Panasonic Memory Card Camera Recorder Ajhpx2700 Operating Instructions

							171Menu: Menu Description Tables
Menu
The ____ in the Adjustable Range column indicates the preset mode.
* If the remote control unit is connected, settings made from the 
menu are disabled. (The set value is displayed.)
PA I N T
RB GAIN CONTROL
Items/
Data SavedAdjustable 
RangeRemarks
R GAIN AWB 
PRE*–200
:
+000
:
+200
For setting the Rch gain when the 
WHITE BAL switch is in the [PRST] 
position.
SCUFR
B GAIN AWB 
PRE*–200
:
+000
:
+200
For setting the Bch gain when the 
WHITE BAL switch is in the [PRST] 
position.
SCUFR
R GAIN AWB A* –200
:
+000
:
+200
For setting the Rch gain when the 
WHITE BAL switch is in the [A] position.
SCUFR
B GAIN AWB A* –200
:
+000
:
+200
For setting the Bch gain when the 
WHITE BAL switch is in the [A] position.
SCUFR
R GAIN AWB B* –200
:
+000
:
+200
For setting the Rch gain when the 
WHITE BAL switch is in the [B] position.
SCUFR
B GAIN AWB B* –200
:
+000
:
+200
For setting the Bch gain when the 
WHITE BAL switch is in the [B] position.
SCUFR
AWB A GAIN 
OFFSET*ON
OFFFor setting the values of the Rch gain 
and the Bch gain when the auto white 
balance is executed as the WHITE BAL 
switch is in the [A] position.
ON:To retain the values set in the 
items of R GAIN AWB A and B 
GAIN AWB A
OFF:The values of the Rch gain and 
the Bch gain is set to “0”.
SCUFR
AWB B GAIN 
OFFSET*ON
OFFFor setting the values of the Rch gain 
and the Bch gain when the auto white 
balance is executed as the WHITE BAL 
switch is in the [B] position.
ON:To retain the values set in the 
items of R GAIN AWB B and B 
GAIN AWB B
OFF:The values of the Rch gain and 
the Bch gain is set to “0”.
SCUFR
RGB BLACK CONTROL
Items/
Data SavedAdjustable 
RangeRemarks
MASTER PED* –200
:
+000
:
+200
For setting the level of the master 
pedestal.
SCUFR
R PEDESTAL* –100
:
+000
:
+100
For setting the pedestal level of the Rch.
SCUFR
G PEDESTAL* –100
:
+000
:
+100
For setting the pedestal level of the Gch.
SCUFR
B PEDESTAL* –100
:
+000
:
+100
For setting the pedestal level of the Bch.
SCUFR
PEDESTAL 
OFFSET*ON
OFFFor setting the pedestal levels of the 
Rch, the Gch and the Bch when the auto 
black balance is adjusted.
ON:To retain the values set in the 
respective items of R 
PEDESTAL, G PEDESTAL, and 
B PEDESTAL
OFF:The pedestal levels of the Rch, 
the Gch and the Bch are set to 
“0”.
SCUF –
R FLARE* –100
:
+000
:
+100
For adjusting the flare level of the Rch. 
Adjustment values in this item are added 
to the flare adjustment value that is 
adjusted on  screen.
SCUFR
G FLARE* –100
:
+000
:
+100
For adjusting the flare level of the Gch. 
Adjustment values in this item are added 
to the flare adjustment value that is 
adjusted on  screen.
SCUFR
B FLARE* –100
:
+000
:
+100
For adjusting the flare level of the Bch. 
Adjustment values in this item are added 
to the flare adjustment value that is 
adjusted on  screen.
SCUFR
AJ-HPX2700G-VQT1V27_eng.book  171 ページ  ２００８年９月２日　火曜日　午後５時４３分 
						

							172Menu: Menu Description Tables

						

							173Menu: Menu Description Tables
Menu

						

