Home > Panasonic > Recording Equipment > Panasonic Matrix Switcher Wj Sx550c Operating Instructions

Panasonic Matrix Switcher Wj Sx550c Operating Instructions

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Matrix Switcher Wj Sx550c Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 130
    Add page 41 to Favourites
    image text
    Enable zoom 
    							43
2
SW1 Setting
These switches are used only for factory test.
Always keep these switches in the “OFF” positions
in the field.
Board Setting
Before installing this board, the following settings should be made by qualified service per-
sonnel or system installers.
1. Set switches (SW1) on the board to designate the data board number as shown in the
following table.
The factory default setting is Board Number 1.
1234OFFSW11234OFF
SW3SW100
SW150
SW200
SW250
SW300
SW350
SW400
SW450
SW5
SW6
Board
No.
1234
OFF
1234
OFF
1234
OFF
1234
OFF
1234
OFF
1234
OFF
1234
OFF
1234
OFF
1
2
3
4
5
6
7
8
2. Set switches (SW100, SW150, SW200, SW250, SW300, SW350, SW400 and SW450) on
the board to choose either Full Duplex (FULL) or Half Duplex (HALF) communication
lines as shown in the figure.
The factory default settings are Full Duplex (FULL).
SW100 - SW450
FULL
HALF
SW5
ON
OFF
LED
1234
OFFSW3SW6
12PROG
Full: 4 Lines
Half: 2 Lines
3. Set switch (SW5) on the board to choose ON or OFF mode for the LED indicator.
The indicator shows that control data operations on the board are normal.  
The factory default setting is ON.
4. Confirm that switches (SW3 and SW6) on the board are set as shown in the figure.
Note
    Add page 42 to Favourites
    image text
    Enable zoom 
    							44
2
This switcher has 15 slots, eleven of which are available for system expansion.
The CPU and Control Board, along with one Video Input Board and one Video Output Board are supplied as standard acces-
sories.
Depending on the number of camera inputs and monitor outputs required, additional WV-PB5508 Video Input Boards and WV-
PB5504A Video Output Boards will be required.
WJ-SX550C Matrix Switcher
5 4 3 2 167891011121314 15
OFF
+9V+5V−5V
POWER
ON
11A00001
Extension
1
2
WJ-SX550A
Extension
1
2
DATA
ADDRESS12345678
ON OFFDATA
ADDRESS12345678
ON OFF
WJ-AD550WJ-SX550AWJ-AD550
5 4 3 2 1 6789101112131415
CPURS-232C
TIME
ADJUST IN
COM
PRINTER
OUT    IN
VS/VD
VD
OUT
OFF
+9V+5V−5V
POWER
ON
11A00001
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
CONTROLDATA 1
DATA 2
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4MONITOR
ALARM OUT
RESET OUTEXT TIMING INRECOVER IN
OUTPUT
CAUTION
125V   4V
DATA 3
DATA 4
DATA 5
DATA 6
DATA 7
DATA 8
DATA 1
DATA 2
BOARD SELECTION FOR SYSTEM EXPANSION
The Extension Unit has also 15 slots and has two Extension Boards installed.
WJ-AD550 Extension Unit
    Add page 43 to Favourites
    image text
    Enable zoom 
    							45
2
The tables below show the components required for various system configurations.
