Panasonic Kx Tgf380 Operating Instructions Manual

Phonebook
Y ou can add 3,000 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook, and assign each phonebook entry to
the desired group (page 32). The following
groups are available:
– Group 1:  “Home ”*1
 (default)
– Group 2:  “Cell 1 ”*1
– Group 3:  “Cell 2 ”*1
– Group 4-9: You can change the group name for each group.
*1 For groups 1-3, the group names cannot be changed.
Important:
R All entries can be shared by the base unit and
any registered handset.
R You can copy...

2
Mb N: Select the desired phone number.  a
M MENU N
3 Mb N:  “Save ” a  M SELECT N
4 To store the name, continue from step 3,
“Editing entries”, page 33.
n When a cellular phone is not paired:
1 ME N REDIAL
2 Mb N: Select the desired phone number.  a
M SAVE N
3 To store the name, continue from step 3,
“Editing entries”, page 33. Base unit
1 MR

EDIAL N
2 Mb N: Select the desired phone number.  a
M SAVE N
3 To store the name, continue from step 3,
“Editing entries”, page 33. Storing caller information to...

Handset
1 MC
ELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 19).
2 Mb N: Select the desired cellular phone.  a
M SELECT N Base unit
P

ress  MCELL 1 N or  MCELL 2 N.  a  Lift the corded
handset.
n  Using a landline: Handset
M N
Base unit
L

ift the corded handset. Scrolling through all entries
Handset / Base unit
1 P

roceed with the operation for your unit.
Handset:  M F N  Base unit:
 M N
2 Mb N:

 Select the desired entry....

2
MERASE N a  M b N:  “Yes ” a  M SELECT N a
M EXIT N Erasing all entries
Handset / Base unit
1 P

roceed with the operation for your unit.
Handset:  M F N   
a  M M
ENU N
Base unit:  M N
 a  M MENU N
2 Mb N:  “Erase all ” a  M SELECT N
3 Mb N: Select the desired group.  a M SELECT N
4 Mb N:  “Yes ” a  M SELECT N
5 Mb N:  “Yes ” a  M SELECT N
6 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N Chain dial
T
 his feature allows you to dial phone numbers in
the phonebook while...

4
MSAVE N a  M EXIT N
Note for handset and base unit:
R If you edit a phonebook entry which is assigned
to a speed dial key, the edited entry does not
transfer to the speed dial key.
Note for base unit:
R You can also select the desired entry as follows:
– Press and hold the desired speed dial key ( 1
to  9 ).
– Press  MSPEED DIAL N and then enter the
desired speed dial key ( 1 to  9). Editing an entry
Handset
1 P

ress and hold the desired speed dial key ( 1
to  9 ). a  M MENU N
2 Mb N:  “Edit ” a  M...

handset. After the handset answers the page,
p
lace the corded handset on the cradle to
complete the transfer. Adding phone numbers for outside
c

alls Base unit
n B

y entering phone numbers:
1 Press and hold the desired one-touch dial
button (1 to 3).  a M EDIT N
2 Enter the party’s name (16 characters
max.).  a M OK N
3 Enter the party’s phone number (24 digits
max.).  a M OK N
4 MSELECT N a  M EXIT N
n From the phonebook:
1 Press and hold the desired one-touch dial
button (1 to 3).
2 M N
3 Mb N:...

Menu list
T
o access the features, there are 2 methods. Handset / Base unit
n S

crolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R The unit...

Sub-menu 1 Sub-menu 2 Settings Code Unit
Greeting
Record greeting* 1
–#302 / 57
Check greeting –#303 / 58
Pre-recorded *
 1
(Reset to pre-recorded greeting) –
#304 / 57
New message
a
 lert *1 Outgoing call
–
O
n/Off On
<
O
ff > #338 / 60
Outgoing call
– N

otification to –
Outgoing call
– R

emote code Activate
<
I
nactivate >
Base unit beep On  #339 / 59
Settings Ring count*
 1
2-7 rings

Toll saver #211 / 62
Recording time *
 1
1 min

Greeting only *2#305 / 63
Remote code *
 1
 #306 / 61
Screen call...

Main menu:   “
Bluetooth ”Sub-menu 1 Sub-menu 2 Settings Code Unit
Link to cell
–
1

:Add new
device *4
(for CELL 1)
– 2:Add new
device *4
(for CELL 2) Connect
* 1
/
Disconnect *1 –
#6251* 5 / 18
#6252 *
 6
Ringer volume Off -
6 
#6281* 5 / 21,
25
#6282 *
 6
Ringer tone *
 7
*5
< Tone 4 >*6 #6291
* 5 –
#6292 *
 6
Select unit to
r
 ing *1 Handset 1-6
<
A
ll > #6271
* 5 / 17
#6272 *
 6
Ring as cell
(
 limited) *1 <
On (with Talking
CID) >
On (without
Talking CID)
Off #6141
* 5 / 17
#6142 *
 6
Alert...

Sub-menu 1 Sub-menu 2 Settings Code Unit
Settings
Auto connect* 1

3 min
5 min
10 min
Off #632 / 17
Cell area code *
 1
–#633 / 19
Cell line only
m
 ode *1 On
<
O
ff > #157 / 18
Cell line select
(
 Handset) <
Manual >
Cellphone 1 *4
Cellphone 2 *4#634 19
Cell line select
(
 Base unit) <
Cellphone 1 >*4
Cellphone 2 *4#634 Set PIN
*
 1
 #619 / 19
International
c
 ode *1 –
#117 / 52
Country code *
 1
–#118 /
Trunk prefix
*
 1
–#119 /
Main menu:   “
S
et date & time ”Sub-menu 1 Sub-menu 2 Settings Code Unit...