Panasonic Matrix Switcher Wj Sx150a Operating Instructions
Have a look at the manual Panasonic Matrix Switcher Wj Sx150a Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
104 LOG-IN AND LOG-OUT Before starting the following procedures, all system compo- nents must be turned on. The following procedures are applicable when the system controller is connected to the unit. ■ Log-in This operation is skipped when the auto log-in is set to ON. (Refer to p. 92.) 1. Turn on the power switches of all system components. The OPERATE indicator will light up. 2. To turn on the power of the system controller, connect the AC adapter to the AC outlet. The LINK indicator lights up and NO USER appears on the LED display of the system controller. 3. To select your registered operator ID number (1 to 16, up to 2 digits), press the numeric buttons, then press the CAM (SET) button. The underline appears on the LED display of the con- troller. The factory default setting is 150. 4. To select your registered password (up to 5 digits), press the numeric buttons, then press the CAM (SET) button. The factory default setting is 150. If the operator ID and password are correct, READY will appear on the LED display.Note:If an operator ID or password error occurs, the PROHIBITED indicator on the controller will blink and NO ACC will blink on the LED display for about 3 seconds. Then NO USER appears on the LED display. Return to Step 3 and select your oper- ator ID. MON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL Note:If the auto log-in is set to ON, any operator can login automatically. After the controller is turned on, AUTO appears on the LED display for approximately 2 sec- onds, then READY automatically appears.
105 ■ Log-out This operation is skipped when the auto log-out is set to ON. This function is used when an operator leaves the controller or no longer requires access to the system. 1. To logout from the system press the CLEAR button while holding down the SHIFT button. NO USER appears on the LED display of the con- troller. Notes: •If you want to save the power consumption, discon- nect the PC plug from the controller, and remove the AC adapter from the AC outlet. •If the auto log-out is set to ON, any operator can logout automatically if no operation takes place for a specific time. NO USER automatically appears on the LED display. •The time to logout is configurable through WJ- SX150A Administrator Console. [Refer to p. 92 Auto Login/Logout (Auto Log-in/Log-out).] SHIFT CALL PRESET PROGRAM PRESET PAUSE TOUR SEQ NEXT AUTO PAN PAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL ■ Auto Log-in If the auto log-in is set to ON, any operator can login auto- matically. After the controller is turned on, AUTO appears on the LED display for approximately 2 seconds, then READY automatically appears. Auto log-in is configurable through WJ-SX150A Administrator Console. [Refer to p. 92 Auto Login/Logout (Auto Log-in/Log-out).] ■ Auto Log-out If the auto log-out is set to ON and no operation takes place for a specific time, any operator can logout automatically. NO USER automatically appears on the LED display. Auto log-out and the time to logout are configurable through WJ-SX150A Administrator Console. [Refer to p. 92 Auto Login/Logout (Auto Log-in/Log-out).]
