Panasonic Memory Card Camera Recorder Ajhpx2000 Operating Instructions

							161Menu : Menu Description Tables
 Menu
The ____ in the Adjustable Range column indicates the
preset mode. 
PA I N T
RB GAIN CONTROL
Items/
Data Saved Adjustable 
Range
 Remarks 
R GAIN AWB 
PRE–200

+000

+200
For setting the Rch gain when the 
WHITE BAL switch is in the PRST 
position.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
B GAIN AWB 
PRE–200

+000

+200
For setting the Bch gain when the 
WHITE BAL switch is in the PRST 
position.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
R GAIN AWB A –200

+000

+200
For setting the Rch gain when the 
WHITE BAL switch is in the A position.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
B GAIN AWB A –200

+000

+200
For setting the Bch gain when the 
WHITE BAL switch is in the A position.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
R GAIN AWB B –200

+000

+200
For setting the Rch gain when the 
WHITE BAL switch is in the B position.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
B GAIN AWB B –200

+000

+200
For setting the Bch gain when the 
WHITE BAL switch is in the B position.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
AW B  A  G A I N  
OFFSETON
OFFFor setting the values of the Rch gain 
and the Bch gain when the auto white 
balance is executed as the WHITE BAL 
switch is in the A position.
ON:To retain the values set in the 
items of R GAIN AWB A and B 
GAIN AWB A
OFF:The values of the Rch gain and 
the Bch gain is set to “0”.
SCUFR
AW B  B  G A I N  
OFFSETON
OFFFor setting the values of the Rch gain 
and the Bch gain when the auto white 
balance is executed as the WHITE BAL 
switch is in the B position.
ON:To retain the values set in the 
items of R GAIN AWB B and B 
GAIN AWB B
OFF:The values of the Rch gain and 
the Bch gain is set to “0”.
SCUFR
RGB BLACK CONTROL
Items/
Data Saved Adjustable 
Range
 Remarks 
MASTER PED –200

+015

+200
For setting the level of the master 
pedestal.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
R PEDESTAL
–100

+000

+100
For setting the pedestal level of the Rch.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
G PEDESTAL –100

+000

+100
For setting the pedestal level of the 
Gch.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
B PEDESTAL –100

+000

+100
For setting the pedestal level of the Bch.zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
PEDESTAL 
OFFSETON
OFFFor setting the pedestal levels of the 
Rch, the Gch and the Bch when the 
auto black balance is adjusted.
ON:To retain the values set in the 
respective items of R PEDESTAL, 
G PEDESTAL, and B PEDESTAL
OFF:The pedestal levels of the Rch, 
the Gch and the Bch are set to 
”0”.
SCUF –
R FLARE –100

+000

+100
For adjusting the flare level of the Rch. 
Adjustment values in this item are 
added to the flare adjustment value that 
is adjusted on  
screen.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
G FLARE –100

+000

+100
For adjusting the flare level of the Gch. 
Adjustment values in this item are 
added to the flare adjustment value that 
is adjusted on  
screen.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
B FLARE –100

+000

+100
For adjusting the flare level of the Bch. 
Adjustment values in this item are 
added to the flare adjustment value that 
is adjusted on  
screen.
zIf the remote control unit is
connected, settings made from the
menu are disabled. (The set value is
displayed.)
SCUFR
AJ-HPX2000P(VQT1D27-1)E.book  161 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							162Menu : Menu Description Tables
‹Note
The items indicated by „ are the setting items for PAINT
MENU SW(
„) R/W in the 
screen. The items without 
„ are the setting items for
PAINT MENU LEVEL R/W. 
Please refer to [
SD CARD R/W SELECT] (page 184) for
more information. 
The ____ in the Adjustable Range column indicates the
preset mode. 
MATRIX
Items/
Data Saved Adjustable 
Range
 Remarks 
„MATRIX 
TA B L EA
B
For selecting the color correction table 
for the linear matrix.
SCUFR
MATRIX R-G –63

+00

+63
For performing the linear matrix 
adjustment. (red/green)
SCUFR
MATRIX R-B –63

