Panasonic Memory Card Camera Recorder Ajhpx2700 Operating Instructions

							191Menu: Menu Description Tables
Menu
yThe remaining battery level is indicated in percentage 
when a battery with this function is installed on the unit.
Items/
Data SavedAdjustable 
RangeRemarks
ENDURA10
						

							192Menu: Menu Description Tables

						

							193Menu: Menu Description Tables
Menu
MIC/AUDIO2
Items/
Data SavedAdjustable 
RangeRemarks
FRONT MIC 
POWERONOFFSelect the phantom power supply for the 
front microphone.
–CUF –
REAR MIC 
POWERONOFFSelect the phantom power supply for the 
rear microphone.
When “OFF” is selected, no phantom 
power is supplied even if the LINE/MIC/
+48V selector switch is set to [+48V].
–CUF –
MONITOR 
SELECTSTEREOMIXWhen the MONITOR select switch is set 
to [ST] (stereo), select the signal format 
for the monitor output.
–CUF –
FRONT MIC 
LEVEL–40dB–50dBSelect the front microphone input level.
–CUF –
REAR MIC CH1 
LV L–50dB
–60dBSelect the rear microphone input level.
–CUF –
REAR MIC CH2 
LV L–50dB
–60dBSelect the rear microphone input level.
–CUF –
REAR LINE IN 
LV L–3dB
0dB
+4dBSelect the rear line input level.
–CUF –
AUDIO OUT LVL –3dB
0dB
+4dBSelect the audio output level.
–CUF –
HEADROOM 18dB
20dBSet the headroom (standard level).
–CUF –
WIRELESS 
WAR NON
OFFSelect whether or not to enable the 
alarm to trigger for poor wireless receiver 
reception.
–CUF –
WIRELESS 
TYPESINGLEDUALSelect the type of wireless receiver.
SINGLE:
Select a single channel wireless 
receiver.
DUAL:Select a 2-channel wireless 
receiver.
–CUF –
TC/UB
Items/
Data SavedAdjustable 
RangeRemarks
TC MODE DFNDFSet the time code mode.
DF:Drop frame.
NDF:Non drop frame.

						

							194Menu: Menu Description Tables

						

							195Menu: Menu Description Tables
Menu
The ____ in the Adjustable Range column indicates the preset mode.

						

							196Menu: Menu Description TablesFILE READ screen
CAC FILE CARD READ
Items/
Data SavedAdjustable 
RangeRemarks
CARD FILE 
SELECT01:
32For selecting the number of the 
chromatic aberration correction file on 
the SD memory card that will be read or 
deleted.
–––F–
READFor reading CAC file from the SD 
memory card. When selected, the 
following FILE READ screen appears.
–––––
DELETEFor deleting a CAC file from the SD 
memory card.
–––––
TITLE READFor reading the name of a CAC file on 
the SD memory card.
–––––
TITLE SCROLL 01:
25For scrolling through the CAC files on 
the SD memory card. Select this option 
using the cursor. Press the jog dial 
button, and then turn the jog dial button 
to scroll through the CAC files.
–––––
01: - 32:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
Items/
Data SavedAdjustable 
RangeRemarks
TITLEFor displaying the name of a CAC file set 
using READ from the  screen.
YESFor storing a CAC file read from the SD 
memory card to the internal memory of 
the unit.
NO (CANCEL)For canceling storage of a CAC file read 
from the SD memory card to the internal 
memory of the unit.
MEM STORE 
NO.EMPTY01
:
32EMPTY:
For searching through the 
internal memory of the unit in 
numerical order when storing 
data and only stores data in free 
locations.
01 - 32:
For storing data at selected 
number. When a CAC file 
already exists at the selected 
number, it is overwritten.
TITLE SCROLL 01
:
25For scrolling through the CAC files in the 
internal memory of the unit. Select this 
option using the cursor. Press the jog 
dial button, and then turn the jog dial 
button to scroll through the CAC files.
01 - 32For displaying up to 32 file names, each 
up to 27 characters in length.
AJ-HPX2700G-VQT1V27_eng.book  196 ページ  ２００８年９月２日　火曜日　午後５時４３分 
						

							197Menu: Menu Description Tables
Menu

						

							198Menu: Menu Description Tables The ____ in the Adjustable Range column indicates the preset mode.
yData adjusted on the  screen can be 
stored on an SD memory card as a lens file.
MAINTENANCE
LENS ADJ
Items/
Data SavedAdjustable 
RangeRemarks
F2.8 ADJ ON
OFFThe iris is only set to F2.8 when this item 
set to “ON”. (Adjustment to F2.8 will be 
executed on the lens)
–––––
F16 ADJ ON
OFFThe iris is only set to F16 when this item 
set to “ON”. (Adjustment to F16 will be 
executed on the lens)
–––––
BLACK SHADING
Items/
Data SavedAdjustable 
RangeRemarks
CORRECT ONOFFOn/off switching for digital black shading 
compensation.
–CUFR
DETECTION 
(DIG)–Execute digital black shading 
compensation.
–––––
WHITE SHADING
Items/
Data SavedAdjustable 
RangeRemarks
CORRECT ONOFFOn/off switching for white shading 
compensation.
–CUFR
R H SAW
R H PARA
R V SAW
R V PARA
G H SAW
G H PARA
G V SAW
G V PARA
B H SAW
B H PARA
B V SAW
B V PARA–255
:
+000
:
+255
For executing the white shading 
compensation manually.
The sawteeth-shaped waveform and the 
parabola waveform of the respective 
RGB channels are adjusted in the 
horizontal direction and the vertical 
direction.
–––F–
LENS FILE ADJ
Items/
Data SavedAdjustable 
RangeRemarks
RB GAIN CTRL 
RESETON
OFFON:The gains of Rch and Bch 
adjusted in  screen are reset.
Furthermore, the flare levels of 
Rch, Gch and Bch that are 
adjusted on  screen are reset.
OFF:The gains of Rch and Bch 
adjusted in  screen are enabled.
Furthermore, the flare levels of 
Rch, Gch and Bch that are 
adjusted on  screen are enabled.
–––F–
LENS R GAIN 
OFFSET–200
:
+000
:
+200
For compensating Rch sensitivity of the 
lens used.
–––F–
LENS B GAIN 
OFFSET–200
:
+000
:
+200
For compensating Bch sensitivity of the 
lens used.
–––F–
LENS R FLARE 000
:
100For adjusting the flare level of Rch.
–––F–
LENS G FLARE 000
:
100For adjusting the flare level of Gch.
–––F–
LENS B FLARE 000
:
100For adjusting the flare level of Bch.
–––F–
AJ-HPX2700G-VQT1V27_eng.book  198 ページ  ２００８年９月２日　火曜日　午後５時４３分 
						