106 ■ Priority Lock ● Applying Priority Lock 1. Select the desired monitor. (Refer to Monitor Selection). 2. Press the MON (ESC) button while holding down the SHIFT button to toggle the priority lock mode on and off on the active monitor. If the priority lock mode is selected, the monitor number will inversely appear on the active monitor as shown in the figure. Note:This function will prevent operators with lower priority from gaining control of a monitor. However, higher or equal priority operators may still gain control of the monitor. M04 SHIFT PAUSE TOUR SEQ NEXT PAUSE MON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL ● Releasing Priority Lock 1. Select the desired monitor. (Refer to Monitor Selection.) 2. Press the MON (ESC) button while holding down the SHIFT button to release the priority lock mode. The monitor number returns to the normal display on the active monitor. After the log-in procedure, the following operations are available to control the system. The operation begins with selecting a monitor, then the selected camera appears the active monitor. ■ Monitor Selection 1. To select the desired monitor number (1 to 4), press the numeric button. 2. Press the MON (ESC) button to execute the selection. The MONITOR indicator on the controller will light up and the selected monitor number will appear on the LED display of the controller. 3. If the selected monitor number is not valid, the PROHIB- ITED indicator lights up and the number on the LED dis- play will blink for approximately 3 seconds. Return to Step 1 and select a new monitor number. Note:The PROHIBITED indicator will blink if an opera- tor with higher priority is controlling the monitor.Control of the same monitor is denied to an operator with lower priority. MON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL MONITOR SELECTION AND CAMERA SELECTION
107 ■ Camera Selection 1. Select the desired monitor. (Refer to p. 106 Monitor Selection.) 2. Press the numeric buttons to select the desired camera number (1 to 99). 3. Press the CAM (SET) button. The selected cameras image will appear on the active monitor. The CAMERA indicator will light up and the selected camera number will appear on the LED dis- play on the controller. SETUP SHIFT REW/FF STEP GROUP SEQ PAUSE SUSPEND F1 CAM SETUPALL RESET ACKRESET F2 TOUR SEQ PREVNEXT STOP OSD RECORDER INDEX STOP PLAYPAUSE Note:If you select a wrong number, press the CLEAR button to clear the input. 4. If the selected camera number is not valid, the PRO- HIBITED indicator and the number on the LED display will blink for about 3 seconds. Return to Step 2 and select a new camera number. 5. To replace the currently selected camera with the next higher-numbered camera , press the NEXT button. 6. To replace the currently selected camera with the next lower-numbered camera, press the PREV button. Note:The PROHIBITED indicator will light up, if the camera is selected by an operator with higher prior- ity. Control of the same camera is denied to an operator with lower priority.
108 Buttons and control for cameras or camera site accessories are located on the right side of the front panel of the system controller. Included are zoom control, focus control, iris control, preset and pan/tilt controls. Normally, combination cameras equipped with the specific feature or a WV-RC100 or WV-RC150 Receiver are required to utilize these functions. Note:Refer to the cameras operating instructions whether to confirm that each function is available. ■ Lens Control This function is available when specified lens, with motor- ized zoom/ focus functions, is mounted on the camera, and the lens selection (DC/VIDEO) on the camera is set to DC. 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the FOCUS NEAR/FAR buttons while watching the monitor. The lens focus is adjusted to obtain a sharply focused image. To set the lens focus automatically, press these buttons simultaneously. Pressing the top button of WV-CU360CJ can also set the lens focus automatically. 3. Press the ZOOM WIDE/TELE buttons while watching the monitor. The lens iris is adjusted to obtain the desired image. Press the TELE button to bring an object optically clos- er. Press the WIDE button to widen the scene optically.Moving the zoom wheel controller of WV-CU360CJ can also adjust the lens zoom. 4. Press the IRIS CLOSE/OPEN buttons to close/open the lens iris. The lens iris is adjusted by these buttons to obtain the proper image exposure. To reset to the factory default setting, press these but- tons simultaneously. ■ Pan/Tilt Control ● Manual Operation 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Move the joystick to move the pan/tilt head towards the desired direction. ● Auto Panning 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. To activate the auto panning function of the selected camera, press the AUTO PAN button. 3. To cancel the auto panning function, move the joystick. CAMERA CONTROL AUTO FOCUS NEARFA R FOCUS WIDE TELE ZOOM REC IRIS CLOSE OPEN AUTO IRIS UP LR DOWN AUTO PAN CAM FUNC Top button WIDE TELE Zoom wheel controller