+00

+63
For performing the linear matrix 
adjustment. (red/blue)
SCUFR
MATRIX G-R –63

+00

+63
For performing the linear matrix 
adjustment. (green/red)
SCUFR
MATRIX G-B –63

+00

+63
For performing the linear matrix 
adjustment. (green/blue)
SCUFR
MATRIX B-R –63

+00

+63
For performing the linear matrix 
adjustment. (blue/red)
SCUFR
MATRIX B-G –63

+00

+63
For performing the linear matrix 
adjustment. (blue/green)
SCUFR
„L MATRIX 
TA B L EOFFA
B
For selecting the color correction table 
when the GAIN switch is in the L 
position.
SCUFR
„M MATRIX 
TA B L EOFFA
B
For selecting the color correction table 
when the GAIN switch is in the M 
position.
SCUF –
„H MATRIX 
TA B L EOFF
A
B
For selecting the color correction table 
when the GAIN switch is in the H 
position.
SCUF –
COLOR CORRECTION
Items/
Data Saved Adjustable 
Range
 Remarks 
R
(SAT)–63 : +00 : +63
For performing the color saturation 
correction of red. 
SCUFR
R-Mg
(SAT)–63 : +00 : +63
For performing the color 
saturationcorrection between red and 
magenta.
SCUFR
Mg
(SAT)–63 : +00 : +63
For performing the color 
saturationcorrection of magenta.
SCUFR
Mg-B
(SAT)–63 : +00 : +63
For performing the color saturation 
correction between magenta and blue.
SCUFR
B
(SAT)–63 : +00 : +63
For performing the color saturation 
correction of blue.
SCUFR
B-Cy
(SAT)–63 : +00 : +63
For performing the color saturation 
correction between blue and cyan.
SCUFR
Cy
(SAT)–63 : +00 : +63
For performing the color saturation 
correction of cyan.
SCUFR
Cy-G
(SAT)–63 : +00 : +63
For performing the color saturation 
correction between cyan and green.
SCUFR
G
(SAT)–63 : +00 : +63
For performing the color saturation 
correction of green.
SCUFR
G-Yl
(SAT)–63 : +00 : +63
For performing the color saturation 
correction between green and yellow.
SCUFR
Yl
(SAT)–63 : +00 : +63
For performing the color saturation 
correction of yellow.
SCUFR
Yl-R
(SAT)–63 : +00 : +63
For performing the color saturation 
correction between yellow and red.
SCUFR
AJ-HPX2000P(VQT1D27-1)E.book  162 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							163Menu : Menu Description Tables
 Menu
The ____ in the Adjustable Range column indicates the
preset mode. 
‹Notes
zThe items indicated by „ are the setting items for PAINT
MENU SW(
„) R/W in the 
screen. The items without 
„ are the setting items for
PAINT MENU LEVEL R/W. 
Please refer to [
SD CARD R/W SELECT] (page 184) for
more information. 
zIf images are shot when the master gain is set to –3dB,
some coloring phenomena may occur on images in very
bright sections. In order to suppress the coloring
phenomena, switch the OUTPUT AUTO KNEE switch to
“CAM AUTO KNEE OFF”, set the MANUAL item on the
KNEE/LEVEL screen to “ON”, and then set a smaller
value for the KNEE SLOPE item on the KNEE/LEVEL
screen. After executing these settings, confirm that there
are no coloring phenomena and then start shooting.
Items/
Data Saved Adjustable 
Range
 Remarks 
R(PHASE) –63 : +00 : +63
For performing the hue correction for 
red.
SCUFR
R-Mg(PHASE) –63 : +00 : +63
For performing the hue correction 
between red and magenta.
SCUFR
Mg(PHASE) –63 : +00 : +63
For performing the hue correction for 
magenta.
SCUFR
Mg-B(PHASE) –63 : +00 : +63
For performing the hue correction 
between magenta and blue.
SCUFR
B(PHASE)
–63 : +00 : +63
For performing the hue correction for 
blue.
SCUFR
B-Cy(PHASE) –63 : +00 : +63
For performing the hue correction 
between blue and cyan.
SCUFR
Cy(PHASE) –63 : +00 : +63
For performing the hue correction for 
cyan.
SCUFR
Cy-G(PHASE) –63 : +00 : +63
For performing the hue correction 
between cyan and green.
SCUFR
G(PHASE) –63 : +00 : +63
For performing the hue correction for 
green.
SCUFR
G-Yl(PHASE) –63 : +00 : +63
For performing the hue correction 
between green and yellow.
SCUFR
Yl(PHASE) –63 : +00 : +63
For performing the hue correction for 
yellow.
SCUFR
Yl-R(PHASE) –63 : +00 : +63
For performing the hue correction 
between yellow and red.
SCUFR
„COLOR 
CORRECTON
OFFFor switching ON/OFF of the 12-axis 
independent color correction of the 
position selected with the GAIN switch 
(L, M, H).
SCUFR
LOW SETTING
Items/
Data Saved Adjustable 
Range
 Remarks 
„MASTER 
GAIN–3dB : 0dB : 30dB
Select the master gain from –3, 0, 3, 6, 
9, 12, 15, 18, 21, 24, 27, or 30dB. 
SCUFR
H.DTL LEVEL 00 : 10 : 63
For performing the horizontal detail 
correction level setting.
SCUFR
V.DTL LEVEL 00 : 20 : 31
For performing the vertical detail 
correction level setting.
SCUFR
DTL CORING 00 : 01 : 15
For performing the noise elimination 
level setting for detail.
SCUFR
H.DTL FREQ.
00 : 18 : 31
For performing the horizontal detail 
frequency selection.
SCUFR
LEVEL 
DEPEND.0
1
 : 5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details 
of dark sections are compressed.
If the numerical value is larger, details of 
bright sections are also compressed.
SCUFR
MASTER 
GAMMA0.30 : 0.45 : 0.75
For setting the master gamma. (0.01 
step)
SCUFR
BLACK 
GAMMA–3 : OFF : +3
For setting the gamma curve for the dark 
portion.
–3 to –1:
The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
SCUFR
„MATRIX 
TA B L EOFF
A
B
For selecting the color correction table 
for the linear matrix.
SCUFR
„COLOR 
CORRECTON
OFFFor switching ON/OFF of the 12-axis 
independent color correction.
SCUFR
AJ-HPX2000P(VQT1D27-1)E.book  163 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							164Menu : Menu Description Tables
‹Note
The items indicated by „ are the setting items for PAINT
MENU SW(
„) R/W in the 
screen. The items without 
„ are the setting items for
PAINT MENU LEVEL R/W. 
Please refer to [
SD CARD R/W SELECT] (page 184) for
more information. 
The ____ in the Adjustable Range column indicates the
preset mode. 
MID SETTING
Items/
Data Saved Adjustable 
Range
 Remarks 
„MASTER 
GAIN–3dB

