Panasonic Kx Tgm430 Operating Instructions Manual

stop the snooze function before making the
c
all. Silent mode
S
 ilent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Using the phonebook’s group feature
(page 48), you can also select groups of
callers whose calls override silent mode and
ring the unit (Caller ID subscribers only)....

Registering a unit
O
perating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 5 for information on the available
model.
Registering a handset to
the base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
1 Handset:
MMENU N#130
2 Base unit:
Press and hold  MLOCATOR/INTERCOM N
for about 5 seconds.
R If all registered handsets start ringing,...

Using Caller ID service
I mportant:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
–“Out of area ”: The caller...

3
To call back, press  MSELECT N.
To exit, press  MOFF N.
4 MCELL N
R The unit starts dialing immediately
in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 37).
5 Mb N: Select the desired cellular phone.
a  M SELECT N
n Using a landline
1 MC N CID
2 Press  MC N to search from the most
recent call, or  MD N to search from the
oldest call.
3 To call back, press  MTALK N.
To exit, press  MOFF N.
Note:
R If the entry has already been viewed...

Erasing all caller
i
nformation
1 MC N CID
2 MERASE N a  M b N:  “Yes ” a  M SELECT N
a  M OFF N
For assistance, please visit http://shop.panasonic.com/support 65Caller ID Service
TGM43x(en)_0426_ver031.pdf   652016/04/26   10:55:19 

Copying phonebook
f rom a cellular phone
(phonebook transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s phonebook. A cellular
phone must be compatible with Bluetooth
wireless technology.
Important:
R Your cellular phone must support Phone
Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name....

–
“Trunk prefix ”: A trunk prefix; the initial
digit(s) to be dialed in a domestic call, prior
to the area code.
1 MMENU N
2 To store  “International code ”:
#117
To store  “Country code ”:  #118
To store  “Trunk prefix ”:  #119
3 Enter the desired number.  a M SAVE N
a  M OFF N
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly. Link to Cell app
For Android™ users The free Link to Cell app helps you integrate
y

our Android phone with your DECT phone for
convenient...

–
Android phone:  [Application Alerts
manager] *1
 must be turned on.
– Handset:  “ Alert On/Off ” must be
turned on (page 68).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and remove the batteries
from the base unit. Then, reconnect AC
adaptor and insert the batteries into the
base unit.
*1 Turning on  [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s
[Settings]...

2
Mb N: Select the desired setting.  a
M SAVE N a  M OFF N
Selecting the alert tone
1 For CELL 1:  MMENU N#6041
For CELL 2:  MMENU N#6042
2 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N Using a Bluetooth
h
 eadset (optional)
By pairing a Bluetooth headset to the base
unit, you can enjoy hands-free conversations
when talking on landline calls.
Important:
R Your Bluetooth headset must support the
Headset Profile (HSP) specification.
R Only 1 Bluetooth headset can be paired to
the base unit.
R...

Operating a Bluetooth
h
eadset using a landline
Important:
R Refer to your headset’s operating
instructions for details.
Making landline calls with your
headset Base unit
1 P

ress your headset’s button referring to
your headset’s operating instructions.
2 Press the desired memory dial key ( MM1 N
to  MM3 N).
3 When you finish talking, press your
headset’s button referring to your
headset’s operating instructions.
Note:
R If you cannot hang up the call using your
headset, press  MZ N on the base unit 2...