Cameras
Cameras
1 - 8
9 - 16
17 - 24
25 - 32
33 - 40
41 - 48
49 - 56
57 - 641 - 4
1 - 4
1 - 4
1 - 4
1 - 4
1 - 4
1 - 4
1 - 4not required
not required
not required
not required
not required
not required
not required
not required1
1
1
1
1
1
1
14
5
6
7
8
9
10
1111
10
9
8
7
6
5
4 MonitorsExtension Unit
WJ-AD550Output Boards
WV-PB5504A
1
2
3
4
5
6
7
8
65 - 72 1 - 4 required 2 15 159
73 - 80 1 - 4 required 2 16 1410
81 - 88 1 - 4 required 2 17 1311
89 - 96 1 - 4 required 2 18 1212
97 - 104 1 - 4 required 2 19 1113
105 - 112 1 - 4 required 2 20 1014
113 - 120 1 - 4 required 2 21 915
121 - 128 1 - 4 required 2 22 816 Input Boards
WV-PB5508Slots Used Slots Left
1 - 8
9 - 16
17 - 24
25 - 32
33 - 40
41 - 48
49 - 56
57 - 645 - 8
5 - 8
5 - 8
5 - 8
5 - 8
5 - 8
5 - 8
5 - 8not required
not required
not required
not required
not required
not required
not required
not required2
2
2
2
2
2
2
25
6
7
8
9
10
11
1210
9
8
7
6
5
4
3 MonitorsExtension Unit
WJ-AD550Output Boards
WV-PB5504A
1
2
3
4
5
6
7
8
65 - 72 5 - 8 required 4 17 139
73 - 80 5 - 8 required 4 18 1210
81 - 88 5 - 8 required 4 19 1111
89 - 96 5 - 8 required 4 20 1012
97 - 104 5 - 8 required 4 21 913
105 - 112 5 - 8 required 4 22 814
113 - 120 5 - 8 required 4 23 715
121 - 128 5 - 8 required 4 24 616 Input Boards
WV-PB5508Slots Used Slots Left
    Add page 44 to Favourites
    image text
    Enable zoom 
    							46
2
Cameras
1 - 8
9 - 16
17 - 24
25 - 32
33 - 40
41 - 48
49 - 56
57 - 649 - 12
9 - 12
9 - 12
9 - 12
9 - 12
9 - 12
9 - 12
9 - 12not required
not required
not required
not required
not required
not required
not required
not required3
3
3
3
3
3
3
36
7
8
9
10
11
12
139
8
7
6
5
4
3
2 MonitorsExtension Unit
WJ-AD550Output Boards
WV-PB5504A
1
2
3
4
5
6
7
8
65 - 72 9 - 12 required 6 19 119
73 - 80 9 - 12 required 6 20 1010
81 - 88 9 - 12 required 6 21 911
89 - 96 9 - 12 required 6 22 812
97 - 104 9 - 12 required 6 23 713
105 - 112 9 - 12 required 6 24 614
113 - 120 9 - 12 required 6 25 515
121 - 128 9 - 12 required 6 26 416 Input Boards
WV-PB5508Slots Used Slots Left
Cameras
1 - 8
9 - 16
17 - 24
25 - 32
33 - 40
41 - 48
49 - 56
57 - 649 - 12
9 - 12
9 - 12
9 - 12
9 - 12
9 - 12
9 - 12
9 - 12not required
not required
not required
not required
not required
not required
not required
not required4
4
4
4
4
4
4
47
8
9
10
11
12
13
148
7
6
5
4
3
2
1 MonitorsExtension Unit
WJ-AD550Output Boards
WV-PB5504A
1
2
3
4
5
6
7
8
65 - 72 9 - 12 required 8 21 99
73 - 80 9 - 12 required 8 22 810
81 - 88 9 - 12 required 8 23 711
89 - 96 9 - 12 required 8 24 612
97 - 104 9 - 12 required 8 25 513
105 - 112 9 - 12 required 8 26 414
113 - 120 9 - 12 required 8 27 315
121 - 128 9 - 12 required 8 28 216 Input Boards
WV-PB5508Slots Used Slots Left
Notes:
• Two extension boards should be installed in the slots if the extension unit is required.
• The slots left can accommodate up to two (2) Alarm Boards or eight (8) Data Boards.
    Add page 45 to Favourites
    image text
    Enable zoom 
    							47
3
SECTION 3
INSTALLATION
AND
SYSTEM CONNECTIONS
    Add page 46 to Favourites
    image text
    Enable zoom 
    							48
3
INSTALLATIONS
Remove screws.
Side Panel
Palm-rest
Remove Screws.
Rubber
feet
Rack Mount Screws
Rubber
feet
WJ-SX550C Matrix Switcher
WJ-AD550 Extension Unit
Mounting into the Rack
1. Remove four rubber feet by removing four screws from
the bottom of the Matrix Switcher (Extension Unit).
2. Install the Matrix Switcher (Extension Unit) in the rack
securing it with eight screws (not included).
• The cooling fans inside the Matrix Switcher (or Extension Unit) are subject to wear and need to be replaced periodically.
• Do not block the ventilation opening or slots on the cover to prevent the temperature from rising inside the unit.
Always keep the temperature in the rack within 45˚C (113˚F).
• If the rack is subject to vibration, secure the rear of the unit to the rack using additional mounting brackets (procured
locally).
Cautions The installation described below should be made by qualified service personnel or system installers and should con-
form to all local codes.