6dB

30dB
Select the master gain from –3, 0, 3, 6, 
9, 12, 15, 18, 21, 24, 27, or 30dB. 
SCUF –
H.DTL LEVEL 00

08

63
For performing the horizontal detail 
correction level setting.
SCUF –
V.DTL LEVEL 00

18

31
For performing the vertical detail 
correction level setting.
SCUF –
DTL CORING 00

02

15
For performing the noise elimination 
level setting for detail.
SCUF –
H.DTL FREQ.
00

18

31
For performing the horizontal detail 
frequency selection.
SCUF –
LEVEL 
DEPEND.0
1


5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, 
details of dark sections are 
compressed.
If the numerical value is larger, details of 
bright sections are also compressed.
SCUF –
MASTER 
GAMMA0.30

0.45

0.75
For setting the master gamma. (0.01 
step)
SCUF –
BLACK 
GAMMA–3 : OFF : +3
For setting the gamma curve for the 
dark portion.
–3 to –1:
The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
SCUF –
„MATRIX 
TA B L EOFF
A
B
For selecting the color correction table 
for the linear matrix.
SCUF –
„COLOR 
CORRECTON
OFFFor switching ON/OFF of the 12-axis 
independent color correction.
SCUF –
HIGH SETTING
Items/
Data Saved Adjustable 
Range
 Remarks 
„MASTER 
GAIN–3dB