							174Menu: Menu Description Tables yWhen shooting with the MASTER GAIN set to “–3dB”, 
coloring phenomena may occur in portions of the video 
with high brightness.
The coloring phenomena can be reduced by switching the 
OUTPUT/AUTO KNEE switch to [CAM/AUTO KNEE 
OFF], setting the MANUAL KNEE menu option of the 
 screen to “ON”, and then changing the 
following menu options.
– When “HD”, “SD”, “FILMLIKE1”, “FILMLIKE2” or 
“FILMLIKE3” has been selected in the GAMMA MODE 
SEL menu option of the  screen, reduce the 
value in the KNEE MASTER SLOPE menu option of the 
 screen.
– When “FILM-REC” has been selected in the GAMMA 
MODE SEL menu option of the  screen, 
reduce the value in the F-REC DYNAMIC LVL menu 
option of the  screen.
– When “VIDEO-REC” has been selected in the GAMMA 
MODE SEL menu option of the  screen, 
reduce the value in the V-REC KNEE SLOPE menu 
option of the  screen.
MID SETTING
Items/
Data SavedAdjustable 
RangeRemarks
„MASTER GAIN –3dB
:
3dB
:
30dB
Select the master gain from –3, 0, 3, 6, 
9, 12, 15, 18, 21, 24, 27, or 30 dB.
SCUF –
H.DTL LEVEL 00
:
05
:
63
For performing the horizontal detail 
correction level setting.
SCUF –
V.DTL LEVEL 00
:
07
:
31
For performing the vertical detail 
correction level setting.
SCUF –
DTL CORING 00
:
08
:
60
For performing the noise elimination 
level setting for detail.
SCUF –
H.DTL FREQ. 00
:
18
:
31
For performing the horizontal detail 
frequency selection.
SCUF –
LEVEL DEPEND. 0
1
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details 
of dark sections are compressed.
If the numerical value is larger, details of 
bright sections are also compressed.
SCUF –
MASTER 
GAMMA0.30
:
0.45
:
0.75
For setting the master gamma. (0.01 
step)
SCUF –
BLACK GAMMA –8
:
OFF
:
+8
For setting the gamma curve for the dark 
portion.
–8 to –1:
The dark portion is compressed.
OFF:Standard state
+1 to +8:
The dark portion is extended.
SCUF –
B.GAMMA 
RANGE12
3For setting the upper limit of 
compression/expansion.
1:Approximately 20%
2:Approximately 30%
3:Approximately 40%
SCUFR
„MATRIX 
TABLEOFF
A
B
For selecting the color correction table 
for the linear matrix.
SCUF –
„COLOR 
CORRECTON
OFFFor switching on/off of the 12-axis 
independent color correction.
SCUF –
AJ-HPX2700G-VQT1V27_eng.book  174 ページ  ２００８年９月２日　火曜日　午後５時４３分 
						

							175Menu: Menu Description Tables
Menu

						

							176Menu: Menu Description Tables
= SKIN TONE AREA

						

							177Menu: Menu Description Tables
Menu

						

							178Menu: Menu Description Tables yWhen the GAMMA MODE SEL item is used for 
FILMLIKE3, the following settings are recommended.
MANUAL KNEE: “ON”
KNEE MASTER POINT:“85.0%”
KNEE MASTER SLOPE:“50”
yAUTO KNEE is not performed when the GAMMA MODE 
SEL menu option is set to “FILM-REC” or “VIDEO-REC”.AUTO KNEE is not performed when AJ-RC10G is 
connected, but the LED of the AJ-RC10G button is lit by 
pressing the A.KNEE ON button.

						

							179Menu: Menu Description Tables
Menu
The ____ in the Adjustable Range column indicates the preset mode.
ZEBRA Pattern Display
VF
VF DISPLAY
Items/
Data SavedAdjustable 
RangeRemarks
STATUS MODE NORMALFILM RECFor selecting the status display mode of 
the viewfinder.
NORMAL:
Normal status display
FILM REC:
Status display for FILM REC

						

							180Menu: Menu Description Tables