Panasonic Memory Card Camera Recorder Ajhpx2700 Operating Instructions

							121Manipulating Clips with Thumbnails: Thumbnail Screen
Manipulating Clips with Thumbnails
Press the THUMBNAIL button to display the thumbnail 
screen on the LCD monitor. Pressing the THUMBNAIL 
button again returns the display to the regular display. When 
switching is done from the regular screen display to the 
thumbnail screen display, all the clips will be displayed on 
the thumbnail screen.
Pressing the THUMBNAIL MENU button allows you to 
navigate the thumbnail menu.

						

							122Manipulating Clips with Thumbnails: Thumbnail Screen
4. Recording mode
The recording mode for the clip on which the pointer is 
located is indicated.
5. System mode
The format for the clip on which the pointer is located is 
indicated.
6. Duration
The duration of the clip on which the pointer is located is 
indicated.
7. USB HOST mode indicator
Indicated when the mode has been switched to USB 
HOST.
8. Clip Number
The numbers set by the camera for all the clips 
recognized correctly by the P2 card. These numbers are 
allocated in chronological order, by shooting dates and 
times.
If clips cannot be played because of different recording 
formats, they are displayed in red.
9.  Defective Clip Indicator and
 Unknown Clip indicator
This marker is displayed for defective clips, which may 
result from a variety of causes, e.g., powering-down 
during recording.
Clip with yellow defective clip indicators can be restored 
in some cases. Please refer to [Restoring Clips] 
(page 129) for more information.
A clip displayed with a red defective clip indicator cannot 
be restored and must be deleted. If the clip cannot be 
deleted, format the P2 card.
 is displayed for clips such as those which differ in 
format from the P2 standard.
10.  Incomplete Clip Indicator
Indicates that although a clip is recorded across multiple 
P2 cards, one of these cards is not inserted into a P2 
card slot.
11.  Shot Mark Indicator
This marker is displayed for a clip with a shot mark 
attached. Please refer to [Shot Mark] (page 126) for 
more information about shot marks.
12.  Indicator for clips with proxy
This marker is displayed for clips with proxy attached.
13.  Text Memo Indicator
This marker is displayed for a clip with a text memo 
attached.
14.  Edit Copied Clip Indicator
In models which support edit copying, such as the AJ-
HPM110, this marker is displayed on clips which have 
undergone edit copying. For more information about edit 
copying, see the instruction manual for a model that 
supports edit copying.
15.  Wide Clip Indicator
This marker is displayed for clips recorded with the 16:9 
aspect ratio. However, it does not accompany clips in 
HD format.
AJ-HPX2700G-VQT1V27_eng.book  122 ページ  ２００８年９月２日　火曜日　午後５時４３分 
						

							123Manipulating Clips with Thumbnails: Selecting Thumbnails
Manipulating Clips with Thumbnails
Multiple thumbnails can be randomly selected in the 
thumbnail screen.
1Use the cursor buttons to move the pointer (yellow 
frame) to the desired clip and press the SET button.
The frame around the selected thumbnail changes to a 
blue frame. Press the SET button again to deselect the 
clip.
2Additional clips can be selected by repeating step 1.It is possible to display only the selected thumbnails in the 
thumbnail screen for playback. Please refer to [Switching the 
Thumbnail Display] (page 124) for more information.
a.LCD monitor
b.THUMBNAIL button
c.EXIT button
d. cursor buttons
 SET button
e.THUMBNAIL MENU button
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer over the 
desired clip.
3Press the PLAY/PAUSE button, and the clip under the 
pointer will be played back on the LCD monitor.
After playback of the clip under the pointer, subsequent 
clips are played back in order, according to when they 
were shot. The thumbnail screen returns after the last 
clip has been played back.

						

							124Manipulating Clips with Thumbnails: Switching the Thumbnail Display The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button. The thumbnail 
menu appears.
a.THUMBNAIL MENU button
3Select THUMBNAIL from the thumbnail menu. Switch 
the thumbnail display by selecting one of the following 
items:
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips of the current system format.
SELECTED CLIPS:
Display randomly selected clips.
MARKED CLIPS:
Display clips with shot marks attached.
TEXT MEMO CLIPS:
Display clips with text memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted 
in the specified slot.
When this item is selected, “SLOT1” to 
“SLOT5” are displayed as a sub-menu. Select 
the desired slot to display the clips.
SETUP:Please refer to [Setting the Thumbnail Display 
Mode] (page 136) for information about this 
item.
EXIT:Close the sub-menu.
Switching the Thumbnail Display
a
AJ-HPX2700G-VQT1V27_eng.book  124 ページ  ２００８年９月２日　火曜日　午後５時４３分 
						

