Panasonic Kx Tg762 Operating Instructions Manual

n
 Using the landline  Handset
1 MF N 

CID
2 Press  MC N to search from the most
recent call, or  MD N to search from the
oldest call.
3 To call back, press  M N
.
T

o exit, press  MOFF N.  Base unit
*
 1
*1 KX-TG7641 series: page 3
1 M N
 
CID
2 Press  MC N to search from the most
recent call, or  MD N to search from the
oldest call.
3 To call back, press  MSP-PHONE N.
To exit, press  Mn N (EXIT).
Note for handset and base unit:
R If the entry has already been viewed
or answered, “ ” is displayed,...

4
Using a cellular line:
To make a cellular call, continue
from step 3, “Viewing the caller list
and calling back”, page 50.
Using the landline:
MSP-PHONE NCaller ID number auto edit
f

eature  Handset /   Base unit
*
 1
*1 KX-TG7641 series: page 3
Once you call back an edited number,
the unit which was used to call back
remembers the area code and format of
the edited number. The next time
someone calls from the same area
code, caller information is customized by
the unit as follows:
– When the call is...

repeatedly until the phone
n
umber is shown in the desired
format.
3 MSAVE N
4 Mb N:  “Phonebook ” a  M SELECT N
5 Continue from step 3, “Editing
entries”, page 37.  Base unit
*
 1
*1 KX-TG7641 series: page 3
1 M N
 
CID
2 Mb N: Select the desired entry.
R To edit the number, press  MEDIT N
repeatedly until the phone
number is shown in the desired
format.
3 M N
 a  M b N:
  “Yes ” a  M N
4 Mn N 
(EXIT)
Note:
R If you stored caller information to the
phonebook using the base unit, the
entry is...

Copying phonebook
f
rom a cellular phone
(phonebook transfer)
You can copy phonebook entries from
the registered cellular phones or other
cellular phones (not registered) to the
unit’s shared phonebook. A cellular
phone must be Bluetooth wireless
technology compatible.
Important:
R If a copied entry has 2 or more phone
numbers, each phone number (6
max.) is stored as a separate entry
with the same name.
R If a phonebook entry includes
additional data such as a picture, that
entry may fail to copy to the...

Using a Bluetooth
w
ireless headset
(optional) for landline
calls
By registering a Bluetooth headset to the
base unit, you can have a hands-free
conversation wirelessly for landline calls.
Important:
R 1 headset can be registered to the
base unit. However, only one
Bluetooth device (cellular phone or
headset) can be connected to the
base unit at a time.
R For best performance, we
recommend using a Bluetooth
headset within 1 m (3.3 feet) of the
base unit. A headset can
communicate with the base unit...

Answering landline calls with your
h
eadset
To answer a landline call, turn on your
headset referring to your headset
operating instructions.
When you finish talking, turn off your
headset referring to your headset
operating instructions.
Note:
R If you cannot hang up the call using
your headset;
– press  Mn N (STOP) on the base unit.
(KX-TG7621 series: page 3)
– press  MSP-PHONE N on the base
unit 2 times. (KX-TG7641 series:
page 3) Switching between the base unit and
y

our headset
You can switch...

Answering system for
l
andline
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
You can also set the unit to play a
greeting message but not to record
caller messages by selecting
“ Greeting only ” as the recording
time setting (page 62).
Important:
R Only 1 person can access the
answering system (listen to
messages, record a greeting
message, etc.) at a time.
R When callers leave messages, the
unit records the day and time of each
message. Make sure...

can be set for each handset. The default
s
etting is  “On ”.
1 MMENU N#310
2 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N  Base unit
*
 1
*1 KX-TG7641 series: page 3
To adjust the speaker volume, press  MD N
or  MC N repeatedly. You can answer the
call by pressing  MSP-PHONE N.
To turn off while screening a call, press
M N
 
repeatedly until the sounds goes off.
R If you adjust the speaker volume while
listening to messages or having a
conversation, the speaker volume for
call screening is...

Operating the answering
s
ystem during playback Key Operation
M j N 
or  Mk N*1
M D N or  MC N*2 Adjust the speaker
v
olume
M N
Repeat message *
 3
M N
Skip message
M C
ONF N*2
Pause message
T
o resume playback,
press  M N
.
M n N 
(STOP) Stop playback
M E
RASE NErase currently playing
m essage *1 KX-TG7621 series: page 3
*

2 KX-TG7641 series: page 3
*3 If pressed within the first 5 seconds of a message, the previous
message is played. Calling back (Caller ID
s

ubscribers only)
Available for:
K...

Key Operation
9  or
MSTOP NStop recording
S
top playback
0 Turn answering system off
*4 *
 3
Erase currently playing
m
essage
*5 Erase all messages
*6 Reset to a pre-recorded
g

reeting message *1 If pressed within the first 5 seconds
o
 f a message, the previous
message is played.
*2 To resume playback: Mb N:  “Playback ” a  M SELECT N
*3 You can also erase as follows: MERASE N a  M b N:  “Yes ” a
M SELECT NCalling back (Caller ID
s

ubscribers only)
If caller information is received for the
call, you...