Panasonic Memory Card Camera Recorder Ajhpx2700 Operating Instructions

91Adjustments and Settings for Recording: Handling data
Adjustments and Settings for Recording
4To format the SD memory card, turn the jog dial button 
to move the arrow (cursor) to YES. Then, press the dial 
button.
When the SD memory card has been formatted, the 
following message appears:
The card will not be formatted if the following message 
appears when the jog dial button is pressed:
5To exit the menu, press the MENU button.
The settings menu disappears and the status of the unit 
is indicated at...

92Adjustments and Settings for Recording: Handling data
6Turn the jog dial button until a desired character 
appears.
The characters that appear are switched in the following 
order:
7Press the jog dial button to accept a desired character.
8Turn the jog dial button to move the arrow (cursor) to the 
next digit (clockwise), and repeat steps 6 - 7 to set 
characters (up to 8 characters).
9When the title is set, turn the jog dial button to move the 
arrow (cursor) to : .
10Press the jog dial button to...

93Adjustments and Settings for Recording: Handling data
Adjustments and Settings for Recording
1Navigate the menu to the  
screen.
2Turn the jog dial button to move the arrow (cursor) to the 
menu option R.SELECT. Then, press the dial button.
3Turn the jog dial button to select a desired number (1 - 
8). Then, press the dial button.
4Turn the jog dial button to move the arrow (cursor) to the 
option READ.
5Press the jog dial button to display the following 
message:
6Turn the jog dial button to move the...

94Adjustments and Settings for Recording: Handling data It is possible to write the settings data into the user area of 
the internal memory of the unit, or to read data written in this 
area.
This data allows you to quickly reproduce an optimum setup 
state.
To write data, go to the  screen from the FILE 
page. To read the written user data, go to the  
screen from the FILE page.
1Navigate the menu to the  screen.
2Turn the jog dial button to move the arrow (cursor) to the 
option WRITE USER DATA....

95Adjustments and Settings for Recording: Handling data
Adjustments and Settings for Recording
It is possible to write the settings data into the scene file area 
of the internal memory of the unit, or to read data written in 
this area. 16 types of scene files are available. This data 
allows you to quickly reproduce an optimum setup state.
To use the scene file data, go to the  screen from 
the FILE page.
1Navigate the menu to the SCENE screen.
2Turn the jog dial button to move the arrow (cursor) to...

96Adjustments and Settings for Recording: Handling data
1Navigate the menu to the  screen.
2Turn the jog dial button to move the arrow (cursor) to the 
option SCENE SEL.
3Press the jog dial button to blink scene file numbers. 
Then, turn the dial button to select a desired scene file 
number (1 to 16).
4Press the jog dial button to accept the scene file.
5Turn the jog dial button to move the arrow (cursor) to the 
READ option.
6Press the jog dial button to display the following 
message:
7Turn the jog...

97Adjustments and Settings for Recording: Handling data
Adjustments and Settings for Recording
1Navigate the menu to the  screen.
2Turn the jog dial button to move the arrow (cursor) to the 
TITLE item.
3Press the jog dial button to move the arrow (cursor) to 
the title entry area, putting the unit in entry mode.
4Turn the jog dial button until a desired character 
appears.
The characters that appear are switched in the following 
order:
5Press the jog dial button to accept a desired character.
6Turn the...

98Adjustments and Settings for Recording: Handling data The menu settings can be reset to their defaults.
To reset the settings to their defaults, select the menu option 
READ FACTORY DATA in the  screen on the 
FILE page.
All settings will be reset to their defaults.

99Adjustments and Settings for Recording: Handling data
Adjustments and Settings for Recording
1Using the menu operations, open the  
screen from the FILE page.
2Turn the jog dial button to move the arrow (cursor) to the 
FILE SELECT item.
3Press the jog dial button and the file number will flash. 
Turn the jog dial button to select the file (1 to 64) to be 
recorded.
4Press the jog dial button to enter the file number.
5Turn the jog dial button to move the arrow (cursor) to the 
TITLE item.
6When the...

100Adjustments and Settings for Recording: Handling data
13When the jog dial button is pressed, the following 
message appears.14Turn the jog dial button to move the arrow (cursor) to 
YES, and press the jog dial button.
The current white shading correction value, the flare 
compensation value, and the RB gain offset correction 
value are stored in the built-in memory of the unit.