12dB

30dB
Select the master gain from –3, 0, 3, 6, 
9, 12, 15, 18, 21, 24, 27, or 30dB. 
SCUF –
H.DTL LEVEL 00

06

63
For performing the horizontal detail 
correction level setting.
SCUF –
V.DTL LEVEL 00

16

31
For performing the vertical detail 
correction level setting.
SCUF –
DTL CORING 00

03

15
For performing the noise elimination 
level setting for detail.
SCUF –
H.DTL FREQ.
00

18

31
For performing the horizontal detail 
frequency selection.
SCUF –
LEVEL 
DEPEND.0

3

5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, 
details of dark sections are 
compressed.
If the numerical value is larger, details of 
bright sections are also compressed.
SCUF –
MASTER 
GAMMA0.30

0.55

0.75
For setting the master gamma. (0.01 
step)
SCUF –
BLACK 
GAMMA–3 : OFF : +3
For setting the gamma curve for the 
dark portion.
–3 to –1:
The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
SCUF –
„MATRIX 
TA B L EOFF
A
B
For selecting the color correction table 
for the linear matrix.
SCUF –
„COLOR 
CORRECTON
OFFFor switching ON/OFF of the 12-axis 
independent color correction.
SCUF –
AJ-HPX2000P(VQT1D27-1)E.book  164 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							165Menu : Menu Description Tables
 Menu
The ____ in the Adjustable Range column indicates the
preset mode. 
ADDITIONAL DTL
Items/
Data Saved Adjustable 
Range
 Remarks 
KNEE APE 
LV LOFF
1
2
 : 5
For changing the detail level of the high 
brightness portion.
SCUFR
DTL GAIN(+) –31 : +00 : +31
Adjust the detail level toward + 
(upwards). 
SCUFR
DTL GAIN(–) –31 : +00 : +31
Adjust the detail level toward the – 
(downwards). 
SCUFR
DTL CLIP00 : 63
For setting the level for clipping the 
detail signals.
SCUFR
DTL SOURCE(R+G)/2(G+B)/2
2G+R+B /4
(3G+R)/4
R
G
For setting the proportion of the RGB 
signal components that provide the 
detail.
SCUFR
V DTL FREQ 360TV
450TV
540TV
630TV
720TV
For selecting the vertical detail 
frequency. (In HD mode only
£
zIt is enabled when the recording
format is set to 720P.
SCUFR
H.DTL LINE 
MIX0H
1H
2H
For setting the number of scanning lines 
to be added to the video signals in order 
to generate the horizontal detail signals. 
(In HD mode only
£SCUFR
MASTER DTL –31 : +00 : +31
For revising the master detail level.
SCUFR
AJ-HPX2000P(VQT1D27-1)E.book  165 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							166Menu : Menu Description Tables
‹Note
The items indicated by „ are the setting items for PAINT
MENU SW(
„) R/W in the 
screen. The items without 
„ are the setting items for
PAINT MENU LEVEL R/W. 
Please refer to [
SD CARD R/W SELECT] (page 184) for
more information. 
The ____ in the Adjustable Range column indicates the
preset mode. 
SKIN TONE DTL
Items/
Data Saved Adjustable 
Range
 Remarks 
„SKIN TONE 
DTLOFF
A
B
ABFor selecting the skin color table for 
enabling the skin tone detail.
The skin color table is provided in the 
SKIN TONE TABLE item.
By enabling the skin tone detail, it is 
possible to shoot human skin more 
accurately.
SCUFR
„SKIN TONE 
ZEBRA VFON
OFFFor the setting to display the zebra 
pattern in the skin tone area displayed in 
the viewfinder screen.
The zebra pattern is displayed when this 
item is turned “ON” and the  screen is opened.
The zebra pattern is displayed on area A 
or B, which is selected in the SKIN 
TONE TABLE item.
It is impossible to display both area A 
and B at the same time.
SCUFR
SKIN TONE 
TABLEA
B
For selecting the skin color table for 
subjects to which the skin tone table 
applies.
SCUFR
SKIN TONE 
GETFor fetching the color information of A or 
B, which is selected in the SKIN TONE 
