Panasonic Matrix Switcher Wj Sx150a Operating Instructions

							155
PAN/TILT ItemTransmission Command
(ASCII)Response (ASCII) Parameter (ASCII)CMD:CmmPTccxxyy — mm=Monitor No.
cc=Camera No. 
• Panning speed
xx=00  STOP
xx=01 to 40(HEX) + direction panning
(Max is 40 and min is 01)
xx=81 to C0(HEX) - direction panning
(Max is C0 and min is 81)
• Tilting speed
yy=00  STOP
yy=01 to 40(HEX) + direction tilting 
(Max is 40 and min is 01)
yy=81 to C0(HEX) - direction tilting
(Max is C0 and min is 81)
Camera Control
CMD:CmmZMccn Zoom — mm=Monitor No.
cc=Camera No. 
n=0  STOP
n=1  TELE
n=2  WIDE
Focus CMD:CmmFCccn — mm=Monitor No.
cc=Camera No.
n=0  STOP
1  NEAR
2  FAR
3  AUTO FOCUS
Iris CMD:CmmIRccn — mm=Monitor No.
cc=Camera No.
n=0  STOP
n=1  OPEN
n=2  CLOSE
n=3  AUTO IRIS 
						

							156 156
AUX2 CMD:CmmA2ccn —mm=Monitor No.
cc=Camera No.
n=0 OFF
n=1 ON AUX1 CMD:CmmA1ccn —mm=Monitor No.
cc=Camera No.
n=0 OFF
n=1 ON
mm=Monitor No.
cc=Camera No.
n=0 OFF (Color)
n=1 ON (BW)
mm=Monitor No.
cc=Camera No.
n=0 STOP
n=1 PLAY
n=2 LEARN
mm=Monitor No.
cc=Camera No.
nnn=Camera function No. (001 to 256) ItemTransmission Command
(ASCII)Response (ASCII) Parameter (ASCII)
Cameras SETUP MENU  CMD:CmmCMccn — mm=Monitor No.
cc=Camera No.
n=0 OFF
n=1 ON
The following commands are available in
SETUP MENU:
CMD:AmmJL (Move the cursor leftward)
CMD:AmmJR (Move the cursor rightward)
CMD:AmmJU (Move the cursor upward)
CMD:AmmJD (Move the cursor downward)
CMD:AmmST (SET)
CMD:AmmES (ESC)
CMD:AmmIN (RESET)
CMD:AmmDE (ALL RESET)
Program Preset Position CMD:CmmPSccnn —mm=Monitor No.
cc=Camera No.
nn=01 to 64 Preset position No. Call Preset Position CMD:CmmPMccnn — mm=Monitor No.
cc=Camera No.
nn=01 to 64 Preset position No.
nn=00 Home position
Color/BW CMD:CmmBWccn —
Patrol CMD:CmmPAccn —
Camera Function CMD:CmmCFccnnn —
Auto Panning CMD:CmmAPccn —mm=Monitor No.
cc=Camera No.
n=0  AUTO PAN
n=1  AUTO SORT
n=2  AUTO SEQ
Wiper CMD:CmmWPccn —mm=Monitor No.
cc=Camera No.
n=0  OFF
n=1  ON
Defroster CMD:CmmDFccn —mm=Monitor No.
cc=Camera No.
n=0  OFF
n=1  ON 
						

							157157
Transmission command toggles zoom.
mm=Monitor No.
n=0  Zoom OFF
n=1 + mark display ON*
n=2  Two-fold zoom
n=4  x4Live image/Playback image
n=8  x8Live image/Playback image
*Available only with the Multiplexer board CMD:RmmZM Multiscreen segment switch-
ing
Recorder Control
ItemTransmission Command
(ASCII)Response (ASCII) Parameter (ASCII)
CMD:RmmML ANS:RmmML mm=Monitor No.
Electronic Zoom ANS:RmmZMn
Play CMD:RmmPL ANS:RmmPL mm=Monitor No.
Pause CMD:RmmPA ANS:RmmPA mm=Monitor No.
Stop CMD:RmmSPn ANS:RmmSPn mm=Monitor No.
n=0   Stop playback 
n=1   Stop recording
Recorder button CMD:HmmRSnn ANS:HmmRSnn nn=00 Master recorder selected
nn=01 Slave 1 recorder selected
nn=02 Slave 2 recorder selected
nn=03 Slave 3 recorder selected
nn=04 Slave 4 recorder selected
nn=99 Recorder mode cancelled
When nn is not entered, the Master recorder
is selected.
Live/Playback image CMD:RmmVS ANS:RmmVSn Necessary when using a non-Panasonic
recorder with the Multiplexer board. 
Transmission command changes the monitor
display between live and playback image.
n=0 Live image
n=1 Playback image 
						

							158
Available only with the Multiplexer board
Transmission command toggles still display
ON or OFF.
mm=Monitor No.
cc=Camera No.
(cc=00 when toggling multiscreen still ON or
OFF)
n=0 OFF
n=1 ON
mm=Monitor No. FF ItemTransmission Command
(ASCII)Response (ASCII) Parameter (ASCII)
CMD:RmmFF ANS:RmmFF
REW CMD:RmmRW ANS:RmmRW mm=Monitor No.
Forward field advance CMD:RmmFA ANS:RmmFA mm=Monitor No.
Backward field advance CMD:RmmRA ANS:RmmRA mm=Monitor No.
Record CMD:RmmRC ANS:RmmRC mm=Monitor No.
Index CMD:RmmSC ANS:RmmSC
Still display CMD:RmmSTcc ANS:RmmSTccn
Search editing area CMD:RmmTMn ANS:RmmTMn Available only for Record List and
Thumbnail Display of WJ-HD500 Series
Transmission command toggles search edit-
ing area ON/OFF, or starts search.
mm=Monitor No.
n=0 OFF 
n=1 ON
n=2 Search startmm=Monitor No.
Transmission command changes the monitor
display between index and live image.
Setup control commands (refer to p. 154) are
available while the index is displayed.
Group select CMD:RmmTG ANS:RmmTG Available only for Record List and
Thumbnail Display of WJ-HD500 Series
Transmission command selects group to be
displayed.
mm=Monitor No.
Alarm search CMD:RmmAS ANS:RmmAS Available only for Record List and
Thumbnail Display of WJ-HD500 Series
Transmission command toggles alarm search
ON or OFF.
mm=Monitor No. 
						

