Panasonic Kx Tg762 Operating Instructions Manual

Making cellular calls
Available for:
K X-TG7641 series (page 3) 1
D
ial the phone number.  a Press
M CELL 1 N or  MCELL 2 N.
2 When the other party answers,
speak into the microphone.
RSpeak alternately with the other
party.
3 When you finish talking, press
MSP-PHONE N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from
the base unit to the handset:
With the call sharing mode on
(page 33), press  MCELL N on the
handset.  a M b N: Select the...

Example: 
If you need to dial the line
access number “9” when making outside
calls with a PBX:
19 a  M CONF N
2 Dial the phone number.  a
M SP-PHONE N
Note:
R A 3.5 second pause is inserted each
time  MCONF N is pressed. Repeat as
needed to create longer pauses. Answering calls
W

hen a call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received,
the CELL 1 or CELL 2 indicator and
SP-PHONE indicator flash rapidly.
1 Press  MSP-PHONE N when the unit
rings.
R You...

R
If a call is kept on hold for more than 9
minutes, an alarm tone starts to
sound. After 1 additional minute on
hold, the call is disconnected.
R If another phone is connected to the
same line, you can also take the call
by lifting its handset. Mute
W

hile mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1 Press  MMUTE N during conversation.
R The SP-PHONE indicator on the
base unit flashes.
2 To return to the conversation, press
MMUTE N again. Flash for landline...

Transferring a cellular call
b
etween the base unit and a
cellular phone Transferring a cellular call from the
b

ase unit to a cellular phone
During a cellular call, press and hold
M CELL 1 N or  MCELL 2 N until the
SP-PHONE indicator goes out.
R The cellular call is transferred to the
cellular phone. Transferring a cellular call from a
c

ellular phone to the base unit
During a conversation using a cellular
phone, press  MCELL 1 N or  MCELL 2 N.
R The cellular call is transferred to the
base unit....

Shared phonebook
T
he shared phonebook allows you to
make calls without having to dial
manually. The base unit *1
 and any
handset registered to the base unit can
use the shared phonebook. You can add
3050 names and phone numbers to the
shared phonebook, and assign each
phonebook entry to the desired group
( “ Home ”,  “Cell 1 ”,  “Cell 2 ”).
*1 KX-TG7641 series: page 3
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group
ringer tone features (page...

Erasing the character or number
P
ress  MF N or  ME N.  a  M CLEAR N
R Press and hold  MCLEAR N to erase all
characters or numbers. Groups
G

roups can help you find entries in the
phonebook quickly and easily. When
adding an entry to the phonebook, you
can assign it to one of 3 groups. You
can search for phonebook entries by
group. The group ringer tone feature is
available for Caller ID subscribers
(page 50). Finding and calling from a
p

honebook entry Scrolling through all entries
n
 U

sing a...

R
If there is no entry corresponding
to the characters you selected,
the next entry is displayed.
3 Proceed with the operation for your
unit.
Handset:  M OK N
Base unit:  M N
4 Mb N:

 Scroll through the phonebook if
necessary.
5 To make a cellular/landline call,
continue from step 3, “Scrolling
through all entries”, page 36. Searching by group
 Handset
1 M N
 a  M G
ROUP N
2 Mb N: Select the group you want to
search.  a M SELECT N
R If you select  “All ”, the unit ends
the group search.
3 Mb N: Select...

 Base unit
* 1
*1 KX-TG7641 series: page 3
1 M N
 a  M E
RASE N
2 Mb N: Select the desired group.  a
M N
3 Mb N:

 “ Yes ” a  M N
4 Mb N:

  “ Yes ” a  M N
Chain dial
T

his feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.  Handset /   Base unit
*
 1
*1 KX-TG7641 series: page 3
1 Proceed with the operation...

Programmable settings
Y
ou can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a
M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the...

Sub-menu 1 Sub-menu 2 Settings Code
Greeting
Record greeting* 1
–#30258
Check greeting –#30358
Pre-recorded *
 1
(Reset to pre-recorded
greeting) –
#30458
Settings Ring count*
 1
2–7: 2-7 rings
< 4 rings >
0:  Toll saver #211
62
Recording time *
 1
1: 1 min
3:  
0:  Greeting
only *2 #305
62
Remote code *
 1
 #30660
Screen call 1:   0:  Off #310 57
Answer on *
 1
– –#32757
Answer off *
 1
– –#32857Main menu:   “
V
.M. access ”*3
 (V.M.: Voice mail) Operation Code
Listening to voice mail messages....