TABLE item, near the center marker.
When this function is executed, data 
from I CENTER to Q PHASE are fetched 
automatically.
The fetched data will be the table data of 
A or B, which is selected in the SKIN 
TONE TABLE item.
It is impossible to obtain color 
information of both A and B at the same 
time.
–––––
SKIN DTL 
CORING0 : 5 : 7
For setting the effect level of the skin 
tone detail.
SCUFR
Y MAX 000 : 190 : 255
For setting the maximum value of 
brightness for enabling the skin tone.
SCUFR
Y MIN
000 : 010 : 255
For setting the minimum value of 
brightness for enabling the skin tone.
SCUFR
I CENTER 000 : 035 : 255
For setting the center position on the I 
axis (for setting an area that enables 
skin tone.)
SCUFR
I WIDTH 000 : 055 : 255
For setting the area width for enabling 
the skin tone on the I-axis of which the 
center is the I CENTER.
SCUFR
Q WIDTH 00 : 10 : 90
For setting the area width for enabling 
the skin tone on the Q-axis of which the 
center is the I CENTER.
SCUFR
Q PHASE –180 : +000 : +179
For setting phases of the area for 
enabling skin tone as setting the 
standard to the Q-axis.
SCUFR
R-Y
B-Y
Q-WIDTHI-WIDTH
Q-PHASE I-CENTER
Y
Y- M A X
Y- M I N
0
– direction+ direction
 = SKIN TONE AREA
AJ-HPX2000P(VQT1D27-1)E.book  166 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							167Menu : Menu Description Tables
 Menu
‹Note
The items indicated by „ are the setting items for PAINT
MENU SW(
„) R/W in the 
screen. The items without 
„ are the setting items for
PAINT MENU LEVEL R/W. 
Please refer to [
SD CARD R/W SELECT] (page 184) for
more information. 
zWhen the GAMMA MODE SEL item is used for FILM
LIKE3, the following settings are recommended.
MANUAL KNEE
ON
KNEE POINT
85.0%
KNEE SLOPE
50
The ____ in the Adjustable Range column indicates the
preset mode. 
KNEE/LEVEL
Items/
Data Saved Adjustable 
Range
 Remarks 
MASTER PED –200 : +015 : +200
Set the master pedestal. 
SCUFR
„MANUAL 
KNEEONOFF
Set the mode when the AUTO KNEE 
switch is OFF. The KNEE POINT/
SLOPE set value is enabled when this 
setting is ON. 
SCUFR
KNEE POINT 70.0% : 93.0% : 107.0%
For setting the knee point position in 
increments of 1% steps.
SCUFR
KNEE SLOPE 00 : 85 : 99
For setting the inclination of the knee.
SCUFR
„WHITE CLIPONOFF
Set the WHITE CLIP feature to ON or 
OFF. The WHITE CLIP LVL set value is 
enabled when this setting is ON. 
SCUFR
WHITE CLIP 
LV L90% : 109%
Set WHITE CLIP LEVEL. 
SCUFR
A.KNEE 
POINT80% : 93% : 107%
Set the AUTO KNEE POINT position in 
1% steps. This setting is enabled when 
the OUTPUT/AUTO KNEE selector 
switch is set to CAM.AUTO KNEE ON. 
SCUFR
A.KNEE LVL 100 : 107 : 109
Set the AUTO KNEE LEVEL. 
SCUFR
A.KNEE 
RESPONSE1 : 4 : 8
Set the AUTO KNEE response speed. 
The smaller the setting value, the faster 
the response speed.
SCUFR
CHROMA 
LEVELOFF
–99%
 : +00% : +40%
For setting the chroma level of the PR 
signals and the PB signals.
If this is set to OFF, the color elements of 
video signals are eliminated.
SCUFR
DRS EFFECT 
DEPTH1
2
3
Set the compression level of the high-
brightness component of DRS. If the 
numerical value is larger, the 
compression level of the high-brightness 
component increases.
SCUFR
GAMMA
Items/
Data Saved Adjustable 
Range
 Remarks 
MASTER 
GAMMA0.30 : 0.45 : 0.75
Set the master gamma in 0.01% steps. 
SCUFR
R GAMMA –15 : +00 : +15
Set the Rch gamma. 
SCUFR
B GAMMA –15 : +00 : +15
Set the Bch gamma. 
SCUFR
GAMMA 
MODE SELDFLT
HD
SD
FILMLIKE1
FILMLIKE2
FILMLIKE3
For selecting the gamma mode.DFLT:This will operate as SD gamma in 
SD mode, or HD gamma in HD 
mode.
HD:
