Panasonic Memory Card Camera Recorder Ajhpx3000g Operating Instructions

71Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
Information Item Indication Status
10. MODE CHECK 
Indication Area
(STATUS:
 Master gain, 
 USER SW GAIN)LOW/MID/HIGH
–3 to 30
S.GAIN 30/36
DS.GAIN 6
:/10:/12:/
15:/20:
Value set for the master gain
Example: LOW: 0
Gain value to which S.GAIN and DS.GAIN are assigned
(Cause of !LED 
illumination: displayed 
full-screen)
zIndications selected 
through the menu option 
!LED are marked with 
[...

72Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Information Item Indication Status
11. Camera Warning and 
Report Area 
(related to AWB, ABB 
and switch settings)AWB A ACTIVE
AWB B ACTIVE
AWB A OK 
¢.¢K
AWB B OK 
¢.¢K
AWB BREAK ¢.¢K
AW B  N G
COLOR TEMP LOW
COLOR TEMP HIGH
LEVEL OVER
LOW LIGHT
TIME OVER
AT W  M O D E
AWB PRESET  
¢.¢K
CHECK FILTER
ABB ACTIVE
ABB OK
ABB BREAK
ABB NG
B-SHD READY
B-SHD ACTIVE
B-SHD OK
B-SHD BREAK
B-SHD NGAWB being performed on Ch A.
AWB being...

73Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
Information Item Indication Status
13. System information 
and warningsSYSTEM ERROR-¢¢
TURN POWER OFF
CARD ERR 
¢
REC WARNING
BACKUP BATT EMPTY
FA N  S TO P
WIRELESS-RF
EOM
BOS
EOS
CANNOT REC
CANNOT PLAY
COMM ERROR
TEXT MEMO
TEXT MEMO INVALID
MARK ON/OFF
SHOT MARK INVALID
UPDATING
USB DEVICE
USB HOST
THUMBNAIL OPEN
1394 INITIAL ERROR
PROXY REC P2&SD
PROXY REC P2
NEAR END (SD)
EOM (SD)...

74Adjustments and Settings for Recording : Viewfinder Screen Status Displays
17. Color temperature¢.¢K Color temperature assigned to A, B, and PRST of the WHITE BAL switch 
(this is a value stored at AWB performance or a value set through the menu 
option). The indication is not provided in ATW mode.
18. Filter position1 - 4
A - D
–This indicates the position of the ND filter.
This indicates the position of the CC filter.
This indicates that the filter has not been set to a proper position.
19. Dynamic...

75Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
*1 The menu option P2CARD REMAIN can be found in the  screen, which is accessible from the VF 
page.
*2 If the remaining free space or memory capacity is 999 min or more, “999min” is displayed. P2 Card Remaining Free Space/capacity Indication
Status of 
unitRecording 
statusMenu option
P2 CARD REMAIN*15.P2 card remaining free space 
indication*26.P2 card remaining free space 
indication...

76Adjustments and Settings for Recording : Viewfinder Screen Status Displays
*1±: Not provided when the menu option STATUS is set to OFF, which can be found in the  screen, accessible from 
the VF page.
z: Provided regardless of the menu option setting.
Indications Available in the Viewfinder Screen 
Selectable 
between on and 
off through menu 
options Provided when 
the appropriate 
status is 
encountered.Provided during 
MODE CHECK*
1SelectableProvided during 
playback
1. System mode
–Ô–
2....

77Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
The messages that appear on the viewfinder screen to
indicate changes to settings and adjustment results may
be limited, or set not to appear, through the menu option
DISP MODE. This menu option can be found in the  screen, which is accessible from the VF page. 
For directions on navigating the menu, see [Setting Menu
Options] (page 157).
z: Message appears.±: Message does not appear....

78Adjustments and Settings for Recording : Viewfinder Screen Status Displays
The center, safety zone, safety zone area and frame
markers may be set to ON or OFF, along with
specifications of the marker types. To set and select
markers, go to the VF MARKER screen from the VF page
and select the appropriate options.
For directions on navigating the menu, see [Setting Menu
Options] (page 157).‹Note
The indication MKR:A at the upper right of the screen
shows the current indication status. To view TABLE B,...

79Adjustments and Settings for Recording : Adjusting and setting the LCD monitor
 Adjustments and Settings for Recording
1Turn on the POWER switch of the unit.
2Slide the OPEN button in the arrow  1 direction to 
open the LCD monitor in the arrow  
2 direction.
3Adjust the angle of the LCD monitor for most 
convenient viewing.
The monitor can turn up to 180 degrees towards the 
lens and up to 90 degrees towards you. 
‹Note
To prevent camera-recorder failure, do not allow 
undue force to be applied to the...

80Adjustments and Settings for Recording : Selection of video output signals
The unit employs the VIDEO OUT connector and the MON OUT connector as connectors for outputting video signals.
The signal modes for outputting signals from the VIDEO
OUT connector are switched with the VIDEO OUT switch.
HD SDI:
To output the HD SDI signals. When the camera-
recorder is set to the SD mode, SD-SDI signals are
output.
SD SDI:
To output the SD SDI signals. (Signals are down-
converted in HD mode.)
VBS:
To output the...