Panasonic Kx Tg762 Operating Instructions Manual

2
Enter the desired 3-digit remote
access code.
3 MSAVE N a  M OFF N Deactivating remote operation
P

ress  * in step 2 on “Remote access
code”, page 60.
R The entered remote access code is
deleted. Using the answering system
r

emotely
1 Dial your landline phone number
from a touch-tone phone.
2 After the greeting message starts,
enter your remote access code.
3 Follow the voice guidance prompts
as necessary or control the unit
using remote commands
(page 61).
4 When finished, hang up. Voice guidance
n...

R
You can either hang up, or enter
your remote access code again
and begin remote operation
(page 60). Answering system
s

ettings Number of rings before the
u

nit answers a call
You can change the number of times the
phone rings  “Ring count ” before the
unit answers calls. You can select 2 to 7
rings, or  “Toll saver ”.
The default setting is  “4 rings ”.
“ Toll saver ”: The unit’s answering
system answers at the end of the 2nd
ring when new messages have been
recorded, or at the end of the 5th ring...

message asking callers to call
a
gain later.
– If you use your own message, record the greeting-only message
asking callers to call again later
(page 58). Message alert
Y

ou can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is  “On ”.
Important:
R If you stored the voice mail access
number (page 64), the message
indicator also flashes for newly
recorded voice mail messages from
the landline (page 65).
1 MMENU N#340
2 Mb N:...

Voice mail service for
l
andline
Voice mail is an automatic answering
service offered by your service provider/
telephone company. After you subscribe
to this service, your service provider/
telephone company’s voice mail system
answers calls for you when you are
unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/
telephone company, not your telephone.
Please contact your service provider/
telephone company for details of this
service.
Important:
R...

If you are not sure which setting is
r
equired, contact your service provider/
telephone company. Turning VM tone detection on/off
T

he default setting is  “On ”.
1 MMENU N#332
2 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N Listening to voice mail
m

essages
The unit lets you know that you have
new voice mail messages in the
following ways:
– “New Voice Mail ” is displayed on
the handset and base unit *1
 if
message indication service is
available.
– The message indicator on the handset...

Intercom
I
ntercom calls can be made:
– between handsets
– between a handset and the base unit (KX-TG7641 series: page 3)
Note:
R If you receive an outside call while
talking on the intercom, you hear 2
tones.
– To answer the call with the
handset, press  MOFF N, then press
M N
.
–

To answer the call with the base unit, press  MSP-PHONE N 2 times.
(KX-TG7641 series: page 3)
R When paging unit(s), the paged
unit(s) beeps for 1 minute. Making an intercom call
 Handset
1 MM

ENU N a  M INT N
2 Mb N: Select...

Transferring calls,
c
onference calls
Outside calls can be transferred or a
conference call with an outside party can
be made:
– between 2 handsets
– between a handset and the base unit (KX-TG7641 series: page 3)  Handset
1 D

uring an outside call, press  MINT N
to put the call on hold.
2 Mb N: Select the desired unit.  a
M SELECT N
3 Wait for the paged party to answer.
RIf the paged party does not
answer, press  M N
 
to return to
the outside call.
4 To complete the transfer:
Press  MOFF N.
R The...

Wall mounting
N
ote:
R Make sure that the wall and the fixing
method are strong enough to support
the weight of the unit. Base unit (KX-TG7621 series:
p

age 3)
1 Lead the AC adaptor cord and
telephone line cord through the hole
in the wall mounting adaptor in the
direction of the arrow. 2
T
uck the telephone line cord inside
the wall mounting adaptor ( A).
Connect the AC adaptor cord and
telephone line cord ( B). 3
I
nsert the hooks on the wall
mounting adaptor into holes   and
 on the base unit.
4
A...

5
Mount the unit on a wall then slide
down to secure in place. To remove the wall mounting adaptor
W

hile pushing down the release levers
( A ), remove the adaptor ( B). Base unit (KX-TG7641 series:
p

age 3)
The base unit can be mounted on a wall
by revolving the bracket to “WALL”
position (default: “DESK” stand position).
1 Turn the bracket 180 degrees
counterclockwise in the “WALL”
direction until a click is heard. R
T
he bracket cannot be removed.
Do not turn the bracket more than
180 degrees.
2...

3
Mount the unit on a wall then slide
down to secure in place. To stand on a desk
T

urn the bracket 180 degrees clockwise
from the “WALL” position to the “DESK”
direction until a click is heard. Charger
D

rive the screws (not supplied) into the
wall. 70
For assistance, please visit http://www.panasonic.com/helpUseful Information83 mm 
(31/4 inches)
or
102 mm 
(4 inches)
83 mm
(31/4 inches) Wall phone plate
102 mm
(4 inches)
1
2
1
2 Bottom 25.4 mm
(1 inch)
Screws
Hooks