Panasonic Kx Tgf380 Operating Instructions Manual

1
9 a  M D N  (Pause)
2 Dial the phone number.  a M N
N

ote:
R A 3.5 second pause is inserted each time  MD N
(Pause) is pressed. Answering calls
1 L

ift the handset and press  M N
 
or  MZ N when
the unit rings.
R To answer a cellular call, you can also press
MCELL N.
2 When you finish talking, press  MOFF N or place
the handset on the charger.
Any key answer:  You can answer the call by
pressing any dial key.
Auto talk:  You can answer calls simply by lifting
the handset (page 42).
Temporary ringer...

Temporary tone dialing for landline
c alls (for rotary/pulse service users)
Press  * (TONE) before entering access numbers
which require tone dialing. Handset clarity booster
T
 his feature can improve sound clarity when the
handset is used in an area where there may be
interference. During an outside call, this feature is
turned on automatically when necessary.
R When this feature is turned on,   is
d

isplayed. However, during a cellular call,  is not displayed even though the feature is
a

ctivated....

M
MENU N a  M b N:  “Conference ” a
M SELECT N
R To leave the conference, press  MOFF N. The
other 2 parties can continue the
conversation.
R To put the outside call on hold:  MMENU N a
M b N:  “Hold ” a  M SELECT N
To resume the conference:  MMENU N a
M b N:  “Conference ” a  M SELECT N
R To cancel the conference:  MMENU N a  M b N:
“ Stop conference ” a  M SELECT N
You can continue the conversation with the
outside caller. Transferring a cellular call between
t

he handset and a cellular phone...

Making cellular calls
I mportant:
R The unit can be used to talk on 2 lines at the
same time (for example, 2 cellular lines, or the
landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with the
unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
R Before making calls, confirm that the
corresponding CELL indicator on the base unit
lights up (page 14).
1 Dial the phone number.
RTo correct a digit, press  MCLEAR N.
2 Press  MCELL 1 N or  MCELL 2 N.
3...

Pause (for PBX/long distance service users)
A  pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed
(page 34).
Example:  If you need to dial the line access
number “9” when making outside calls with a PBX:
1 9 a  M PAUSE N
2 Dial the phone number.
3 Lift the corded handset.
Note:
R A 3.5 second pause is inserted each time
MPAUSE N is pressed. Answering calls
1 L

ift the corded...

Note:
R
P
lease contact your phone service provider for
details and availability of this service in your
area. Temporary tone dialing for landline
c
 alls (for rotary/pulse service users)
Press  * (TONE) before entering access numbers
which require tone dialing. Call share
Y
 ou can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line, press  MCELL 1 N or  MCELL 2 N,
then lift the corded handset.
– for the landline, lift the corded handset.
Note:
R A...

Intercom
I ntercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
R If you receive an outside call while talking on the
intercom, the interrupt tone sounds (page 41).
–Handset:  To finish intercom, press  MOFF N.
To answer the call, press  M N
.
– B

ase unit:  To finish intercom, place the
corded handset on the cradle. If the
speakerphone is used, press  MZ N. To answer
the call, lift the corded handset. If...

Using the 
MC ALL BLOCKN
button
You can press the  MCALL BLOCK N button in the
following situations to disconnect the current call
and add a phone number to the call block list:
– when an incoming call is being received
– when an incoming call is being recorded by the answering system
– when talking on an outside call
Once a phone number has been added to the call
block list, the unit will block calls from that phone
number in the future. Handset / Base unit
1 P

ress  MCALL BLOCK N under the situations...

6
MSAVE N a  M OFF N Base unit
1 MC

IDN
2 Mb N: Select the entry to be blocked.
R To edit the number: Press  MEDIT N
repeatedly until the phone number is shown
in the 10-digit format.
3 MCALL BLOCK N
4 Mb N:  “Yes ” a  M SELECT N
5 Edit the phone number if necessary (24 digits
max.).
6 MSAVE N a  M EXIT N Adding call blocked numbers manually
Handset
1 MC

ALL BLOCK N
2 Mb N:  “Block a single number ” a
M SELECT N
3 MMENU N a  M b N:  “Add ” a  M SELECT N
4 Enter the phone number (24 digits max.).
5...

To erase a number:
M
E
RASE N a  M b N:  “Yes ” a  M SELECT N a
M OFF N Base unit
1 MC

ALL BLOCK N
2 Mb N:  “Block a single number ” or  “Block
range of numbers ” a  M SELECT N
3 Mb N: Select the desired entry.
R After viewing, press  MEXIT N to exit.
4 To edit a number:
MEDIT N a  Edit the number.  a M SAVE N a
M EXIT N
To erase a number:
M ERASE N a  M b N:  “Yes ” a  M SELECT N a
M EXIT N
Note:
R When editing, press the desired dial key to add
digits and press  MCLEAR N to erase digits. Erasing all...