Panasonic Kx Tgf380 Operating Instructions Manual

use the base unit display, phonebook,
o
ne-touch dial, answering system,
speakerphone, Bluetooth functions, etc.)
The base unit display is blank.
– “Off ” (default): You can use the full functions
of the base unit, but battery life is not extended.
The brightness level for the base unit display is
lowered. Base unit
1 MM

ENUN#150
2 Mb N: Select the desired setting.
3 MSAVE N a  M EXIT N
Note:
R Once the battery saving mode is set to  “On ”,
the unit rings with the volume level 1 even if the
ringer...

Controls
Handset
Belt clip holes
Speaker
M N
 (TALK) Headset jack
Dial keypad (
*:
  TONE)M
Z N (SP-PHONE: Speakerphone) Microphone
Receiver
Display
M
O
FF N M
FLASH N M CALL WAIT NM
CALL BLOCK NCharge contacts
n C
ontrol type  
S
oft keys
By pressing a soft key, you can select the
feature shown directly above it on the display.
After a cellular phone is paired,  MCELL N is
displayed.  
N
avigator key –
MD N,
  MC N,  MF N, or  ME N: Scroll through various
lists and items.
– VOL. (Volume:  MD N or  MC...

CELL 1 indicator
M
CELL 2 N
CELL 2 indicator M N
 
(ANSWER ON/OFF)
ANSWER ON/OFF indicator M
C
ALL BLOCK NM N
 (PLAY/STOP)
Message indicator Desk stand/Wall mounting adaptor
R
T

he adaptor is a removable attachment for
desk stand or wall mounting use
(page 65).
n Control type  Soft keys
B

y pressing a soft key, you can select the
feature shown directly above it on the display.  Navigator key
– MD N,

 M C N,  M N
, or  M N
: Scroll through
various lists and items.
– VOL. (Volume:  MD N or  MC N):...

Base unit display items
Item Meaning
The landline is in use.
R
W
hen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received. A cellular line is in use.
*
 1
R When flashing:
The cellular call is put on hold.
R When flashing rapidly:
A cellular call is being received. Ringer volume is off.
*
 2
 (page 39,
41) Silent mode is on. (page 45)
Call sharing mode is off.
(
 page 43) “
G
reeting only ” is selected.
Caller messages are not recorded.
(page 63) – A cellular...

Handset / Base unit
1 MM
ENUN#112
2 Mb N: Select the desired setting.  a M SAVE N
3 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N Date and time
Y
 ou can configure this setting using either the
base unit or one of the handsets. Handset / Base unit
1 MM

ENUN#101
2 Enter the current month, date, and year by
selecting 2 digits for each.
Example:  July 12, 2015
07  12  15
3 MOK N
4 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each....

Link to cell feature
Y ou can connect your base unit and cellular phone
using Bluetooth wireless technology, so that you
can make or answer cellular calls using your
phone system. This allows you to:
– use the unit to talk on cellular calls even if some areas of your home have poor cellular
reception, simply by placing your cellular phone
in an area with good reception.
– talk on cellular calls even if your cellular phone is in your pocket or bag.
– enjoy cordless cellular calls even if your cellular...

Link to cell settings
Selecting which unit receives cellular
c alls
You can select which unit rings and receives calls
for a cellular line. When  “All ” is selected, all
handsets and the base unit ring.
You can configure this setting using either the
base unit or one of the handsets. Handset / Base unit
1 F

or CELL 1:  MMENU N#6271
For CELL 2:  MMENU N#6272
2 Mb N: Select the desired handset or  “All ”.  a
M SAVE N
3 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
Note:...

Important:
R
W
hen 3 Bluetooth devices (2 cellular phones
and 1 headset) are paired to the base unit, only
2 Bluetooth devices can be used with the unit at
the same time, and the base unit loses its
connection from other Bluetooth devices. To
automatically resume the connection to
Bluetooth devices, leave the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of your
cellular phone for more details. Handset / Base unit
1 MM

ENUN#632
2 Mb N: Select the...

When you use the landline again
B
efore connecting the telephone line to the base
unit, select  “Off ” in step 2, “Cellular line only
mode (If you do not use the landline)”, page 18. Cellular line selection
T
 his feature determines which cellular line is
selected to make cellular calls when:
– you press  MCELL N on the handset.
– you press  M N
 
or  MZ N on the handset while the
cellular line only mode is turned on.
– you lift the corded handset or press  MZ N on the
base unit while the cellular line...

Making cellular calls
I mportant:
R The unit can be used to talk on 2 lines at the
same time (for example, 2 cellular lines, or the
landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with the
unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
R Before making calls, confirm that the
corresponding   on the handset is displayed
(

page 13).
1 Lift the handset and dial the phone number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The unit...