Panasonic Kx Tg2356 Operating Instructions Manual

Remote Operation from a Touch Tone Phone
Answering System
For assistance, please call: 1-800-211-PANA(7262)61
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by direct 
commands instead of using the voice menu. To end remote operation, hang up at 
anytime.
Direct commands
To turn on the Answering System:
Call your unit and wait for 15 rings.
• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or enter the...

62
Wall Mounting
This unit can be mounted on a wall phone plate.
1Push the hook and turn it 
upward. Turn the hook until a 
click is heard.
2Press the tabs in the direction 
of the arrows (1), then remove 
the wall mounting adaptor (2).  
3Connect the AC adaptor. Tuck 
the telephone line cord inside 
the wall mounting adaptor, then 
push the adaptor in the direction 
of the arrows (1 and 2).
• The word “UP WALL” should face 
upward.
• Fasten the AC adaptor cord to 
prevent it from being 
disconnected....

Useful Information
For assistance, please call: 1-800-211-PANA(7262)63
Belt Clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip  
Shoulder Rest Attachment
Use the shoulder rest attachment if you need to keep your hands free during a 
phone conversation.
To attach the shoulder rest 
attachment
Attach the included belt clip to the 
handset (see above), then attach the 
shoulder rest attachment to the belt clip 
as shown below....

64
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an optional headset
Open the headset jack cover, and insert the headset plug into the headset jack as 
shown below. 
• Headset sold separately. Model shown here is KX-TCA88.
To switch to the speakerphone while using the...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)65
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], [*] and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume[1] [1]  [0] : Off  [1] : Low  [2] : Medium   
[3] : Highp. 17
Ringer tone 
(for handset)[1] [2] [1]–[3] : Tone pattern 1–3 
[4]–[7] : Melody pattern 1–4
[8]–[9] : Downloaded melody 
pattern 1–2 *
1
p. 18
Incoming call tone 
(for...

Direct Commands
66
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1You need to first download melody data from the openLCR web site.
*2Can be used to activate Caller IQ. See the leaflet included with this unit for more 
information.
*
3For openLCR...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)67
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display message Cause & Remedy
Recharge battery• The battery needs to be charged. Recharge the 
battery (p. 10).
Charge for 6h• The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 10).
No link to base.
Move closer to 
base, try again.• The handset has lost communication with the base...

68
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 67) for the Cause & Remedy.
Telephone System
Problem Cause & Remedy
“No link to base. Move 
closer to base, try 
again.” is displayed and an 
alarm tone sounds.• You are too far from the base unit. Walk 
closer to the base unit.
• Confirm the base unit’s AC adaptor is 
plugged in.
• Raise the base unit antenna.
• If the above remedies do not solve the 
problem, the handset may have lost...

For assistance, please call: 1-800-211-PANA(7262)69
Troubleshooting
Useful Information
You cannot redial. • If the last number dialed was more than 
48 digits long, the number will not be redialed 
correctly.
You cannot make long 
distance calls.• Please make sure you have long distance 
service.
• Check if Caller IQ is on. Turn Caller IQ off 
(p. 73).
The handset does not display 
the caller’s name and/or 
phone number.• You need to subscribe to Caller ID.
• Other telephone equipment may be 
interfering...

Troubleshooting
70
Answering System  
The handset display exits the 
Caller List or phone book.• Do not pause for over 60 seconds while 
searching.
The Ringer/Message Alert 
indicator flashes slowly when 
the handset is not ringing and 
in use.• The Message Alert is turned on and new 
messages have been recorded. Turn the 
Message Alert off (p. 24) or listen to the new 
messages (p. 54, 55, 58).
You cannot have a 
conversation using the 
headset.• Make sure the optional headset is connected 
properly (p....