Panasonic Kx Tgm430 Operating Instructions Manual

Flash for landline calls
Handset / Base unit
M F
LASH N on the handset or  MFLASH/CALL
WAIT N on the base unit allows you to use the
special features of your host PBX such as
transferring an extension call, or accessing
optional telephone services.
Note:
R To change the flash time, see page 58.
For call waiting or Call Waiting Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you...

n
While another unit is on a landline call:
To join the conversation, press  MTALK N. Base unit
T

o join the conversation, select the line that is
being used for the call:
– for a cellular line press  MCELL 1 N or  MCELL
2 N.
– for the landline press  MZ N.
Note for handset and base unit:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.  (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode...

1
During a conversation using a cellular
phone, press  MCELL N.
R The call is transferred to the
handset in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 37).
2 Mb N: Select the corresponding cellular
phone.  a M SELECT N
R The call is transferred to the
handset.
n From the base unit to a cellular phone
During a cellular call, press and hold
M CELL 1 N or  MCELL 2 N until the
SP-PHONE indicator goes out.
R The cellular call is...

Making an intercom call
Handset
1 MM
ENUN a  M b N:  “Intercom ” a
M SELECT N
2 Mb N: Select the desired unit or  “Voice
paging ”.  a  M SELECT N
R If you select  “Voice paging ”, speak
into the microphone after the beep.
Your voice will be heard from the
speakers of the base unit and all
handsets. Voice paging ends when
you press  MOFF N or when a handset
user or base unit user answers your
voice page.
3 When you finish talking, press  MOFF N.
Note:
R You can also use the  MINTERCOM N soft
key, if...

Call block
I n the following situations, you can disconnect
the current call and add the caller’s phone
number to the call block list.
– When an outside call is being received
– When an outside caller’s message is being recorded
– When you are talking on an outside call
1 When an outside call is being received
or
When an outside caller’s message is
being recorded
Press  MBLOCK N on the handset.
When you are talking on an outside call
M MENU N a  M b N:  “Blocked call ” a
M SELECT N
2 Confirm the call...

Press 
MEDIT N repeatedly until the
phone number is shown in the
10-digit format.  a M SAVE N a  M b N:
“ Call block ” a  M SELECT N a
Go to step 4.
3 Mb N:  “Save call block ” a
M SELECT N
4 Mb N:  “Yes ” a  M SELECT N
5 Edit the phone number if necessary
(24 digits max.).  a M SAVE N a  M OFF N
Adding call blocked numbers
manually
1 MMENU N#217
2 Mb N:  “Block a single number ” a
M SELECT N
3 MMENU N a  M b N:  “Add ” a  M SELECT N
4 Enter the phone number (24 digits max.).
a M SAVE N a  M OFF N...

Phonebook
Y ou can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 48). The
following groups are available:
– Group 1:  “Home ”*1
 (default)
– Group 2:  “Cell 1 ”*1
– Group 3:  “Cell 2 ”*1
– Group 4-9: You can change the group name for each group.
*1 For groups 1-3, the group names cannot be changed.
Important:
R All entries can be shared by any registered
handset.
R You can copy phonebook entries from a...

2
Mb N: Select the desired entry.  a
M SELECT N
R To edit the number, press  * (Edit)
repeatedly until the phone number
is shown in the desired format.
3 MSAVE N
4 Mb N:  “Phonebook ” a  M SELECT N
5 Continue from step 3, “Editing entries”,
page 49.
n When a cellular phone is not paired:
1 MC N CID
2 Mb N: Select the desired entry.  a
M MENU N
R To edit the number:  Mb N:  “Edit ” a
M SELECT N
Press  MEDIT N repeatedly until the
phone number is shown in the
desired format.  a M SAVE N a  M b N:
“...

M
b N: Select the desired cellular
phone.  a M SELECT N
n Using a landline:
M TALK N
Editing entries
1 Find the desired entry (page 48).
2 MMENU N a  M b N:  “Edit ” a  M SELECT N
3 Edit the name if necessary.  a M OK N
4 Edit the phone number if necessary.  a
M OK N
5 Mb N: Select the desired group (page 48).
a  M SELECT N 2 times  a M OFF N
Erasing entries
Erasing an entry
1 Find the desired entry (page 48).
2 MMENU N a  M b N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Erasing...

Editing an entry
1
P
ress and hold the desired memory dial
key ( 1 to  9). a  M MENU N
2 Mb N:  “Edit ” a  M SELECT N
3 Edit the name if necessary.  a M OK N
4 Edit the phone number if necessary.  a
M OK N a  M SELECT N a  M OFF N
Erasing an entry
1 Press and hold the desired memory dial
key ( 1 to  9). a  M MENU N
2 Mb N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Viewing an entry/Making a
call using the handset
n Using a cellular line:
1 Press and hold the desired memory
dial key...