Panasonic Kx Tg2740 Operating Instructions Manual

23
SP-phone Line1
00-00-10
I=Privacy
71
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
Call Share
This feature allows the handset or the base unit to join the existing
external call. 
When the system has one or more additional handsets (p. 31), a handset
user can join another handset user’s conversation.
To join a conversation (Call Share)
Handset:
Press the relevant soft key ( or  ).
Base unit:
Press the relevant line button.
•A maximum of three units can take part in a...

Room Monitor Feature
72
This feature allows you to monitor a room through the handset or the base unit
by using the intercom feature. For example you can monitor a baby from
different areas of the house. You can call the handset or the base unit using the
extension number, to monitor the room. The called unit will not ring. When the
system has one or more additional handsets (p. 31), a handset user can monitor
through another handset. If you allow other users to monitor through your
handset or base unit,...

To monitor with the handset
1
Press (HOLD)(INTERCOM).
2
Press the right soft key ( ).
3
To call the base unit, press (0). 
To call another handset (when the system
has additional handsets, p. 31): 
Enter the extension number using the
dialing button (
(1)to (8)).
•Your handset will start to monitor the room through the destination unit and
“Room monitor” will display.
•To monitor from the speaker, press  . You can place the handset on the charger but
you cannot place it on the base unit to continue...

To turn the 2-Way Radio mode on
Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “2Way radio mode” by pressing
Öor Ñ.
3
Press á.
4
Select “On” by pressing Öor Ñ.
5
Press the right soft key ( ).
•A beep sounds and the mode will turn on.
•You can exit the programming mode any time by pressing (OFF)
.
To turn the mode off:
Place the handset on the base unit or the charger.
•You can also turn the mode off by performing the three procedures: (1) press
(CONF/FUNCTION), (2) select...

75
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
To call another handset
Make sure the mode is on on your handset and the destination handset
and the displays show “2Way radio mode”.
1
Press ,  or (HOLD)(INTERCOM).
2
Enter the extension number using the
dialing button (
(1)to (8)).
•The called handset will ring for 1 minute.
•To stop calling, press (OFF).
3
When the called party answers, talk into the
handset.
•After a few seconds, the display will show the
length of the call.
•You...

Muting Your Conversation
During a call, you can make the other party not
listen to you. When muting your conversation,
you can hear the other party.
For the handset;press the right soft key ( ).
•“Mute” will be displayed for a few seconds and
“ ” will flash.
•
To release the mute, press the right soft key ( ).
•When you switch between the receiver and speaker,
the mute will be released. 
For the base unit;press (MUTE). 
•“Mute” will be displayed for a few seconds and the MUTE indicator will light.
•To...

77
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
How to Use the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press (PAUSE/REDIAL)on the handset or
(REDIAL/PAUSE)on the base unit if a pause is required for dialing with a
PBX or to make a long distance call.
Ex. Line access number 
(9)(PBX)
(9)\(PAUSE/REDIAL)or (REDIAL/PAUSE)\
•Pressing (PAUSE/REDIAL)or (REDIAL/PAUSE)once creates a 3.5 second
pause. This prevents misdialing when you redial or dial a stored...

Special Features
78Base unit
Make sure the base unit is not being used.
1
Press (FUNCTION), and scroll to “Ringer
setting” by pressing
Öor Ñ, and press
á.
2
Scroll to “Ringer tone” by pressingÖor
Ñ, and press á.
3
Press Ö(Line 1) or Ñ(Line 2) to select
the line.
•The line’s current setting will be displayed.
4
Select the desired ringer tone by pressing
Öor Ñ.
•Each time you press Öor Ñ, the tone will
change and ring. If the ringer volume has been
set to OFF for the line, the base unit will not ring
(p....

79
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
With the base unit
Make sure the base unit is not being used.
1
Press (FUNCTION).
2
Scroll to “Initial setting” by pressing
Öor Ñ,and press á.
3
Scroll to “Set tel line” by pressing Ö
or Ñ, and pressá.
4
Scroll to “Set flash time” by pressing Ö
or Ñ, and pressá.
5
Press Ö(Line 1) or Ñ(Line 2) to select
the line.
•The line’s current setting will be displayed.
6
Select the desired time by pressing Öor
Ñ.
7
Press á(Save).
•A beep...

Base unit
Make sure the base unit is not being used.
1
Press (FUNCTION), and scroll to “Initial setting” by pressing
Öor Ñ, and press á.
2
Scroll to “Set tel line” by pressingÖ
or Ñ, and press á.
3
Press áat “Line selection”.
•The current setting will be displayed.
4
Select the desired line selection, “Line1”,
“Line2” or “Auto”, by pressing 
Öor Ñ,
and press 
á(Save).
•A beep sounds.
•To exit the programming mode, press (STOP/EXIT).
Special Features
80
Line Selection
The handset and base unit will...