Video gamma characteristics for HD 
(High Definition)
SD:
The gain in the dark section is higher 
than the HD gamma.
FILMLIKE1:
The cinema gamma characteristics 
for video applications are selected.
FILMLIKE2:
The cinema gamma characteristics 
for video applications are selected.
In this setting gradations in highlit 
areas can be expressed better than 
when FILM LIKE1 is selected.
FILMLIKE3:
The cinema gamma characteristics 
for video applications are selected.
In this setting gradations in highlit 
areas can be expressed better than 
when FILM LIKE2 is selected.
SCUFR
SD
HDFILM LIKE1
FILM LIKE2FILM LIKE3
Video level
Luminance
AJ-HPX2000P(VQT1D27-1)E.book  167 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							168Menu : Menu Description Tables
‹Note
All items in CAMERA SETTING are setting targets of the
item PAINT MENU SW(
„) R/W in the  screen.
The ____ in the Adjustable Range column indicates the
preset mode. 
„CAMERA SETTING
Items/
Data Saved Adjustable 
Range
 Remarks 
DETAILON
OFF
For switching ON/OFF of the detail 
signals.
SCUFR
2D LPF ON
OFFFor specifying whether or not to enable 
or disable the 2-dimension LPF, which 
reduce the cross color (for the SD mode 
only).
‹NoteIn PAL mode,  the 2-dimension LPF is 
disable.
SCUFR
HIGH COLOR ON
OFFON/OFF switching for the HIGH COLOR 
mode, which enhances the color 
dynamic range. 
SCUFR
GAMMAONOFF
For switching ON/OFF of the gamma 
correction.
SCUFR
TEST SAW ON
OFFSwitch the test signal ON or OFF. 
SCUFR
FLAREON
OFF
Set the flare correction to ON or OFF. 
SCUFR
H-F COMPE.ONOFF
For switching ON/OFF of the aperture 
correction.
SCUFR
AJ-HPX2000P(VQT1D27-1)E.book  168 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							169Menu : Menu Description Tables
 Menu
ZEBRA Pattern Display
The ____ in the Adjustable Range column indicates the
preset mode. 
VF
VF DISPLAY
Items/
Data Saved Adjustable 
Range
 Remarks 
DISP 
CONDITIONNORMAL
HOLD
NORMAL:Display status constantly. 
HOLD:Display status only when the 
MODE CHECK switch is 
pressed. 
–CUFR
DISP MODE 1
2
3Set the DISP MODE. 
Switch the camera’s Warning/Message 
indication. Please refer to [
Display 
Modes and Setting Changes/adjustment 
Result Messages
] (page 78) for more 
information. 
–CUFR
VF OUTY
NAM
R
G
B
For selecting the video signals to display 
in the viewfinder screen.
Y:Brightness signal
NAM:Output signal with the highest 
level among R, G, and B signals. 
R:Rch signal
G:Gch signal
B:Bch signal
–CUFR
VF DTL0 : 5
For setting the detail level of the 
viewfinder screen.
The details of the signals for the 
viewfinder are further enhanced. If 0 is 
selected, then the detail is the same as 
that for the main line.
–CUFR
ZEBRA1 
DETECT0% : 70% : 109%
Set the ZEBRA1 detection level (IRE 
value). 
–CUFR
ZEBRA2 
DETECT0% : 85% : 109%
Set the ZEBRA2 detection level (IRE 
value). 
–CUFR
ZEBRA2 ON
SPOT
OFF
Set the ZEBRA2 to ON, OFF, or SPOT. 
–CUFR
LOW LIGHT 
LV LOFF
10%
15%
20%
25%
30%
35%Set the camera incoming light volume at 
which to display LOW LIGHT. 
–CUFR
RC MENU 
DISP.ONOFF
For the setting to display the menu in the 
viewfinder screen when the remote 
control unit is connected to the unit.
–CUFR
50M 
INDICATORON
OFFFor specifying whether to enable or 
disable the 50M LED inside the SD 
viewfinder when the REC MODE menu 
option is set to DVCPRO50. (In SD 
mode only
£–CUFR
MARKER/
CHAR LVL50%
60%
70%
80%
90%
100%
Adjust the brightness of markers and 
characters displayed on the VF. 
–CUFR
SPOT OFF ON
109%
0% ZEBRA 2
DETECTZEBRA 2
ZEBRA 1
DETECT
Video Level
AJ-HPX2000P(VQT1D27-1)E.book  169 ページ  ２００７年７月３０日　月曜日　午後１時３１分 
						