							125Manipulating Clips with Thumbnails: Switching the Thumbnail Display
Manipulating Clips with Thumbnails
It is possible to replace thumbnails with images that include 
previously attached text memos while images are recorded 
or played back.
1Add text memos to images that you intend to change. 
Refer to [Text Memo Function] (page 44) for the method 
to add text memos.
2Select THUMBNAIL  TEXT MEMO CLIPS to display 
thumbnails of the clips with text memos.
3Place the pointer on the clip of the thumbnail that you 
intend to change, and then press SET button. Move the 
pointer to the text memo display on the lower row.
4Select the thumbnail that you intend to replace, place 
the pointer on it, and then select OPERATION  EXCH. 
THUMBNAIL on the thumbnail menu.
5Press SET button. When the YES/NO confirmation 
window is displayed, select YES by using the cursor 
button and the SET button. The menu closes and the 
thumbnail for the clip is replaced.

						

							126Manipulating Clips with Thumbnails: Shot Mark A shot mark can be added to a clip thumbnail to distinguish this clip from the others.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer over the clip 
to which you want to attach a shot mark.
3Press the SHOT MARKER button.
4A shot mark will be attached to the clip thumbnail under 
the pointer.
To delete a shot mark, reposition the pointer over the 
clip and press the SHOT MARKER button.

						

							127Manipulating Clips with Thumbnails: Text Memo
Manipulating Clips with Thumbnails
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button and select 
THUMBNAIL  TEXT MEMO CLIPS from the thumbnail 
menu.
The clip thumbnails with text memos attached are 
displayed in the upper section of the LCD monitor. The 
lower section of the LCD monitor shows information 
about the text memo on the clip selected by the pointer.
a.Thumbnail display
b.Shows the total number of text memos attached to the 
clip.
c.Shows the still image that the text memo is related to.
3Move the pointer over the clip that contains the desired 
text memo to playback and press the SET button.
The pointer moves to the lower part of the LCD monitor.
d.The pointer moves down.
4With the pointer located in the lower part, move the 
pointer to the desired text memo number using the 
cursor right and left buttons (YZ). Then, press the 
PLAY/PAUSE button.
5Playback will start from the time code position of the text 
memo where the pointer is located. 
If the STOP button is pressed during playback or the 
playback has finished at the end of the clip, then the 
thumbnail screen appears again with the pointer 
replaced with the text memo where the playback 
started.
6Press the THUMBNAIL MENU button to select EXIT or 
press the EXIT button to return the pointer to the upper 
part of the thumbnail screen.

						

							128Manipulating Clips with Thumbnails: Deleting Clips
1Select a desired text memo in a clip by carrying out 
steps 1-3 for [Playing back a clip at the position where a 
text memo is recorded] (page 127).
2Move the pointer to the desired text memo, and then 
press the SET button. You can select more than one text 
memo.
3Press the THUMBNAIL MENU button to select 
OPERATION  COPY.
4Use the cursor buttons and SET buttons to select the 
destination slot. Then, select YES to start copying the 
clip. The portion between the selected text memo and 
the next one is copied. If no text memo is found after the 
selected one, then all part after the selected text memo 
is copied. If multiple text memos are selected, the 
selected sections are copied.
5When the clip is being copied, the unit indicates the 
progress of the copy process and cancellation status. To 
discontinue the copy process, press the SET button. 
Then, a YES/NO confirmation screen is displayed. Use 
the cursor buttons and SET button to select YES.

						

							129Manipulating Clips with Thumbnails: Restoring Clips
Manipulating Clips with Thumbnails
Restores clips that are defective as a result of sudden 
powering-down during recording, or removal of the P2 card 
being accessed.

						

							130Manipulating Clips with Thumbnails: Copying Clips Selected clips can be copied to the P2 card in the desired 
slot or SD memory card.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer to the 
desired clip and press the SET button.
3Press the THUMBNAIL MENU button and select 
OPERATION  COPY from the thumbnail menu.
Select slot 1-5 or SD memory card as the destination.
4The confirmation window appears. Use the cursor 
buttons and SET button to select YES.