Panasonic Kx Tg2564 Operating Instructions Manual

4
Connect the telephone line cord. 
Mount the base unit, then slide 
down.
≥Raise the antennas.
Charger unit
The charger can be wall mounted. Connect the AC adaptor. Install screws
using the wall template (p. 60). Mount the charger (1). Slide it down (2),
then slide down to the right (3) until it is secured.
61For assistance, please call: 1-800-211-PANA(7262)
Useful Information
1
2
3
Screws
To Power 
Outlet
Wall Phone 
Plate
To temporarily set the handset down
during a conversation, place it as
shown...

62
Optional Headset
Plugging an optional headset into the cordless handset allows a hands-
free phone conversation. Please use only the Panasonic KX-TCA88
headset. To order, call the accessories telephone number on page 2.
Connecting the optional headset to the cordless handset
Open the headset jack cover, and connect the optional headset to the
headset jack as shown below.
When the optional headset is connected to the cordless handset,
make sure to use the headset to talk with the caller. If you want...

63For assistance, please call: 1-800-211-PANA(7262)
Useful Information
Battery Replacement
If “Recharge battery” is displayed and/or “” flashes after a few
telephone calls even if the battery was fully charged, replace the battery
with a new Panasonic PQP510SVC (P-P510) battery. To order, call the
accessories telephone number on page 2.
Push 
forward.
Red 
Lead
Black 
Lead
A nickel cadmium battery that is recyclable powers the
product you have purchased. At the end of its useful life,
under various state...

If the unit detects a problem, one of the following messages will be
displayed on the cordless handset or the base unit.
Cordless handset display
The battery needs to be charged. Place the
cordless handset on the charger to charge the
battery (p. 12).
The cordless handset has lost communication
with the base unit. Move closer to the base unit
and try again.
When trying to store an item or Caller List
information in the directory, the directory
memory is full (p. 36, 40). To erase other stored
items from...

65For assistance, please call: 1-800-211-PANA(7262)
Useful Information
While the base unit was being used, (›)or (‹)
was pressed to search the Caller List/directory
list, 
(fl)was pressed to select an option or
(CLEAR/INTERCOM/HOLD)was pressed.
While storing items in the directory, the cordless
handset has lost communication with the base
unit. Move closer to the base unit and try again.
The display will be shown while the base unit is
engaged in an outside call.
Base unit display
When the clock needs...

Troubleshooting
66
Problem
“No link to base.
Walk closer to base &
try again” is displayed on
the cordless handset display
and an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The cordless handset does
not ring.
The cordless handset
display is blank.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the
program/search.
Cause and Remedy
≥You are too far from the base unit.
Move...

67For assistance, please call: 1-800-211-PANA(7262)
Useful Information
“
Problem
The cordless handset does
not display the caller’s name
and/or phone number.
The cordless handset
display exits the Caller List
or directory.
When a second call is
received during a
conversation, the cordless
handset does not display the
new caller’s name and/or
phone number.
You cannot page the base
unit.
You cannot redial by
pressing 
(REDIAL/PAUSE).
Cause and Remedy
≥You need to subscribe to a Caller ID
service.
≥Other...

“ Troubleshooting
68
Problem
You cannot have a
conversation using the
cordless handset.
You cannot have a
conversation using the
optional headset.
Cause and Remedy
≥When the optional headset is connected
(p. 62), you must use the headset to talk
with the caller. To have a normal
cordless phone conversation, disconnect
the headset.
≥Make sure that the headset is
connected properly (p. 62).
Problem
The base unit does not ring.
While programming or
searching, the base unit
starts to ring and stops the...

“
69For assistance, please call: 1-800-211-PANA(7262)
Useful Information
Problem
You cannot page a cordless
handset.
You cannot redial by
pressing 
(REDIAL).
Cause and Remedy
≥The cordless handset is too far from the
base unit.
≥The cordless handset is engaged in an
outside call or viewing the Caller
List/directory list. Try again. Wait until
“Portable in use” disappears.
≥If the last number dialed was more than
32 digits long, the number will not be
redialed correctly.
Problem
The unit does not work....

“ Troubleshooting
70
Problem
Previously programmed
information is erased.
“Recharge battery” is
displayed on the cordless
handset, “” flashes or
the unit beeps intermittently.
You charged the battery
fully, but “Recharge
battery” is still displayed
and/or “” continues to
flash.
If you cannot solve your
problem
Cause and Remedy
≥If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
≥Charge the battery fully (p. 11).
≥Clean the charge contacts and charge
again (p. 12)....