							170Menu : Menu Description Tables
‹Note
When SYSTEM MODE is set to either “1080-59.94i”,
“1080-50i”, “720-59.94P”, or “720-50P” (in HD mode), the
safety zone marker, the safety zone area, and the frame
marker are displayed on the LCD monitor or the SD
viewfinder if “LT-BOX” or “S-CROP” is selected in
DOWNCON MODE.
zThe user box can be displayed in any position as a
boxtype cursor.
‹Note
When SYSTEM MODE item is set to either “1080-59.94i”,
“1080-50i”, “720-59.94P”, or “720-50P” (in HD mode), the
user box is not displayed on the LCD monitor or the SD
viewfinder if “LT-BOX” or “S-CROP” is selected in
DOWNCON MODE.
The ____ in the Adjustable Range column indicates the
preset mode. 
VF MARKER
Items/
Data Saved Adjustable 
Range
 Remarks 
TA B L EA
B
Select the VF MARKER setting table. 
First, select table A or B, then set the 
items below for each table. 
–CUFR
CENTER 
MARKOFF
1
2
3
4
Switch the center mark. 
OFF:Do not display center mark. 
1:+ (large)
2:Hollow (large)
3:+ (small)
4:Hollow (small)
–CUFR
SAFETY 
MARKOFF
1
2Select the frame type for the safety 
zone. 
OFF:Do not display frame. 
1:Box
2:Corner frame
–CUFR
SAFETY 
AREA80% : 90% : 100%
For setting the size of the safety marker.
It is possible to set the size by units of 
1% with a fixed ratio between of width 
and height.
–CUFR
FRAME MARK ON
OFFSet the frame marker to ON or OFF. 
–CUFR
FRAME SIG4:313:9
14:9
VISTA
Set the frame marker. 
Only enabled when REC MODE is set to 
16:9. 
The VISTA ratio is 16:8.65. 
–CUFR
FRAME LVL 0 : 15
Set the level outside the frame marker. 0:Equivalent to signal OFF. ¢Blanking 
status£
15:Same brightness as center area. This 
setting, however, is disabled if the 
FRAME SIG is set to VISTA. 
–CUFR
VF USER BOX
Items/
Data Saved Adjustable 
Range
 Remarks 
USER BOX ON
OFFFor setting whether the user box is 
displayed in the viewfinder or not.
–CUFR
USER BOX 
WIDTH1 : 13 : 100
For setting the horizontal width of the 
user box.
–CUFR
USER BOX 
HEIGHT1 : 13 : 100
For setting the horizontal position of the 
user box center.
–CUFR
USER BOX H 
POS–50 : +00 : +50
For setting the horizontal position of the 
user box center.
–CUFR
USER BOX V 
POS–50 : +00 : +50
For setting the vertical position of the 
user box center.
–CUFR
AJ-HPX2000P(VQT1D27-1)E.book  170 ページ  ２００７年７月３０日　月曜日　午後１時３１分