109 ■ Call Preset Position 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. To select the desired preset position number, press the numeric buttons. (1 to 64) 3. When you have selected a wrong number, press the CLEAR button to clear the numeric input. 4. Press the CALL PRESET button to move to the preset position of the selected camera on the active monitor. ■ Program Preset Position 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. To move the camera to the position to be preset, move the joystick and press the lens control buttons. 3. To select the desired preset position number, press the numeric buttons. (1 to 64) 4. When you have selected a wrong number, press the CLEAR button to clear the numeric input. 5. Press the CALL PRESET button while holding down the SHIFT button to save a preset position of the selected camera. SHIFT CALL PRESET PROGRAM PRESET PAUSE TOUR SEQ NEXT AUTO PAN PAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL Notes: •If the entered position number has stored the previ- ous preset position, it will be overwritten by the new one. •SETUP MENU and WJ-SX150A Administrator Console can configure each operators pan/tilt con- trol. (Refer to p. 76 OPERATOR REGISTRATION or p. 90 Operator Registration.)Notes: •To use the above function, you must set the preset position number for the camera. •If you press no numeric buttons or the button 0 in Step 2, the camera will move to the home position. CALL PRESET PROGRAM PRESET AUTO PAN CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL
110 ■ Camera Function (Shortcut Function) The following function is available only when specified cam- eras with the camera function feature are used. This function enables executing camera functions via a shortcut. 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the AUTO PAN button while holding down the SHIFT button. F_ _ _ _ will appear on the LED display of the con- troller as shown in the figure. ■ Camera Setup 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the F1 button while holding down the SHIFT but- ton. The CAM SETUP indicator on the controller will light up and the cameras SETUP MENU will appear on the active monitor. 3. To select the desired item in the menu, move the joy- stick to ▼or ▲. To select the desired parameter (or mode) in the menu, move the joystick to tor s. 4. To execute the currently highlighted selection and to enter a submenu of SETUP MENU, press the CAM (SET) button. 5. To leave from the currently selected menu and to return to the previous page of the menu, press the MON (ESC) button. 6. Move the cursor to SPECIAL on the camera’s setup menu, and press numeric buttons 4and 6simultane- ously for 2 seconds or more to display the special menu. 7. Move the cursor to CAMERA RESET on the camera’s setup menu, and press buttons 4, 5and 6simultane- ously to reset all the functions to the defaults. Notes: •Refer to the operating instructions of the selected camera for details. •Move the joystick while holding down the SHIFT button to move the camera smoothly for presetting the positions in the cameras SETUP MENU. 8. To close the cameras SETUP MENU, press the F1 but- ton while holding down the SHIFT button. The CAM SETUP indicator goes off. CAMERA FUNCTION CONTROL SETUP SHIFT REW/FF STEP CALL PRESET PROGRAM PRESET GROUP SEQ PAUSE SUSPEND F1 CAM SETUPALL RESET ACKRESET F2 TOUR SEQ PREVNEXT STOP OSD AUTO PANRECORDER INDEX STOP PLAYPAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL 3. Press the numeric buttons to select an assigned func- tion number, then press the CAM (SET) button. For example, enter 175 for AGC ON. The selected function will be executed on the active monitor. Notes: •When you select a wrong number, press the CLEAR button to clear the numeric input. •Refer to the cameras operating instructions for details on available shortcuts. 4. To exit from the mode, press the MON (ESC) button then press the AUTO PAN button while pressing the SHIFT button. SETUP SHIFT REW/FF STEP CALL PRESET PROGRAM PRESET GROUP SEQ PAUSE SUSPEND F1 CAM SETUPALL RESET ACKRESET F2 TOUR SEQ PREVNEXT STOP OSD AUTO PANRECORDER INDEX STOP PLAYPAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL
