Panasonic Memory Card Camera Recorder Ajhpx2700 Operating Instructions

121Manipulating Clips with Thumbnails: Thumbnail Screen
Manipulating Clips with Thumbnails
Press the THUMBNAIL button to display the thumbnail 
screen on the LCD monitor. Pressing the THUMBNAIL 
button again returns the display to the regular display. When 
switching is done from the regular screen display to the 
thumbnail screen display, all the clips will be displayed on 
the thumbnail screen.
Pressing the THUMBNAIL MENU button allows you to 
navigate the thumbnail menu.

122Manipulating Clips with Thumbnails: Thumbnail Screen
4. Recording mode
The recording mode for the clip on which the pointer is 
located is indicated.
5. System mode
The format for the clip on which the pointer is located is 
indicated.
6. Duration
The duration of the clip on which the pointer is located is 
indicated.
7. USB HOST mode indicator
Indicated when the mode has been switched to USB 
HOST.
8. Clip Number
The numbers set by the camera for all the clips 
recognized correctly by the P2 card....

123Manipulating Clips with Thumbnails: Selecting Thumbnails
Manipulating Clips with Thumbnails
Multiple thumbnails can be randomly selected in the 
thumbnail screen.
1Use the cursor buttons to move the pointer (yellow 
frame) to the desired clip and press the SET button.
The frame around the selected thumbnail changes to a 
blue frame. Press the SET button again to deselect the 
clip.
2Additional clips can be selected by repeating step 1.It is possible to display only the selected thumbnails in the...

124Manipulating Clips with Thumbnails: Switching the Thumbnail Display The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button. The thumbnail 
menu appears.
a.THUMBNAIL MENU button
3Select THUMBNAIL from the thumbnail menu. Switch 
the thumbnail display by selecting one of the following 
items:
ALL CLIP:
Display all clips....

125Manipulating Clips with Thumbnails: Switching the Thumbnail Display
Manipulating Clips with Thumbnails
It is possible to replace thumbnails with images that include 
previously attached text memos while images are recorded 
or played back.
1Add text memos to images that you intend to change. 
Refer to [Text Memo Function] (page 44) for the method 
to add text memos.
2Select THUMBNAIL  TEXT MEMO CLIPS to display 
thumbnails of the clips with text memos.
3Place the pointer on the clip of the thumbnail...

126Manipulating Clips with Thumbnails: Shot Mark A shot mark can be added to a clip thumbnail to distinguish this clip from the others.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer over the clip 
to which you want to attach a shot mark.
3Press the SHOT MARKER button.
4A shot mark will be attached to the clip thumbnail under 
the pointer.
To delete a shot mark, reposition the pointer over the 
clip and press the SHOT MARKER button.

127Manipulating Clips with Thumbnails: Text Memo
Manipulating Clips with Thumbnails
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button and select 
THUMBNAIL  TEXT MEMO CLIPS from the thumbnail 
menu.
The clip thumbnails with text memos attached are 
displayed in the upper section of the LCD monitor. The 
lower section of the LCD monitor shows information 
about the text memo on the clip selected by the pointer.
a.Thumbnail display
b.Shows the...

128Manipulating Clips with Thumbnails: Deleting Clips
1Select a desired text memo in a clip by carrying out 
steps 1-3 for [Playing back a clip at the position where a 
text memo is recorded] (page 127).
2Move the pointer to the desired text memo, and then 
press the SET button. You can select more than one text 
memo.
3Press the THUMBNAIL MENU button to select 
OPERATION  COPY.
4Use the cursor buttons and SET buttons to select the 
destination slot. Then, select YES to start copying the 
clip. The...

129Manipulating Clips with Thumbnails: Restoring Clips
Manipulating Clips with Thumbnails
Restores clips that are defective as a result of sudden 
powering-down during recording, or removal of the P2 card 
being accessed.

130Manipulating Clips with Thumbnails: Copying Clips Selected clips can be copied to the P2 card in the desired 
slot or SD memory card.
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Use the cursor buttons to move the pointer to the 
desired clip and press the SET button.
3Press the THUMBNAIL MENU button and select 
OPERATION  COPY from the thumbnail menu.
Select slot 1-5 or SD memory card as the destination.
4The confirmation window appears. Use the cursor 
buttons and...