Panasonic Kx Tgf380 Operating Instructions Manual

Operating Instructions
Digital Corded/Cordless Phone with Link-to-Cell
Model No.KX-TGF380
KX-TGF382
KX-TGF383
 
   
   
 
   Model shown is KX-TGF380.
Before initial use, see “Getting Started” on
page 9.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for future
reference.
Consulte  “Guía Rápida Española”, página 78.
For assistance, visit our Web site: 
http://shop.panasonic.com/support   for customers in the
U.S.A. Please...

Introduction
Model composition 
..............................................3
Accessory information  ........................................3
Important Information
For your safety ....................................................6
Important safety instructions ...............................7
For best performance .........................................7
Other information ................................................7
Specifications ......................................................
8...

Model composition
Series Model No. Base unit Handset
Part No. Part No. Quantity
KX-TGF380 series KX-TGF380 KX-TGF380 KX-TGFA30 1
KX-TGF382 KX-TGF380 KX-TGFA30 2
KX-TGF383 KX-TGF380 KX-TGFA30 3Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
KX-TGF380 KX-TGF382 KX-TGF383
A AC adaptor/PNLV226Z 111
B Telephone line cord * 1
111
C Desk s
tand/Wall mounting adaptor *2
/PNKL1051Z1 1
11
D Corded handset/PNLXP1005Y 111
E Corded handset cord/PQJA212V 111
F Rechargeable batteries...

Additional/replacement accessories
P
lease contact your nearest Panasonic dealer for sales information (page 88). Accessory item Model number/Specifications
Rechargeable batteries HHR-4DPA*
 1
R To order, please visit http://shop.panasonic.com/support
Battery type:
–
 Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
T-adaptor KX-J66
Range extender KX-TGA405*
 2
Key detector KX-TGA20*
 3*1 Replacement batteries may have a different...

*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details
a nd the list of compatible cellular phones, please visit our Web site: www.panasonic.com/link2cell Trademarks
R
T

he Bluetooth ®
 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Panasonic Corporation is under license.
R iPhone is a registered trademark of Apple Inc.
R Android is a trademark of Google Inc.
R Gmail, Google Calendar are trademarks...

For your safety
T
o prevent severe injury and loss of life/property, read this
section carefully before using the product to ensure
proper and safe operation of your product. WARNING
Power connection
R
U

se only the power source marked on the product.
R Do not overload power outlets and extension cords.
This can result in the risk of fire or electric shock.
R Completely insert the AC adaptor/power plug into the
power outlet. Failure to do so may cause electric shock
and/or excessive heat resulting in a...

Note when using alkaline batteries for power backup
R
T
he batteries should be used correctly, otherwise the
unit may be damaged due to battery leakage.
R Do not charge, short-circuit, disassemble, or heat the
batteries.
R Do not dispose of batteries in a fire.
R Remove all the batteries when replacing.
R Do not mix old, new or different types of batteries.
R It is recommended that batteries are replaced annually.
R It is recommended that batteries are replaced after a
power outage. Important safety...

Specifications
R
S
tandard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
Bluetooth wireless technology 2.1
R Frequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.8 W
Maximum: Approx. 3.0 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air
humidity (dry)
8 For...

Setting up
Connections
R
I
f you do not connect the telephone line cord
and use only cellular lines, set the cellular line
only mode to use this unit more conveniently
(page 18).
n  Base unit Connect the AC adaptor to the unit by
p

ressing the plug firmly. Connect the telephone line cord to the unit
u

ntil you hear a click. Fasten the AC adaptor cord and the telephone
l

ine cord by hooking it. Connect the AC adaptor to the power outlet.
Connect the telephone line cord to the
s

ingle-line telephone...

Handset battery level
Icon Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery performance
(
supplied batteries) Operation Operating time
In continuous use 13 hours max.*
 1
Not in use (standby) 12 days max.*
 1*1 If eco mode is on.
N

ote:
R Actual battery performance depends on usage
and ambient environment. Base unit battery installation (for
p
 ower backup)
You can insert 2 AAA (R03) batteries (not
supplied) into the base unit that will power the unit
temporarily in the event...