Panasonic Kx Tgm430 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx Tgm430 Operating Instructions Manual. The Panasonic manuals for Cordless Telephone are available online for free. You can easily download all the documents as PDF.
Page 81
Error messages Display message Cause/solution Ask phone c ompany for VM access # R You have not stored the voicemail access number. Store the number (page 78). Busy RN o cellular phone is paired to the base unit. Pair a cellular phone (page 34). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R Only 2 Bluetooth devices can be used with the unit at the same time (for...
Page 82
Display message Cause/solution Use r echargeable battery. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 9. Troubleshooting I f you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. If the base unit batteries for power backup are...
Page 83
Problem Cause/solution I cannot connect a cellular p hone to the base unit. R Confirm that your cellular phone is turned on. RConfirm that your cellular phone is within base unit range (page 21, 34). R Your cellular phone’s Bluetooth feature is turned off. Turn it on. R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on. You can connect to the base unit manually (page 36). R The...
Page 84
Accessibility Problem Cause/solution I cannot search the p honebook, caller list, redial list, memory dial, or call block list. R Other units are in use and the system is busy. Try again later. The unit does not announce n ames or phone numbers when I search the phonebook, caller list, etc. R The default setting for the talking keypad and phonebook feature is “Off ”. Change the setting (page 29). R Other units are in use and the system is busy. Try again later. The announcement is in a l anguage I...
Page 85
Problem Cause/solution I fully charged the batteries, but – still flashes, – is displayed, or – the operating time seems to be shorter. R C lean the battery ends ( , ) and the charge contacts w ith a dry cloth and charge again. R It is time to replace the batteries (page 15). Making/answering calls, intercom Problem Cause/solution is displayed. R T he handset is too far from the base unit. Move closer. RThe base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The...
Page 86
Problem Cause/solution I cannot make or answer c ellular calls with the handset or base unit. R Depending on the cellular phone’s compatibility (page 5), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up on the base unit and is displayed on the handset (page 21, 22). R M ake sure that the cellular phone is connected to the base unit (page 36). R Only 2 Bluetooth devices can be used with the unit...
Page 87
Problem Cause/solution Caller information is displayed o r announced late. R Depending on your phone service provider, the unit may display or announce the caller’s information at the 2nd ring or later. R Move closer to the base unit. Caller information is not a nnounced. R The ringer volume for landline is turned off. Adjust the ringer volume (page 55). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 53). R The unit which is not selected to ring for cellular calls...
Page 88
Using Bluetooth devices Problem Cause/solution I cannot copy phonebook e ntries from a cellular phone. R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone. R Someone is using a cellular line or Bluetooth...
Page 89
Problem Cause/solution App alert is not displayed or a nnounced. or Text message alert is not displayed or announced. R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. R Confirm that the [Application Alerts manager] setting of your Android phone is turned on. R “Alert On/Off ” is set to “Off ”. Set it to “On ” (page...
Page 90
Problem Cause/solution The unit does not emit the s pecified number of rings. R If the first ring is turned off ( “No ”) (page 46), the number of rings decreases by 1 from the specified number of rings. Bluetooth PIN Problem Cause/solution I cannot remember the PIN. RC hange the PIN using the following method. 1 MMENU N#619 2 *7000 3 Enter the new 4-digit PIN. a M OK N 4 Enter the new 4-digit PIN again. a M SAVE N a M OFF N Voicemail Problem Cause/solution “ V oicemail msg. via phone co. ” is shown on...