Panasonic Kx Tg2564 Operating Instructions Manual

Charger unit
≥USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G).
≥The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
Battery Charge
Place the cordless handset on the charger and
charge for about 15 hoursbefore initial use.
≥Make sure the cordless handset faces forward as
shown.
≥The CHARGE indicator lights and a beep sounds.
≥Charge time may be longer than 15 hours depending 
on circumstance noise condition.
Battery strength
You can...

Recharge battery
12
“Settings
OperationApprox. battery life
While in use
(TALK)Up to about 4.5 hours
Up to about 3.5 hours
Up to about 11 days While not in use (Standby)
near the base unit*
away from the base unit
Recharge
Recharge the battery when:
—“Recharge battery” is displayed,
—“ ” flashes on the display, or
—the cordless handset beeps intermittently
while it is in use.
≥If you DO NOT recharge the cordless handset battery for more than 15 minutes,
the display will continually indicate “Recharge...

Date:2002.04.15
0-9=Date     
21
434=Next
Date and Time (Base\Unit)
Make sure the base unit and cordless handset are not being used.
1
Press (FUNCTION/EDIT).
2
Press (fl)(Yeskey) at “Date and time”.
3
Enter the current date (year, month, and
day) using 4-digit numbers. 
(Ex. To set Apr. 15, 2002, enter “2002” 
and “0415”.)
4
Press (›)(Nextkey).
5
Enter the current time (hour and minute)
using a 4-digit number. 
(Ex. To set 9:30, enter “0930”.)
6
Select “AM” or “PM” by pressing ($). 
7
Press (›)(Nextkey)....

14
“Settings
For Caller ID service users (p. 29)
≥The Caller ID information will reset the clock after the first ring if the
adjusted time and/or date is incorrect.
≥If the time has not previously been set, the Caller ID information will not
adjust the clock.
≥The Caller ID information will automatically adjust the clock for daylight
saving time.
If a power failure occurs, the time/date flashes on the base unit
display. Adjust the date/time. 

15For assistance, please call: 1-800-211-PANA(7262)
Preparation
Dialing Mode(Cordless\Handset)
You can program the dialing mode using the cordless handset near the
base unit. If you have touch tone service, set to “Tone”. If rotary or pulse
service is used, set to “Pulse”. Your phone comes from the factory set to
“Tone”.
Make sure the base unit and cordless handset are not being used.
1
Press (MUTE/FUNCTION).
2
Scroll to “Program” by pressing (›)or (‹).
3
Press(fl)(Yeskey).
4
Scroll to “Set dial mode” by...

16
“Settings
Line Mode (Cordless\Handset)
You can program the line mode using the cordless handset near the
base unit. If the line is connected to a low voltage system such as a PBX,
set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used
(p. 57). Your phone comes from the factory set to “A”.
Make sure the base unit and cordless handset are not being used.
1
Press (MUTE/FUNCTION).
2
Scroll to “Program” by pressing (›)or (‹).
3
Press(fl)(Yeskey).
4
Scroll to “Set line mode” by pressing...

17For assistance, please call: 1-800-211-PANA(7262)
Preparation
Programmable Functions“
You can program the following function items using the cordless
handset near the base unit. The display shows the programming
instructions. See the corresponding pages for function details.
Make sure the base unit and cordless handset are not being used.
During programming
*To select a desired function item, scroll through the items by pressing
(›)or (‹). Then press(fl)(Yeskey) to go to the next step.
≥You can exit the...

18
“Programmable Functions
You can program the following function items using the base unit. The
display shows the programming instructions. See the corresponding
pages for function details.
Make sure the base unit and cordless handset are not being used.
During programming
*To select a desired function item, scroll through the items by pressing
(›)or (‹). Then press(fl)(Yeskey) to go to the next step.
≥You can exit the programming mode any time by pressing (EXIT).
*
1Date and timeTo adjust the date and...

19For assistance, please call: 1-800-211-PANA(7262)
Preparation
Auto Talk Feature(Cordless\Handset)
The Auto Talk feature allows you to answer a call by lifting the cordless
handset off the charger without pressing  . If you want to use this
feature, turn the feature ON by programming. Your phone comes from the
factory set to OFF.
Make sure the base unit and cordless handset are not being used.
1
Press (MUTE/FUNCTION).
2
Scroll to “Program” by pressing (›)or (‹).
3
Press (fl)(Yeskey).
4
Scroll to “Auto...

20
“Programmable Functions
Ringer Volume
You can program the cordless handset and base unit ringer volumes to
HIGH, LOW or OFF. If set to OFF, the cordless handset and base unit will
not ring. Your phone comes from the factory set to HIGH.
Make sure the base unit and cordless handset are not being used.
(Cordless\Handset)
1
Press (MUTE/FUNCTION).
2
Scroll to “Ringer volume” by
pressing 
(›)or (‹).
3
Press (fl)(Yeskey).
≥The current setting is displayed.
4
Select the desired volume by
pressing 
(›)or (‹)....