WV-CU550C System Controller
Replacing the Side Panels with the optional WV-Q62 Rack Mounting Brackets
1. Remove both the left and right side panels of the System Controller by removing four screws.
2. Remove the Palm-rest located on the front of the System Controller by removing two screws.
3. Place the Rack Mounting Brackets on both sides of the System Controller and tighten with the four supplied screws. 
4. Install the System Controller with Rack Mounting Brackets in the rack by using four screws (procured locally).
Tighten
screws.
Rack Mounting Bracket
Rack Mount Screws
Rack Mount Screws
    Add page 47 to Favourites
    image text
    Enable zoom 
    							49
3
Each slot is identical, so the boards can be installed
in any slot.
However it is recommended to install the boards as
shown below for orderly installation.
Installing Additional Extension Boards
Before installing the additional extension boards, be sure to make the specified board settings.
Refer to the board settings for each board in section 2 for further details.
Extension Unit is not Required
Before installing any boards be sure to turn the power of
the Matrix Switcher off.
Caution
1. Remove the screws from the rear panel(s) of the WJ-
SX550C Matrix Switcher.
2. Remove the rear panel(s).
3. Place the Boards into the specified positions in the rear
of the Matrix Switcher by sliding them along the board
guides as shown below.
CPURS-232C
TIME
ADJUST IN
COM
PRINTER
OUT    IN
VS/VD
VD
OUT
OFF
+9V+5V−5V
POWERON
11A00001
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
33-64
ALARM
TEST
1-32
005
RESET
MODE
CONTROLDATA 1
DATA 2
DATA 3
DATA 4
DATA 5
DATA 6
DATA 7
DATA 8
TEST 1
TEST 2
OUT    IN1
OUT
   IN2
OUT
   IN3
OUT
   IN4MONITOR
ALARM OUT
RESET OUT
EXT TIMING IN
RECOVER IN
OUTPUT
OUT    IN1
OUT
   IN2
OUT
   IN3
OUT
   IN4MONITOR
ALARM OUT
RESET OUT
EXT TIMING IN
RECOVER IN
OUTPUT
OUT    IN1
OUT
   IN2
OUT
   IN3
OUT
   IN4MONITOR
ALARM OUT
RESET OUT
EXT TIMING IN
RECOVER IN
OUTPUT
OUT    IN1
OUT
   IN2
OUT
   IN3
OUT
   IN4MONITOR
ALARM OUT
RESET OUT
EXT TIMING IN
RECOVER IN
OUTPUT
Alarm Board
Video Input Board Video Output Board
Rear Panel
Remove four
screws.
Tighten screws.
Blank Panel
Board
Tighten screws.
or
4. Make sure to push in the Boards until they are  seated
firmly.
5. Secure the Board by tightening the two screws on the
board.
6. Close open spaces on the rear of the Matrix Switcher
with the  supplied rear panel(s) or the optional WV-Q63
Blank Panel(s).
Note
    Add page 48 to Favourites
    image text
    Enable zoom 
    							50
3
Extension Unit is required
Before installing any boards, be sure to turn the power
of the WJ-SX550C Matrix Switcher and WJ-AD550
Extension Unit off.
Caution
When the Extension Unit is required to install the
boards, follow the procedures as shown below.
•Removing Extension Boards
1. Remove the screws from rear panel(s) of the
Extension Unit.
2. Remove the rear panel(s).
3. Loosen two screws on the Extension Board(s).
4. Extract the Extension Board(s) from the rear of the
Extension Unit by sliding it along the board guides.
Remove screws.
Loosen two screws.
•Installing Additional Extension Boards
1. Install an Extension Board into slot number 15 of
the Matrix Switcher and Extension Unit.
2. Install the Video Input Boards into the specified
slots as shown below.
Board Number 1 to 8 go into the Matrix Switcher,
Board Number 9 to 16 go into the Extension Unit.
3. Install the Video Output Boards into the specified
slots as shown below.
Board Number 1 to 4 go into the Matrix Switcher.
Board Number 5 to 8 go into the Extension Unit.
Notes:
• Up to two Alarm Boards or eight Data Boards can
be installed in the Matrix Switcher and Extension
Unit.
When the Data Boards are installed in the
Extension Unit, be sure to set the Data Address
Switch on the Extension Boards to the specified
positions.
• It is recommended to install the boards as shown
in the figure for orderly installation.