							159
Alarm historyItemTransmission Command
(ASCII)Response (ASCII) Parameter (ASCII)
Model  No QID qid:WJ-SX150A Matrix switchers model  No.
Software version QRV qrv:*.**
/*.**
/*.**
/*.**
/*.**
/*.**qrv:*.**=Unit firmware version
/*.**= Master unit’s Multiplexer-board
firmware version
/*.**= Slave 1 unit’s Multiplexer-board
firmware version
/*.**= Slave 2 unit’s Multiplexer-board
firmware version
/*.**= Slave 3 unit’s Multiplexer-board
firmware version
/*.**= Slave 4 unit’s Multiplexer-board
firmware version
Inquiry
Video loss historyQAD
QVDqad:nnn:YYYYMMDD
hhmmss:cc:ee:s
qvd:nnn: YYYYMMDD
hhmmss:cc:ee:snnn=alarm-event total number
(000 to 100)
*=Event of  alarm n (n is a number).
Display pattern:
YYYYMMDDhhmmss:cc:ee:s
YYYY=Year
MM=Month
DD=Day
hh=Hour
mm= Month
ss=Second
cc=Alarm number (associated with the cam-
era number: 00 when the alarm is suspended)
ee= Event
00=ALARM
01=ACK
02=RESET
03=ALARM SUSPEND
s=Daylight saving time
0=OFF
1=ON
nnn=video-loss total number
(000 to 100)
*=Event of video loss n (n is a number).
Display pattern:
YYYYMMDDhhmmss:cc:ee:s
YYYY=Year
MM=Month
DD=Day
hh=Hour
mm= Month
ss=Second
cc=Video loss number (associated with the
camera number: 00  in case of  camera
switching pulse loss/recovery)
ee= Event
00=Video loss
01=Video loss recovery
02=Camera switching loss
03=Camera switching recovery
04=SLAVE DOWN
05=SLAVE RECOVER
s=Daylight saving time
0=OFF  1=ON 
						

							160
Alarm display–ALM:cc:a:yyyymmdd:hhmm
ss:ba=Event
0=ALARM
1=ACK
2=RESET
yyyy=Year
mm=Month
dd=Day
hh=Hour
ss=Second
b=Daylight saving time
0=OFF
1=ON ItemTransmission Command
(ASCII)Response (ASCII) Parameter (ASCII)
Miscellaneous Control 
						

							161
■Error Code List
Error code(ASCII) Error type Meaning
ER000 No error There is no error.
ER001 No associated command There is no associated command.
ER002 Parameter invalid The parameters number, digit and range are invalid. 
ER003 Receiver buffers overflow The receiver buffer has reached overflow capacity.
ER301 Command invalid Invalid operation mode caused the command error.
ER302 Parameter invalid The parameters number, digit and range are valid, but the operation mode
is invalid.
ER303 Gateway reception overflow Reception buffer overflow has occurred on the other device during the
gateway communication.
ER305 Gateway timeout error Timeout error has occurred during the gateway communication.
ER309 Internal error The internal processing error has happened.
Example:  The command is valid but it cannot be executed.
(1)  The unit receives the zoom command while selecting a camera without electronic zoom function. 
Transmission Command (ASCII)[STX] CMD:R01ZM [ETX]
Transmission Command (ASCII)[STX] ANS:R01ZM:ER301 [ETX]
●Matrix switcher and external devices 
						

							162
WORKSHEETS
Gathering information for the initial configuration and recording on the following worksheets are recommended. Then, if set-
tings need to be modified or updated later because of a change in surveillance needs or changes made in the systems com-
ponents, those worksheets can be used to track revisions to your system.
You should keep  all revised worksheets. Be sure to date them, in preparation for new entry or troubleshooting. Regardless of
the system size, the worksheets can track past, current, and future configurations.
■Instruction
Each worksheets title is the same as that of WJ-SX150A Administrator Console.
For example, the Operator Registration worksheet supports the Operator Registration window.
The worksheets rows, columns, and fields are arranged to match WJ-SX150A Administrator Console configuration require-
ments.
1. Reproduce the worksheets. You may need  dozens of copies.
2. Reproduce instructions for the configuration windows . You can attach the portions of instructions to the worksheets.
To keep record of the initial configuration of the system, date the Data Completed line on the top left of each sheet. 
						

							163
■Checklist
It is recommended that the worksheets be completed in the following sequence:
Date completed: ___/ ___/ ___
●Master-Slave 
●Logical Camera Number 
Camera LCN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Master ON
Slave 1 ON/OFF
Slave 2 ON/OFF
Slave 3 ON/OFF
Slave 4 ON/OFF
Master and Slave 1
Camera Slave 1LCN
Master
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Normal connection (one unit only)
Master, Slave 1 and Slave 2
Camera Slave 1LCN
Slave 2Master
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 
						

							164
Master and Slave 1 to 3
Camera Slave 1LCN
Slave 2Slave 3Master
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Master and Slave 1 to 4
Camera Slave 1LCN
Slave 2Slave 3 Slave 4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16