Panasonic Kx Tg2700 Operating Instructions Manual

This feature allows you to monitor a room through the handset or the base unit
by using the intercom feature. For example you can monitor a baby from
different areas of the house. You can call the handset or the base unit using the
extension number, to monitor the room. The called unit will not ring. When the
system has one or more additional handsets (p. 21), a handset user can
monitor through another handset. If you allow other users to monitor through
your handset or base unit, turn the feature on. If...

Room Monitor Feature
52
SPPRIVACY[1]
Press extension#
to call
MONITOR
Press extension#
for room monitor
Room monitor01
To monitor with the base unit
1
Press (LOCATOR/INTERCOM/TRANSFER), and press (MUTE).
•The LOCATOR/INTERCOM/TRANSFER indicator light flashes.
2
To call the handset, enter the extension number using the dialing
button (
(1)to (8)).
•The base unit will start to monitor the room through the handset.
•The handset will display “Room monitor”.
3
To end monitoring, press...

53
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
To turn the 2-Way Radio mode on
Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “2Way radio mode” by pressing
Öor Ñ.
3
Press á.
4
Select “On” by pressing Öor Ñ.
5
Press the right soft key ( ).
•A beep sounds and the mode will turn on.
•You can exit the programming mode any time by pressing (OFF)
.
To turn the mode off:
Place the handset on the base unit or the charger.
•You can also turn the mode off by...

2-Way Radio Function (When the System Has
Additional Handsets)
54To call another handset
Make sure the mode is on on your handset and the destination handset
and the displays show “2Way radio mode”.
1
Press ,  or (HOLD)(INTERCOM).
2
Enter the extension number using the
dialing button (
(1)to (8)).
•The called handset will ring for 1 minute.
•To stop calling, press (OFF).
3
When the called party answers, talk into the
handset.
•After a few seconds, the display will show the
length of the call.
•You can...

Voice mail service is an electronic on-line answering system offered by
your telephone company. After subscribing, the voice mail system can
answer calls automatically for you when your line is busy or if calls are not
answered, and caller can leave their messages at the voice mail box
virtually located at the telephone company. After the voice mail box having
received messages, the unit will indicate it in two ways: (a) “Voice mail”
displayed on the handset, and (b) “” on the handset and the VM...

Voice Mail Service
56
*For quick access to your voice mail box by usingthe right soft key ( ) on
the handset 
or (VM)on the base unit, you may add pauses between your
voice mail box access number and your mail box password in step 5.
EX. 1-222-333-4444 PPPP 8888
Your voice mail box access number  Your mail box password
Pauses
Pressing (PAUSE/REDIAL)once creates a 3.5 seconds delay and counts as
one digit. The delay time depends on a telephone company.MAIL
Setting the Voice Mail (VM) Tone Detection
Your...

57
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Listening to Voice Mail Messages
After the voice mail box having received messages, the unit will indicate it
in two ways: (a) “Voice mail” displayed on the handset, and (b) “”
on the handset and the VM indicator on the base unit will flash. To listen
to your voice mail message(s), follow the steps below.
Handset
1
Press the right soft key ( ), and press
or .
•The handset is connected to the telephone line
and dials the access number...

For Call Waiting Service Users
Press (FLASH/CALL!WAIT)if you hear a call-waiting tone while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press (FLASH/CALL!WAIT)again.
•The call waiting service cannot be used when :
– the first call is placed on hold, or
– a parallel connected telephone is in use.
•If this function does not operate properly, consult your telephone company for
details.
Call Waiting Caller ID Feature
Call Waiting Caller ID Feature...

59
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing (FLASH/CALL!WAIT)also allows you to use special features of
your host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting. 
•Pressing (FLASH/CALL!WAIT)causes to disable the Temporary Tone Dialing
mode or the mute (p. 58).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times:...

Special Features
60
Ringer Tone
You can select the handset or the base unit ringer tone out of 6 patterns
for external calls. When an external call is being received, the handset
and base unit ring in the selected tone. Your phone comes from the
factory set to “1”.
Handset
Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “Ringer setting”by pressing
Öor Ñ, and press á.
3
Scroll to “Ringer tone”by pressingÖor
Ñ, and press á.
•The current setting will be displayed.
4
Select the...