbnail display by selecting one of the following 
items: 
ALL CLIP:...

118Manipulating Clips with Thumbnails : Switching the Thumbnail Display It is possible to replace thumbnails with images that
include previously attached text memos while images are
recorded or played back.
1Add text memos to images that you intend to change. 
Refer to [Text Memo Function] (page 41) for the 
method to add text memos.
2Select THUMBNAIL > TEXT MEMO CLIPS to display 
thumbnails of the clips with text memos.
3Place the pointer on the clip of the thumbnail that you 
intend to change, and then...

119Manipulating Clips with Thumbnails : Shot Mark
 Manipulating Clips with Thumbnails
A shot mark can be added to a clip thumbnail to distinguish this clip from the others.
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Use the cursor buttons to move the pointer over the 
clip to which you want to attach a shot mark. 
3Press the Shot Mark button. 
4A shot mark will be attached to the clip thumbnail 
under the pointer. 
To delete a shot mark, reposition the pointer over...

120Manipulating Clips with Thumbnails : Text Memo
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Press the THUMBNAIL MENU button and select 
THUMBNAIL 
> TEXT MEMO CLIPS from the 
thumbnail menu.
The clip thumbnails with text memos attached are 
displayed in the upper section of the LCD monitor. 
The lower section of the LCD monitor shows 
information about the text memo on the clip selected 
by the pointer. 
3Move the pointer over the clip that contains the 
desired...