33-64
ALARM
TEST1-32
005
RESET
MODE
CPURS-232C
TIME
ADJUST IN
COM
PRINTER
OUT    IN
VS/VD
VD
OUTOFF
+9V+5V−5V
POWERON
11A00001
OUT    IN1
OUT    IN2
OUT
   IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUT
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  INMONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUT    IN1
OUT    IN2
OUT
   IN3
OUT    IN4
OUTPUT
OUT
   IN1
OUT    IN2
OUT
   IN3
OUT    IN4
OUTPUTCONTROLDATA 1DATA 2
DATA 3
DATA 4
DATA 5
DATA 6DATA 7DATA 8TEST 1
TEST 2
33-64
ALARM
TEST1-32
005
RESET
MODE
OUT    IN1
OUT    IN2
OUT
   IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUTExtension
1
2
DATA
ADDRESS12345678ON OFF
WJ-SX550AWJ-AD550
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
OFF
+9V+5V−5V
POWERON
11A00001
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUT
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  INMONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
OUTPUT
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
OUTPUT
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUTExtension
1
2
DATA
ADDRESS12345678ON OFF
WJ-SX550AWJ-AD550
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
WJ-SX550C Matrix Switcher
Video Input Board
(Board #1-8)Video Output
Board
(Board #1-4)Extension
Board
Alarm
BoardVideo Input Board
(Board #9-16)Video Output
Board
(Board #5-8)Extension
Board
    Add page 49 to Favourites
    image text
    Enable zoom 
    							51
3
SYSTEM CONNECTIONS
TLTL
TLTL
CPURS-232C
TIME
ADJUST IN
COM
PRINTER
OUT    IN
VS/VD
VD
OUT
OFF
+9V+5V−5V
POWERON
11A00001
OUT    IN1
OUT    IN2
OUT
   IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUT
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  INMONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUT    IN1
OUT    IN2
OUT
   IN3
OUT    IN4
OUTPUT
OUT
   IN1
OUT    IN2
OUT
   IN3
OUT    IN4
OUTPUTCONTROLDATA 1
DATA 2
DATA 3
DATA 4
DATA 5
DATA 6
DATA 7
DATA 8
TEST 1
TEST 2
OUT    IN1
OUT    IN2
OUT
   IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUTExtension
1
2
12345678
ON OFF
WJ-SX550AWJ-AD550
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
DATA
UNIT ADDRESS
33-64
ALARM
TEST
1-32
005
RESET
MODE
33-64
ALARM
TEST
1-32
005
RESET
MODE
OFF
+9V+5V−5V
POWERON
11A00001
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUT
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  INMONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
OUTPUT
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
OUTPUT
OUT    IN1
OUT    IN2
OUT    IN3
OUT    IN4
MONITORALARM OUT
RESET OUT
EXT TIMING IN
RECOVER  IN
OUTPUTExtension
1
2
DATA
UNIT ADDRESS12345678
ON OFF
WJ-SX550AWJ-AD550
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1234
567
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
1
2
3
4
5
6
7
8
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
Combination Camera
Max. 128 cameras
Receiver Receiver
WJ-SX550C
Matrix Switcher
WJ-AD550
Extension Unit Computer
RS-232C Port
Printer
System Status
Monitor
Alarm Sensor
Max. 16  Monitors
WV-CU550C System Controller (max. 8 Controllers)
System Controller WV-CU550BSystem Controller WV-CU550BSystem Controller WV-CU550BSystem Controller WV-CU550B
Note:Refer to the Operating Instructions of the WJ-AD550 Extension Unit for connections when the WJ-AD550 Extension Unit
is used.
Overview of System Connections
    Add page 50 to Favourites
    image text
    Enable zoom 
    							52
3
Connection with the Camera Sites
Connect the Camera Site Equipment to the Camera Input Connectors (CAMERA IN, 1-8) on the Video Input Board(s).
Note:Make sure that the cable length between the camera site and the WJ-SX550C Matrix Switcher is less than 900 m
(3 000 ft) when using RG-59/U, BELDEN 9259 or equivalent cable.
INPUT
1
2
3
4
5
6
7
8
CAMERA IN
VIDEO OUT1
VIDEO OUT2
Camera 1 - 4
Video Input Board
WV-CA64
WV-CA51
WV-RC100 WV-RC150 WV-RC150WV-CA50 WV-CA50 (Video Active Loop Throught Out)
WV-7140/WV-7141 WV-7140/WV-7141
WV-7225 WV-7260D WV-7260D
AUX
AlarmAUXAlarmAUXAlarm
WV-CA64 (Video Active Loop Through Out)
Camera 5 - 8
Connection with the Camera Sites
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Matrix Switcher Wj Sx550c Operating Instructions