							199Menu: Menu Description Tables
Menu
CAC ADJ
Items/
Data SavedAdjustable 
RangeRemarks
CAC CONTROL ONOFFON:Enable chromatic aberration 
correction
OFF:Disable chromatic aberration 
correction
––UFR
CAC FILE  
DELETE–Deletes the CAC file stored in the 
internal memory of the unit, and selected 
using CAC FILE NO.
–––––
CAC FILE NO. 01:
32Selects a CAC file when manual 
correction is in use. Also, selects CAC 
file for deletion when deleting CAC files 
using CAC FILE  DELETE.
–––F–
TITLE SCROLL 01:
25Scrolls through CAC files. Select this 
option using the cursor. Press the jog 
dial button, and then turn the jog dial 
button to scroll through the CAC files.
–––F–
01:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
02:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
03:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
04:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
05:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
06:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
07:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
08:For displaying up to 32 file names, each 
up to 27 characters in length.
–––––
DIAGNOSTIC1
Items/
Data SavedAdjustable 
RangeRemarks
CAMSOFT MAINDisplays the version of the main software 
for the camera microprocessor.
–––––
CAM TABLEDisplays the version of the camera block 
settings table.
–––––
PULSE FPGADisplays the version of the program for 
driving the CCD.
–––––
UCIF FPGADisplays the version of the program for 
the microprocessor interface FPGA.
–––––
FM FPGADisplays the version of the program for 
the frame memory control FPGA.
–––––
CHAR FPGADisplays the version of the program for 
the HD signal I/O control FPGA.
–––––
DC FPGADisplays the version of the program for 
the SD signal I/O control FPGA.
–––––
DIAGNOSTIC2
Items/
Data SavedAdjustable 
RangeRemarks
SYSCON SOFTDisplay the software version for the 
system control microprocessor.
–––––
LCD SOFTDisplay the software version for the LCD 
microprocessor.
–––––
P2CS OSDisplay the OS version for the streaming 
controller.
–––––
P2CS APDisplay the application version for the 
streaming controller.
–––––
SH4CTRL FPGADisplay the program version for the 
streaming control FPGA.
–––––
PRCCTRL FPGADisplays the version of the program for 
the PRE RECORDING control FPGA.
–––––
SYSIF FPGADisplay the program version for the 
serial interface FPGA.
–––––
AV C - I  S O F TDisplay the control software version of 
the AVC-I board.
–––––
AV C - I  F P G ADisplay the FPGA program version of 
the AVC-I board.
–––––
HOURS METER
Items/
Data SavedAdjustable 
RangeRemarks
OPERATIONDisplay total hours the camera power 
has been turned on.
–––––
P. O N  T I M E SDisplay total number of times the 
POWER switch has been turned on.
–––––Items/
Data SavedAdjustable 
RangeRemarks
AJ-HPX2700G-VQT1V27_eng.book  199 ページ  ２００８年９月２日　火曜日　午後５時４３分 
						

							200Menu: Menu Description Tables The ____ in the Adjustable Range column indicates the preset mode.
OPTION MENU
OPTION
Items/
Data SavedAdjustable 
RangeRemarks
ENG SECURITY ON
OFFSelect whether or not to prohibit opening 
the menu screen.
ON:Menu screen cannot be opened. 
Please consult your distributor to 
release the setting.
OFF:Menu screen can be opened.
–––––
FRAME RATE 
UBFRM RATEMENUFor setting the user bits to record when 
the video system is set to 24P or 24PA, 
or when the recording format is set to 
720P. For details, refer to [Recording 
time code and user bits] (page 61).
FRM RATE:
For recording the shooting 
information (frame rate etc.) of 
the camera.
MENU:This follows the settings in the 
UB MODE item and the VITC UB 
MODE item of  screen. 
However, the camera shooting 
information is always recorded 
when recording in native mode.
–C–––
1394 CONFIG DFLT(000)001
:
255This is the menu for expanding the 
DVCPRO connector.
Use with “DFLT” in normal operation.
–C–––
1394 GAP 
COUNT0
:
40
:
63
For setting the interval between packets.
–C–––
AUDIO OUT 
DELAYDELAYED
THROUGHSelect whether or not to delay audio, 
headphone and speaker outputs.
DELAYED:
Delay audio output in 
synchronization with video 
output.
THROUGH:
Output audio input without delay. 
This setting prevents echo effect 
between the sound source and 
audio output when the sound 
source is near the unit.
–C–––
FAN M OD E OFF
AUTOFor setting the operation mode of the fan
OFF:The fan always stops.
AUTO:The fan will run automatically 
when the temperature in the unit 
increases.