111 ■ Patrol Learn and Play A routine of manual operations can be stored for a specific time and later reproduced repetitively. 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the AUTO PAN button three times while holding down the SHIFT button. LEARN will appear on the LED display of the controller as shown in the figure. ■ Changing to Black and White Images This function gets the clear camera images on the monitor while shooting the objects under low light conditions. 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the AUTO PAN button two times while holding down the SHIFT button. BLACK (black) will appear on the LED display of the controller as shown in the figure. 3. Press the button 1 to change the image from the color mode to the black and white mode on the active moni- tor. BL ON (BLACK ON) appears on the LED display to indicate the selected mode. 4. Press the button 2 to change the black and white image to the color image on the active monitor. BL OF (BLACK OFF) appears on the LED display to indicate the selected mode. 5. Press the MON (ESC) button to exit from the mode. Note:When the black and white parameter is set to AUTO in the cameras SETUP MENU, this function is disabled. SETUP SHIFT REW/FF STEP CALL PRESET PROGRAM PRESET GROUP SEQ PAUSE SUSPEND F1 CAM SETUPALL RESET ACKRESET F2 TOUR SEQ PREVNEXT STOP OSD AUTO PANRECORDER INDEX STOP PLAYPAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL SETUP SHIFT REW/FF STEP CALL PRESET PROGRAM PRESET GROUP SEQ PAUSE SUSPEND F1 CAM SETUPALL RESET ACKRESET F2 TOUR SEQ PREVNEXT STOP OSD AUTO PANRECORDER INDEX STOP PLAYPAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL 3. To save the patrol sequence, follow the procedure below. qPress the button 2, then press the CAM (SET) but- ton. LE r appears on the LED display. wOperate the camera manually. ePress the button 3. The operation data is saved and LE S appears on the LED display. 4. To reproduce the operation data, follow the procedure below. qPress the button 1. LE P appears on the LED display. wPress the button 3. The reproduction is ended. 5. To exit from the mode, press the MON (ESC) button.
112 ■ Camera Panning Function There are three panning modes available as follows: auto pan, sort mode and sequence mode. Refer to p. 16 Camera-related Functions for details on each mode. 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the AUTO PAN button four times while holding down the SHIFT button. PAN will appear on the LED display of the controller as shown in the figure.4. To exit from the mode, press the MON (ESC) button, then press the AUTO PAN button while holding down the SHIFT button. SETUP SHIFT REW/FF STEP CALL PRESET PROGRAM PRESET GROUP SEQ PAUSE SUSPEND F1 CAM SETUPALL RESET ACKRESET F2 TOUR SEQ PREVNEXT STOP OSD AUTO PANRECORDER INDEX STOP PLAYPAUSE CAM FUNC CLEAR LOG OUTMON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL 3. Press the assigned numeric button shown below to acti- vate the panning function of the selected camera. The LED display indicates the selected mode as fol- lows. 1:Activates AUTO PAN PA PA. 2:Activates SORT PAN PA SO. 3:Activates SEQUENCE PAN PA SE. Note:The AUTO MODE parameter previously set in the cameras SETUP MENU will be automatically replaced to the activated function parameter.
113 ■ Receiver Control The following functions are available only when the receivers are included in the system and the specified camera housing is installed. ● Camera Housing Control Wiper Control 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the CAM (SET) button while holding down the SHIFT button to turn on the housing wiper of the camera until buttons are released. Defroster Control 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the button 9 while holding down the SHIFT button to turn on the housing defroster of the camera. 3. To turn off the defroster, press the button 8 while hold- ing down the SHIFT button. ● Auxiliary Control 1. Select the desired monitor and camera. (Refer to p. 106 Monitor Selection and p. 107 Camera Selection.) 2. Press the button 3 while holding down the SHIFT button to turn on the users auxiliary switch 1 of the receiver. Press the button 2 while holding down the SHIFT but- ton to turn off the users auxiliary switch 1 of the receiv- er. 3. Press the button 6 while holding down the SHIFT button to turn on the users auxiliary switch 2 of the receiver. Press the button 5 while holding down the SHIFT button to turn off the users auxiliary switch 2 of the receiver. SHIFT PAUSE TOUR SEQ NEXT PAUSE MON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL SHIFT PAUSE TOUR SEQ NEXT PAUSE MON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL SHIFT PAUSE TOUR SEQ NEXT PAUSE MON LOCK DEF ON WIPER DEF OFFMON (ESC) T&D CAM ID MON STATUSALLEVENT ALM H VLD H SYS S CAM (SET) MULTI SCREEN SEL SEQUENCE AUX2 ON AUX2 OFFEL-ZOOM AUX1 ON AUX1 OFFSTILL CAMERA SITE ACCESSORIES CONTROL